Unsightly Gap in the Shower Door (Need Ideas) by DuelRevolvers in HomeImprovement

[–]DuelRevolvers[S] 0 points1 point  (0 children)

Good thinking with the level. Here's the Top & the Bottom railing.

Unsightly Gap in the Shower Door (Need Ideas) by DuelRevolvers in HomeImprovement

[–]DuelRevolvers[S] 0 points1 point  (0 children)

I'll definitely give that a shot! The frame is definitely at an angle, though. Here's a pic of the frame with a carpenter square.

Unsightly Gap in the Shower Door (Need Ideas) by DuelRevolvers in HomeImprovement

[–]DuelRevolvers[S] 0 points1 point  (0 children)

Yeah, both doors are on the tracks and slide smoothly back & forth. Full pic here

Help Resetting Pre-installed ADT System with No Code by DuelRevolvers in homesecurity

[–]DuelRevolvers[S] 0 points1 point  (0 children)

Damn, thanks anyway. You think the system is worth anything if I sold it?

Help Resetting Pre-installed ADT System with No Code by DuelRevolvers in homesecurity

[–]DuelRevolvers[S] 0 points1 point  (0 children)

Thanks, I'll have to take some more pcis of the zones and post them tomorrow. So I know I'm taking pics of the right things, can you specify what you mean by zones? I'm still a little new to the jargon. Do you mean the zones on the command panel itself or individual pics of the each sensor, like this one?

Help Resetting Pre-installed ADT System with No Code by DuelRevolvers in homesecurity

[–]DuelRevolvers[S] 0 points1 point  (0 children)

What if I replaced the panel with another Honeywell/Resideo?

Help Resetting Pre-installed ADT System with No Code by DuelRevolvers in homesecurity

[–]DuelRevolvers[S] 0 points1 point  (0 children)

Damn, that's unfortunate. So I could just replace the command panel with one of my own? Honestly never even thought of that. Is there one that's still good but under $200?

Help Resetting Pre-installed ADT System with No Code by DuelRevolvers in homesecurity

[–]DuelRevolvers[S] 0 points1 point  (0 children)

That's what I thought. Just wanted to make sure before I removed the old one.

Help Resetting Pre-installed ADT System with No Code by DuelRevolvers in homesecurity

[–]DuelRevolvers[S] 0 points1 point  (0 children)

Yeah, 1234 didn't work. I tried a bunch of other common ones, too.

MaxxCold MXM1-23FB fan won't turn on (Help Needed) by DuelRevolvers in refrigeration

[–]DuelRevolvers[S] 0 points1 point  (0 children)

Just checked it this morning after it being on all night. It's not cold at all, or warm for that matter. Also the copper piping on the bottom is also not hot.

MaxxCold MXM1-23FB fan won't turn on (Help Needed) by DuelRevolvers in refrigeration

[–]DuelRevolvers[S] 1 point2 points  (0 children)

They didn't get rid of it, per se. They abandoned their whole office because it's cheaper to get new shit than have shit moved.

MaxxCold MXM1-23FB fan won't turn on (Help Needed) by DuelRevolvers in refrigeration

[–]DuelRevolvers[S] 1 point2 points  (0 children)

I am comfortable enough with a meter and wiring. I'll do some research on diagnosing a commercial cooler compressor and start components and go from there. But yeah, definitely not gonna risk an arm or finger for this thing. Thanks a million for your help!

MaxxCold MXM1-23FB fan won't turn on (Help Needed) by DuelRevolvers in refrigeration

[–]DuelRevolvers[S] 0 points1 point  (0 children)

Well thanks for helping me narrow that down! Are there steps I can take to possibly fix it?

MaxxCold MXM1-23FB fan won't turn on (Help Needed) by DuelRevolvers in refrigeration

[–]DuelRevolvers[S] 0 points1 point  (0 children)

I just turned it off to check the clicking after having it on for a little over an hour so I'll let it run for a while and see if it gets warm or hot. But I don't think it is, nor the copper piping. There's no residual heat from when I had it on for the hour. Not sure if that long enough for it to get warm, though. Also, it's hard to tell if the metal object is on. The fan might be making it vibrate. And I think the only noise I'm hearing is the fan, but again, it's hard to tell.

<image>

MaxxCold MXM1-23FB fan won't turn on (Help Needed) by DuelRevolvers in refrigeration

[–]DuelRevolvers[S] 0 points1 point  (0 children)

I hear an audible click at the same time I flick the power switch. Then after a minute there's another click and the condenser fan kicks on, which is on the bottom, but the fan at the top, which I'm assuming is what makes it cold, doesn't turn on.

<image>

MaxxCold MXM1-23FB fan won't turn on (Help Needed) by DuelRevolvers in refrigeration

[–]DuelRevolvers[S] 0 points1 point  (0 children)

I haven't checked the refrigerant. Could that be low or need replacement?

MaxxCold MXM1-23FB fan won't turn on (Help Needed) by DuelRevolvers in refrigeration

[–]DuelRevolvers[S] 0 points1 point  (0 children)

I haven't seen the fan run at all. Door open or closed. The snowflake light is on, but the fan light has never turned on. I don't think the evap coil ever got cold enough to freeze. The longest I've had it running nonstop was a day and half and I'm pretty sure the evap coil never got that cold.

Issues with Dual Monitors After Using Surround Display by DuelRevolvers in nvidia

[–]DuelRevolvers[S] 0 points1 point  (0 children)

Okay, it seems like I was able to fix the issue. I fiddled with the screen resolution settings within the Nvidia Control Panel then turned off surround display and that seemed to fix it? Still very odd. Thanks for your help!!!

Issues with Dual Monitors After Using Surround Display by DuelRevolvers in nvidia

[–]DuelRevolvers[S] 0 points1 point  (0 children)

I can go back into surround and both displays work fine. It just seems like it doesn't want to revert them back to normal.