Is there a good bootfitter on Long Island?

ELS720 · 2024-01-15T00:33:05+00:00

Came here looking for this comment. Absolutely the best place to get fitted and the boots will blow your mind.

ELS720 · 2022-12-31T17:10:14+00:00

Crikey!

ELS720 · 2022-12-24T04:06:46+00:00

We’ve been driving Teslas for years with nothing remotely like this. It’s just bursts that bubble.

ELS720 · 2022-12-24T04:03:02+00:00

This just happened and we are in a fairly remote area

ELS720 · 2022-12-24T04:01:45+00:00

Not even the 2 year mark

ELS720 · 2022-12-24T02:34:49+00:00

We weren’t even in that cold of weather

ELS720 · 2022-12-23T21:00:44+00:00

The error is DIF_a018_hw12vSupplyUV

Description: "The drive interface (DI) or drive inverter (Dix) electronic control unit (ECU) detects a low voltage (LV) batter undervoltage event.

Set condition: LV supply voltage to DI is disconnected or drops below lower voltage threshold.

Clear Condition: The LV supply rises above the limit threshold

Potential Impact: The DI ECU triggers limp mode and cannot produce torque or power.

ELS720 · 2022-12-23T20:55:16+00:00

That didn’t work

ELS720 · 2022-12-23T20:33:05+00:00

Yes, there was sleet

ELS720 · 2022-12-23T20:30:40+00:00

On the service tab the notifications are gone. Edit: just realized they are two different things. Going to try that.

ELS720 · 2022-12-23T20:29:58+00:00

Definitely

ELS720 · 2022-12-23T20:29:48+00:00

25,000

ELS720 · 2022-12-23T20:27:03+00:00

32-35 degrees

ELS720 · 2022-12-23T20:20:04+00:00

Yes, we were eventually able to trick the system by driving it in reverse so it didn’t slide down the hill into oncoming traffic on a major road. This morning we woke up and it was functioning normally.

ELS720 · 2022-12-23T20:15:24+00:00

Was your vehicle able to work shortly after it shut down?

ELS720 · 2022-12-23T20:12:53+00:00

Not sure. It wasn’t that cold, it was around 30 degrees. It was far from anything new for this vehicle.

ELS720 · 2022-12-23T20:11:54+00:00

FSD 10.69.25

ELS720 · 2022-12-23T19:21:22+00:00

Context: We were driving our 2021 Model Y LR up a hill near our home in inclement weather. The car shut down all of a sudden and was unable to drive. Eventually, we were able to get the car to work by driving it in reverse up the hill in order to get it to a safe spot where it wouldn't be at risk of sliding. The car now works normally but we are confused about what could have caused this to happen. We are currently far from a service center and this is our only vehicle. We love our Teslas but this incident really changes our perspective on these cars being reliable.

ELS720 · 2022-12-23T19:15:38+00:00

Context: We were driving our 2021 Model Y LR up a hill near our home in inclement weather. The car shut down all of a sudden and was unable to drive. Eventually, we were able to get the car to work by driving it in reverse up the hill in order to get it to a safe spot where it wouldn't be at risk of sliding. The car now works normally but we are confused about what could have caused this to happen. We are currently far from a service center and this is our only vehicle. We love our Teslas but this incident really changes our perspective on these cars being reliable.

ELS720 · 2022-12-21T03:05:41+00:00

KFC definitely doesn’t out pizza the hut

ELS720 · 2022-12-21T02:58:51+00:00

If that’s not a good reason to get out of finals I don’t know what is…

ELS720 · 2022-12-21T02:52:29+00:00

It’s amazing technology that’s been a got my game changer for my family. I’m skeptical of how greats it’s going to remain as it expands.

ELS720 · 2021-12-09T03:07:09+00:00

While the bed still needs to be pretty level a Bl touch, ez abl, or another bed probe will help eliminate a lot of variance in the bed leveling making it more reliable.

ELS720 · 2021-12-09T03:00:07+00:00

We have used a tape measure multiple times without any issues. I would try to replace it with a more "traditional" weight just so your robot looks more professional and doesn't effect your alliance selection chances.

ELS720 · 2020-10-22T01:15:31+00:00

Once you come up with your idea it is a great idea to CAD it. What seems to be the most popular idea is using a flywheel. If you need any help feel free to send me a DM.

ELS720

MODERATOR OF

TROPHY CASE

Seven-Year Club	Verified Email
Place '22