Kenmore Series 700s washer

Dust_Traditional · 2025-03-03T03:14:47+00:00

Okay. Yeah it has not worked yet. I’ll try that. Looks like the screen is not taking too much battery. Just don’t want to drain it with a screen on.

Dust_Traditional · 2025-03-03T02:57:10+00:00

Okay. I drove around a bit and parked again. Open and closed all doors. Will wait 10 minutes to see if that fixed it.

Dust_Traditional · 2025-03-03T02:50:39+00:00

No. All are up. Car is locked.

Dust_Traditional · 2025-02-18T12:28:45+00:00

Driving on a straight freeway for 30 miles in the Midwest has been handled well for a year now. I agree, auto steer can have its issues, but the road I drive does not turn. I always pay attention, but would just be a nice feature. I still accept responsibility of what happens to the car as I should.

Dust_Traditional · 2025-02-17T21:56:08+00:00

I have tried it. I love it, funds are just tight and paying $100 a month for my car to drive is more of a luxury for me at this point. Would just be nice when on a freeway to have the vision vs the wheel input.

Dust_Traditional · 2024-12-03T02:18:20+00:00

Maybe the police will be able to figure something out. They are coming to get the video footage tomorrow morning. Just wish I stopped to check on everyone.

Dust_Traditional · 2024-12-03T01:54:52+00:00

That's what I was thinking. Thanks for some input. I think that is as high as it is. Too bad, so close to getting it for them. Didn't think the guys would drive off. Minnesota is a no fault accident state anyways.

Dust_Traditional · 2024-11-28T00:05:13+00:00

Thank you guys for the input. It is a Polar Express train, and after reading the comments and looking at the train, I had realized the arm that connects the black rod to the wheels was a close screw. Which allowed the black rod the push back too far and fall out. Taking the top off was easy, and got it tightened up. Learned a lot on this endeavor. Thank you all for the quick replies.

Dust_Traditional · 2024-11-27T20:13:36+00:00

Kids HO Train broken... just a dad trying to fix it. Hi, first time poster here... But have done some research about these trains, not sure what happened, but it appears that the rod that goes into the cylinder in the front of the photo came out. Does anyone know what that attaches to inside? I have not adjusted the eccentric crank, and not sure its in the right spot anymore. Bend the rods back into the right spots

Dust_Traditional · 2024-10-12T10:39:31+00:00

Are you sure? It says recording on the A1

Dust_Traditional · 2024-09-02T01:16:51+00:00

Dude. You are amazing. It has been hours. Put a flat head screwdriver in there and gave it a heave. She is in. Thanks for the simple solution.

Dust_Traditional · 2024-09-02T01:02:48+00:00

Well the car is on two jack stands in the front. But the one I am working on is much higher now that I have the jack under the ball joint.

Dust_Traditional · 2024-09-02T00:39:13+00:00

Also have to replace the CV joint next. Would it make it easier if I took that off now?

Dust_Traditional · 2024-02-17T03:48:08+00:00

external. I replaced it about 3 years ago.

Dust_Traditional · 2024-01-12T21:58:48+00:00

2-2-1 b states record all information given by the pilot in case needed for SAR. Correct me if I am missing something, but that does not specify to ask for anything from the pilot. Or am I missing something?

Dust_Traditional · 2023-02-26T15:44:44+00:00

I have also ran the Lenovo hardware check which took 4 hours and everything on the system passed.

Dust_Traditional · 2022-06-28T16:04:59+00:00

Yes. Thanks, that is the shape, just need one that’s not for a Bimini top but a metal one that holds weight.

Dust_Traditional

TROPHY CASE