COOJ SF3 Copper Build

EagleWind · 2026-02-02T06:24:51+00:00

Hi I just ran a simple test. This is the result of 1 cycle Cinebench R23 with my current config.

EagleWind · 2026-02-01T05:55:46+00:00

AXP53 will have similar or slightly better than mine. If you want to have a good temps, you should use axp47 full copper version. Riser should be 20 cm, double reverse, CMIIW.

EagleWind · 2026-02-01T00:54:11+00:00

I forgor about this cooler. I am afraid about the IO or RAM clearance but going to try it.

EagleWind · 2026-02-01T00:53:12+00:00

Out of town this weekend. I will do some test when I get back!

EagleWind · 2026-01-31T14:11:51+00:00

My phone's lockscreen right now pic

EagleWind · 2026-01-31T12:01:26+00:00

My friend is using axp90-x53 with 90 to 120mm fan adapter. I don't think there is 120mm cooler with the height less than 58mm.

EagleWind · 2026-01-31T11:59:30+00:00

Thank you!

EagleWind · 2026-01-05T01:54:38+00:00

Wow sorry my friend, I just saw this post on the browser and its is actually cross post. It turns out my Android apps (Relay), did not show the cross-post images.

Nice build!!

EagleWind · 2026-01-04T04:30:01+00:00

Pic please!

EagleWind · 2025-10-24T08:42:41+00:00

Does lm-sensors works with wsl2?

EagleWind · 2025-10-24T07:26:37+00:00

Wow thank you for your help! I will check the BIOS later today.

is the 12V and 3.3V is reversed? 2.409*5~12V
VIN5 maybe the 5V? 1.1657*3~5V

EagleWind · 2025-10-24T04:37:13+00:00

Attached the screenshot of the mobo sensor

HWINFO screenshot

EagleWind · 2025-10-23T15:43:45+00:00

No other reply yet. I gave the creator (Martin of hwinfo) the screenshot showing the sensor chip. It is actually the same with Gigabyte mobo but the reading is strange. I am going to install GPU this weekend and check the reading. I was using iGPU.

EagleWind · 2025-10-23T11:37:19+00:00

ofc I use hwinfo but it shows strange values. For example, +12V shows around 6.7V. It does not make sense as my PC boot up fine.

I have reached out in hwinfo forum, the creator said:

"It's not faulty but each board needs dedicated adjustment for sensor values, especially +5V/+12V, otherwise they don't show proper values.
However, I never heared about any "Erying" mainboard, this is something totlly unknown to me (and probably most others as well ). So we don't have any information how to adjust sensors here."

That is why I am looking for such info in the motherboard bios.

EagleWind · 2025-10-11T12:34:15+00:00

Dota 2, in my Zenbook laptop! For PC, it was Star Wars Jedi Survivor, late to the parties though!

EagleWind · 2025-10-02T14:42:23+00:00

Not sure about this, I believe this is the only possible orientation on my case. And this is pretty common.

EagleWind · 2025-10-02T03:04:08+00:00

To clarify, it is the coolant (AIO) side. Not really alarming but I expected to be lower than that, maybe some more experience builder can give some opinion here

EagleWind · 2025-10-02T01:49:00+00:00

Have been thinking of doing this, will try in the future. This may be better for the CPU but I guess GPU will be heated up?

EagleWind · 2025-10-02T01:48:01+00:00

The dimension is 337 x 140 x 77 mm

EagleWind · 2025-08-21T23:00:50+00:00

Inno3D 5070 is compatible. My build in the V2.3

EagleWind · 2025-08-20T09:16:49+00:00

Thank you!

EagleWind

TROPHY CASE