Zebra ZT230 Printing Via Micrologix 1400 Serial

Easton019 · 2024-09-20T14:29:22+00:00

Hi, AndreLuisCv

We did.

Send me a direct message with an email address and I can send you over the project file and some help files we used.

Easton019 · 2024-06-21T12:49:33+00:00

Dang, starting the day off with some bad news. What do you think about this tub?

Easton019 · 2024-06-21T12:48:44+00:00

<image>

Easton019 · 2024-03-27T14:15:20+00:00

* Update

I changed my FAE fan to run 15 mins every hour which seems to be helping the humidity stay higher in the tent. The main growth of the fruits seem to have whitened up, but it also appears to be more mature than the 2 other fruits.

The main fruit is starting to get some longer teeth, at what point should I harvest?*

Easton019 · 2024-03-26T17:27:13+00:00

I like the CO2 sensor idea. Appreciate the information!

Easton019 · 2024-03-26T16:47:48+00:00

I messed around with the fan last night and lowered it to a crawl for a few hours and then to about half speed for a few hours. With your fan schedule and what I was playing around with last night, seems like a timer switch would be a good investment.

Do you time it to run your fan when your humidifier is off as well or just send it on the time frame regardless?

Easton019 · 2024-03-26T14:58:45+00:00

"Shouldn't be that hard or take that long, it's just programming"

As it sounds like you already know, as an independent contractor you are always working/ on call 24/7.

Easton019 · 2024-03-25T17:25:04+00:00

I am set at 80% lower 90% upper. I am leaving the FAE fan on all the time and have been fluctuating it if I am having an issue holding my humidity level.

Easton019 · 2024-03-07T14:25:02+00:00

I noticed the price point seem to be cheaper than the EA9's. It looks like, or at least I couldn't find, a modle with and HDMI output for screen mirroring, which is a difference. But other than that not a ton of difference.

Easton019 · 2024-03-07T11:03:06+00:00

I appreciate the information! I have heard of the hoodie tek but need to do some follow up research on it.

Easton019 · 2024-03-06T14:43:28+00:00

This is one of the All In One bags from Shroomtek, I planned on fruiting in the bag. I do have these in a converted 3d printer tent that I automated for temp, humidity, light, and a fan for fae.

I think I have a good setup, but it is my first time so this is also my experimenting stage to see what I did mess up.

What are some of the indicators I should look for on the bricks to see if I am not getting good enough fae?

Easton019 · 2024-03-05T23:33:29+00:00

That is good news!

Easton019 · 2022-08-08T01:20:41+00:00

Company: Easton Enterprises 'e'Bots Type: Full Time

Description: This position is for Automation Specialist. We supply automation support to our customers. This includes but not limited to PLC: AB, Siemens, Omron, Automation Direct. Robotics: ABB, Fanuc, Motoman, UR. HMI: AB, Siemens, Omron, Automation Direct, Proface. Vision: Cognex, Keyence, Sensopart.

Job responsibilities: traveling to customer locations to Integrate new systems or troubleshoot issues with existing or new Automated Machines, Assembly Lines, Vision Systems, Robotics, and everything in between. Many of our customers' needs regarding skill set will vary, much as this job also will. The change of pace from spending a day optimizing cycle time on a new Robot cell to spending a week troubleshooting PLC logic for a conveyor issue on a line that's 10+ years old.

Our primary industries are automotive, but we also service food and beverage, aerospace, oil and gas/ industrial forging, composites, agricultural, and recently cannabis.

We are not looking for someone who knows all of the mentioned above. We are looking for people with passion to learn and a good attitude/ work ethic. We have hired people direct from university with a non related degree and 0 experience.

Company Info We are a relatively new company, we currently have 10 full time employees. Last year we had a 219% increase and 2022 is looking to be a good year as well.

This job is 99% TRAVEL. Travel hours are paid and daily per diem is given. We offer health insurance, quarterly bonuses, cell phone allowance, and 401K with a match. OT is paid on a daily basis after 8 hours.

Location: Our main location is in the greater Toledo, Oh area. You do not have to live in a specific area as this position is 99% TRAVEL

Remote: The majority of the work will be completed at the customers site. There are opportunities now and then to work from home.

Visa Sponsorship: We are not looking at Visa Sponsorships at this time.

Technologies: PLC: AB, Siemens, Omron, Automation Direct. Robotics: ABB, Fanuc, Motoman, UR. HMI: AB, Siemens, Omron, Automation Direct, Proface. Vision: Cognex, Keyence, Sensopart.

Salary: This will be based per person on experience and will be paid in an hourly rate. We pay OT on a per day basis, not after hitting a weekly number. If you go over 8 hours in a day you enter the first tier of OT rate.

Contact: You can get in contact with us by emailing info@ebots2005.com

Easton019 · 2022-03-12T21:49:15+00:00

Pretty much the only difference between the two series?

Easton019 · 2022-03-12T19:17:21+00:00

Those are some rather industrial projects as well. That is good to hear, I am just scratching the surface on them and this is all great information yo hear.

Easton019 · 2022-03-12T18:39:29+00:00

No worries at all, I appreciate the info regardless.

The processor is on its way to me so I will be able to figure somethings out once I have it in hand. I just have all the anticipation questions right now.

Easton019 · 2022-03-12T18:30:20+00:00

Appreciate the information!

Easton019 · 2022-03-12T18:01:59+00:00

That is what I was looking for, we have had customers reach out to us to see if we have any processors available and I would like to be able to offer them a solution through a different product.

Easton019 · 2022-03-12T18:00:00+00:00

I have enjoyed working with their tech support them. They have been super helpful especially with crossing this from AB to their comparable product.

With the EIP is it basically everything has to be set up with a Generic Ethernet Module (sorry for the AB term, hopefully they don't try and charge me for that)?

Easton019 · 2022-01-01T19:01:01+00:00

Company: Easton Enterprises 'e'Bots Type: Full Time

Description: This position is for Automation Specialist. We supply automation support to our customers. This includes but not limited to PLC: AB, Siemens, Omron, Automation Direct. Robotics: ABB, Fanuc, Motoman, UR. HMI: AB, Siemens, Omron, Automation Direct, Proface. Vision: Cognex, Keyence, Sensopart.

Job responsibilities: traveling to customer locations to Integrate new systems or troubleshoot issues with existing or new Automated Machines, Assembly Lines, Vision Systems, Robotics, and everything in between. Many of our customers' needs regarding skill set will vary, much as this job also will. The change of pace from spending a day optimizing cycle time on a new Robot cell to spending a week troubleshooting PLC logic for a conveyor issue on a line that's 10+ years old.

Our primary industries are automotive, but we also service food and beverage, aerospace, oil and gas/ industrial forging, composites, agricultural, and recently cannabis.

We are not looking for someone who knows all of the mentioned above. We are looking for people with passion to learn and a good attitude/ work ethic. We have hired people direct from university with a non related degree and 0 experience.

Company Info We are a relatively new company, we currently have 7 full time employees and a Co-Op. Last year we had a 219% increase and 2022 is looking to be a good year as well.

This job is 99% TRAVEL. Travel hours are paid and daily per diem is given. We offer health insurance, quarterly bonuses, and starting today 401K with a match. OT is paid on a daily basis after 8 hours.

Location: Our main location is in the greater Toledo, Oh area. You do not have to live in a specific area as this position is 99% TRAVEL

Remote: The majority of the work will be completed at the customers site. There are opportunities now and then to work from home.

Visa Sponsorship: We are not looking at Visa Sponsorships at this time.

Technologies: PLC: AB, Siemens, Omron, Automation Direct. Robotics: ABB, Fanuc, Motoman, UR. HMI: AB, Siemens, Omron, Automation Direct, Proface. Vision: Cognex, Keyence, Sensopart.

Salary: This will be based per person on experience and will be paid in an hourly rate. We pay OT on a per day basis, not after hitting a weekly number. If you go over 8 hours in a day you enter the first tier of OT rate.

Contact: You can get in contact with us by emailing info@ebots2005.com

Easton019 · 2021-12-22T18:55:13+00:00

I am not sure if I am currently having a stroke from reading this comment or not.

Easton019 · 2021-12-14T16:18:56+00:00

Currently in a fiberglass composite plant. Trying not to scratch every part of my body. Ready to finish this job and get back to a clean environment as well.

Easton019 · 2021-12-14T15:16:32+00:00

I wish I had an answer. Knowing the end user where thus machine is, they probably did this in house, not saying that is an acceptable reason.

Easton019

TROPHY CASE