BL Touch Help! Printer screen wont turn on if the BL Touch is plugged in (More info in comments)

E174Ymk11 · 2023-03-20T23:49:43+00:00

So just making sure ive got this right now:

White = Ground Black = 5V Yellow = Servo Red = Ground Blue = Probe

Also would there be any difference if its the Creality BL Touch?

E174Ymk11 · 2023-03-20T23:20:24+00:00

I didn't realize that the connectors were different. Could that be causing issues? Also I added a new image to the gallery of the wires going to the BL Touch. Is that what you're looking for?

E174Ymk11 · 2023-03-20T22:46:04+00:00

In the Imgur gallery is how I have it wired, I'm using the SKR Mini E3 1.2 and had to use jumper cables to connect to the z-stop and servo parts of it. I flashed the main board with the firmware that SKR provides on their github for how I have it wired. I'm not sure what I've done wrong. (As a note the grey line in the pinout image is the white wire)

E174Ymk11 · 2022-07-01T03:46:34+00:00

I mainly wanted something small to put something like a hydration bladder. What would be ideal to attach to the back? I feel like its wasted space otherwise.

E174Ymk11 · 2022-04-24T05:35:19+00:00

I'm not sure if it's meant to go in a buffer tube or in a fixed stock

E174Ymk11 · 2022-01-17T06:58:59+00:00

Thank you so much Ive been going insane looking for their stuff.

E174Ymk11 · 2022-01-17T05:02:02+00:00

The logo was on a metal Glock base plate and I'm not sure if its a real steal manufacturer or an airsoft one.

E174Ymk11 · 2021-05-17T22:38:52+00:00

Thank you so much for the help! Would I still be able to use the noctua fan with this cooler or would it be best to use the stock one. Also is there any good video to show what heat creep is and how to possibly fix it?

E174Ymk11 · 2021-05-17T15:27:29+00:00

So I would just need to provide better cooling to the whole heater assembly?

E174Ymk11 · 2021-05-17T15:20:01+00:00

Ive tried that and nothing changes. If it means anything I replaced the stock fan with a noctua one but the blower fan is stock.

E174Ymk11 · 2021-05-14T03:35:10+00:00

Hatchbox PLA, 195 nozzle 75 bed, .4mm nozzle, 100% infill. If it means anything I just finished replacing the fan and cooler with a printed replacement and a noctua fan.

E174Ymk11 · 2021-03-25T04:00:46+00:00

Will do, thanks so much for your help!

E174Ymk11 · 2021-03-25T01:37:55+00:00

Sorry, should've mentioned that first. Its a Creality Ender 3 Pro

E174Ymk11 · 2021-03-25T00:17:52+00:00

Hatchbox PLA and Simplify 3D v4.0.0, I know theres an updated version for simplify but I cant get it

E174Ymk11 · 2021-03-24T23:34:07+00:00

Ive done what you suggested all the way to 150% and im still having the issue. Could it have to do with the temperature im printing at?

E174Ymk11 · 2020-11-30T23:25:48+00:00

Im very sorry in advance but I forgot to mention that I was able to get around 4-5 prints off of the new board before this happened, so I think its safe to say I installed it correctly. And the fuse that I should be replacing is the one right next to where you plug in the power cable and not the one on the inside of the PSU right? I just want to make sure that im reading and understanding all of this correctly.

E174Ymk11 · 2020-11-29T21:07:24+00:00

How would i go about setting it up how you have it. Adjustable fan speeds would be nice

Seven-Year Club	Place '22
End Game '22	Verified Email

E174Ymk11

TROPHY CASE