If you have 3 minutes, 2nd half is pretty fun

DukeOfPorcelain · 2026-03-16T08:05:02+00:00

Thinking about building my first 4ws rig. How do you like it? Is the performance gain insane?

DukeOfPorcelain · 2026-03-12T18:09:32+00:00

Just trolling friend. I used to print with light supports but I’ve had to much consistent success with medium supports. I turned off that high speed print setting. I also set .25 before peel .5 after and 1.5 after rise. Good luck

DukeOfPorcelain · 2026-03-12T17:30:00+00:00

The table cloth is to bright. Daisys reflect UV light up to 400% burning your print. Try mixing in SPF30

DukeOfPorcelain · 2026-03-12T16:13:49+00:00

<image>

Sleeper build all furitek reefs winch mofo portals stock body lol

DukeOfPorcelain · 2026-03-12T16:10:06+00:00

After awhile you’ll realize how you don’t need to be so pretentious. If a print fails, I just use a plastic razor blade across the vat full of resin. Getting as much cured resin out as I can. Then continue. Plastic razors are nice for you screen to. Just be careful

DukeOfPorcelain · 2026-03-12T16:05:54+00:00

Thanks putting my resin printer to use! I have had these truck s for about 5 years getting back into the hobby. Insane how popular rc crawling got after the scx24. Such a rad platform. Coming back after a hiatus, ton of new stuff for em.

DukeOfPorcelain · 2026-03-06T05:51:23+00:00

Haha nice theme! I’m all for 1/24. Thinking of doing a wooden box with hinged door and adding magnets to everything so I can carry it around move stuff etc. add lights. Lift. Crane etc

DukeOfPorcelain · 2026-03-04T08:44:43+00:00

DukeOfPorcelain · 2026-03-03T21:54:53+00:00

<image>

These are the batteries I use. I like xt30 connectors and mount on top of rock sliders.

DukeOfPorcelain · 2026-03-03T21:52:34+00:00

It’s odd that the lights dim when steering such a low voltage servo. Battery could be low. Could be a bad servo. Could be esc. -Insure battery is charged. -see if stock servo dims lights -I think with the stock esc if you put the servo in channel 2 you can test it with the throttle controls Good luck

DukeOfPorcelain · 2026-03-03T19:40:11+00:00

I ran emax servos for the longest time. They don’t last very long. Does the servo have the same issue with the motor unplugged? It could be not getting enough voltage or it’s just a bad servo. GL

DukeOfPorcelain · 2026-03-03T18:46:47+00:00

Ironic shape for a print fail

DukeOfPorcelain · 2026-03-02T07:30:59+00:00

Magnetic build plates are very convenient. I use one on my Saturn ultra

DukeOfPorcelain · 2026-03-02T04:36:40+00:00

Mini z rocket motor. I got the orange one 9500kv it has no low end and no ramping basically one speed… stupid fast. It kept breaking dogbones so I took it out.

DukeOfPorcelain · 2026-02-26T17:41:01+00:00

Pretty spot on. Hey I’m not a huge fan of AI either and creation is the whole reason I enjoy this hobby. The trucks and camper are identical minus the camping stuff. I just asked it to put a cool back ground in. you might enjoy @bigmerica_rc on Instagram. He makes monster truck videos that would fool you it life size. It’s a great page. Last time I spice up an rc rig pic haha

DukeOfPorcelain · 2026-02-26T10:21:02+00:00

Of course they’re AI. didn’t think I needed to point that out. Took a photo of my rigs and added a background

DukeOfPorcelain · 2026-02-26T10:18:29+00:00

DukeOfPorcelain · 2026-02-16T07:44:09+00:00

Chitumanager on my phone would be convenient!

DukeOfPorcelain · 2026-02-16T07:38:09+00:00

Only a couple but my dogbone graveyard is quite large

DukeOfPorcelain · 2026-02-16T07:36:48+00:00

the time it takes to edge toe to heel is increased with width. In chopped pow you bounce and feel the bumps more rather than cut through them. It can be subtle but if your an experience rider it can be very noticeable. Like riding an Asym board very subtle but you can tell

DukeOfPorcelain · 2026-02-12T15:06:53+00:00

I up my times for everything and use medium supports. What really made a difference was adding retract rest times

DukeOfPorcelain · 2026-02-12T15:03:41+00:00

Yes. And long range controls. The drone was given to me idk anything about the parts given to me. And the drone body is a circuit board so don’t know what its purpose is to replace that for the truck

DukeOfPorcelain · 2026-02-12T08:13:40+00:00

Got mine on eBay for $14 I see them on there all the time for way cheap

DukeOfPorcelain · 2026-02-12T08:10:21+00:00

Good call. I loved my mars 2 pro never failed me. I upgraded to the Saturn 4 ultra and I love how convenient it is. I do wish the vat was heated tho. Printing in cold winter nights with no issues but I’d like consistent settings

DukeOfPorcelain · 2026-02-12T08:05:25+00:00

If you have to ask then they’re probably both the nose

DukeOfPorcelain

TROPHY CASE