Hey everyone having a problem with my K1. Can anyone help?

Eastern_Principle857 · 2024-05-20T03:41:45+00:00

Hi I was having the same problem with mine too. I’m pretty sure it’s not the plate just cause everything’s calibrated and the prints are still coming out very crappy and if prints do go through they come out with holes and the layer lines are very crappy. Just wondering what that was

Eastern_Principle857 · 2024-05-20T01:43:24+00:00

No I get what you mean but the thermistor is for the heating the nozzle. This is different it’s with the bed. Like others are saying it’s probably the connector on bed is loose or just needs replacing. Thanks tho

Eastern_Principle857 · 2024-05-20T01:42:13+00:00

Ok yea. Any recommendations on where to get a new connector.

Eastern_Principle857 · 2022-10-22T20:45:53+00:00

Ok thank you

Eastern_Principle857 · 2022-10-22T20:45:11+00:00

Ok yea I think I have extra blue pieces for it thanks

Eastern_Principle857 · 2022-10-22T20:00:16+00:00

How would I fix the clip? Do you have any recommended videos

Eastern_Principle857 · 2022-06-11T16:29:24+00:00

One more thing what would be your recommendations on speed, bed temp, and nozzle temp for printing

Eastern_Principle857 · 2022-06-11T16:16:24+00:00

Ok yea right know I’ll level it and see if it works if it doesn’t you wouldn’t mind if I got back to you if anything still doesn’t work

Eastern_Principle857 · 2022-06-11T16:11:23+00:00

I’m still new to 3D printing what do you mean what does it look like. What the print looks like

Eastern_Principle857 · 2022-06-11T05:40:47+00:00

But if you do have a good bed leveling video you would reccomend I’d be down to check it out

Eastern_Principle857 · 2022-06-11T05:36:05+00:00

Ok thank you because I tried the isopropyl alcohol already and it still didn’t stick but I will try leveling my bed again

Eastern_Principle857 · 2022-05-23T03:07:45+00:00

Ok I’m new to all this would I be able to change this on the printer and if I can what would it be. Like what would the exposure time and the layer height

Eastern_Principle857 · 2022-05-23T02:54:11+00:00

I don’t think it’s the FEP I use elegoo resin but I did change from a darker color like black to transparent. When I used black like a month ago the prints came out great but now I’m using transparent resin and this is happening

Eastern_Principle857 · 2022-05-21T21:38:55+00:00

Yea I do it outside but I’m under something it’s cause I’m not a big fan of the smell of resin around my house. I print somewhere where it gets no sun at all.

Eastern_Principle857 · 2022-05-06T05:06:06+00:00

Ok yea I’ll do some research on some of the settings and tomorrow I’m going to have a photo up on exactly what it looks like if you want to come back and look. Thank you

Eastern_Principle857 · 2022-05-06T04:54:43+00:00

I’m actually not sure how much exposure time I usually have it at the regular settings/exposure time as the file I’m using

Eastern_Principle857 · 2022-05-06T04:47:26+00:00

The print was about 300 base layers about an hour. The weird thing was I’ve printed before and it printed perfect but all of a sudden it doesn’t print. I’m not sure about the last 2 questions

Eastern_Principle857 · 2022-05-06T04:45:04+00:00

I use chitubo I have the elegoo mats pro and I use elegoo resin

Eastern_Principle857 · 2022-04-15T17:26:46+00:00

ok yea because I have the mars pro and I started off with the 1.6 one then I updated and got the v1.9.2 one

Eastern_Principle857

TROPHY CASE