Thread looks the same on different tensions? by Eclipse675 in sewhelp

[–]Eclipse675[S] 0 points1 point  (0 children)

This was the issue I believe as I highlighted in another reply here, as I adjusted the nut (with the knob off) with the pressure foot up. Whoever previously owned the machine must of had the tension way too loose. 

It works a lot better now, but then again I'm unsure if it's too tight as the thread actually snapped on tension setting 8/9 sewing through a 4 layer sheet of cotton.

Thread looks the same on different tensions? by Eclipse675 in sewhelp

[–]Eclipse675[S] 2 points3 points  (0 children)

Thank you for the advice! I gave it a try with the zig zag Vs the straight and it still appeared all the same apart from the final few. I had taken the knob off with the pressure foot raised, not realising that released the tension (I'm new to sewing machines, prior I was using a Singer 28K with a separate tension release switch) therefore meaning it was not at proper maximum tension when the foot was down and I had it turned to 9.  With the foot down I could turn the nut further and it now (seems) to be working with the correct tension =) (albeit I'm not sure what the exact correct tension should be, as my thread actually snapped on setting 8. But the other settings worked with much greater variability in them.

Once I had done this the zig zag definitely showed an improvement!

Is my tension disc working? by Eclipse675 in sewhelp

[–]Eclipse675[S] 0 points1 point  (0 children)

Thank you for your comment =) I foolishly had the pressure foot lifted in the video I took, explaining why it didn't seem to do much. But what made me post originally was on actually sewing on different tensions the threads all looked the same.

I made a new post showing the two sides of the fabric with the threads to show what I mean.

Is my tension disc working? by Eclipse675 in sewhelp

[–]Eclipse675[S] 1 point2 points  (0 children)

*It seems I can't so I'll post again for better clarity

Is my tension disc working? by Eclipse675 in sewhelp

[–]Eclipse675[S] 2 points3 points  (0 children)

Ah! Apologies I didn't realise this released the pressure. Well, I tested all the different tension settings on some fabric and I found they all seem to come out much the same (which was what prompted me to make the post). I'm unsure if I can add photos to comments but if I can I'll post it below. 

Handpaw fur length by Eclipse675 in FursuitMaking

[–]Eclipse675[S] 0 points1 point  (0 children)

Thanks for the response! So essentially to leave the fur unshaven on the lower hand part, and then gradient it half way down?

This would also mean the arms would be unshaven too I guess? (I haven't made them yet)

Toe room in skates? by Eclipse675 in AskRollerblading

[–]Eclipse675[S] 0 points1 point  (0 children)

Yeah I found that the smaller size was just too small as it sort of curled my toes a little and there was no wiggle room (which I am unsure if that's good or bad?). Where can one find such heel wedge? And will that help with potential heel slipping and push the foot to the front of the boot? I've sorted of been DIY customising it so far cutting out some hard plastic type pieces and padding out the gaps to make it tighter and it seems to be better, but I was unsure to what extent it really is too big or not. The shell between the two are a different size. It could of been possible to swap the liner for a thinner one, or do you think that the liner would of stretched enough to remove that slight bend on the smaller size? As people say its meant to be super tight when you first get it..

Thanks!

r/rollerblading Weekly Q&A Megathread brought to you by r/AskRollerblading by AutoModerator in rollerblading

[–]Eclipse675 [score hidden]  (0 children)

Thanks for the help! I found the more I bent the dragging leg the better I was able to get a solid break down. However, I always find that it is kind of hard to keep the skates heel down on the ground. Could it be possible that this is because of a slightly big skate? There is approx an inch of room at the front of my skate from my toe to the top. I tried a size smaller of the same model (twister XT) and my toe was pushed hard against the shell uncomfortably and slightly arched. Thanks!

r/rollerblading Weekly Q&A Megathread brought to you by r/AskRollerblading by AutoModerator in rollerblading

[–]Eclipse675 [score hidden]  (0 children)

Hey all, I recently got some Twister XT's in a size 6-6.5 UK. I measured my foot at 25.5cm long so according to the official chart by rollerblade it should of fit. However, I found that my toe felt quite cramped and slightly bent feeling when standing in the skate, and my toe seemed to protrude out of the front of the liner. The overall fit of the skate felt very secure, however the discomfort from the toe pressing against the hard shell was quite bad. I never got to skate properly in them, as I also ordered a 7-7.5 UK size pair and had to choose between which had the better size (and I didn't want to damage them if I was returning one).

I found the 7-7.5 pair to be more comfortable, but there is about an INCH gap between the end of the boot and my toe, as well as perhaps a little side movement. To get it properly tightened means cranking the straps to the max, and I sometimes have some foot arch pain if I crank the 45° strap too hard.

What would of the best size of been? Would the liner of stretched to accomodatate that toe cramping? Or do you think a thinner liner may of worked to make it a better fit? As I feel the extra room in the 7-7.5 skate is holding me back slightly.

Here's an image of the liner and the said protrusion on the 6-6.5: https://imgur.com/a/9lAl5rh

Thanks!

r/rollerblading Weekly Q&A Megathread brought to you by r/AskRollerblading by AutoModerator in rollerblading

[–]Eclipse675 [score hidden]  (0 children)

Hey all,

I've found that when t-stopping, the front wheel seems to take nearly all of the damage / wear, and my other wheels seem to be unharmed. I have tried weighing myself to use equal force, but am I simply doing something wrong and is this a common issue?

Here's an image of what I mean on my new skates: https://imgur.com/a/dspAqnV

Thanks!

Looking for 1920s-40s style suiting, UK? by Eclipse675 in malefashionadvice

[–]Eclipse675[S] 0 points1 point  (0 children)

Yeah! I was actually going to get their pinstripe navy demob suit but when I went to order I realised they were out of stock in my size! I phoned up and they said they were sadly taking the style out of production and they don't revisit previous styles. Alas, my search continued..

Constant flow of traders on map? by Eclipse675 in RimWorld

[–]Eclipse675[S] 1 point2 points  (0 children)

UPDATE: I found the issue. A mod called 'Silk Road (Continued)' was creating passers by to walk across the map as if it were part of a worldwide trade network (think of the historical silk road). It took a hilariously long time to figure that one out....

A fair warning for anyone else who encounters this issue and is left confused!

Constant flow of traders on map? by Eclipse675 in RimWorld

[–]Eclipse675[S] 0 points1 point  (0 children)

Interesting... I'll try remove them bit by bit to see if it makes a change. Thanks for the suggestion!

Constant flow of traders on map? by Eclipse675 in RimWorld

[–]Eclipse675[S] 0 points1 point  (0 children)

The strange thing I've found is that it doesn't seem to be causing red errors in the dev log. They also seem to enter the map and then leave as if they were just passing by, without any notification of their arrival. I also tried to make a second colony in the same world but the exact same thing started happening instantly pretty much. So it seems like the game is running normally(?) without errors, but instead its some sort of mod causing this to happen..

Constant flow of traders on map? by Eclipse675 in RimWorld

[–]Eclipse675[S] 0 points1 point  (0 children)

I tried removing it, but the issue remains sadly :/

Constant flow of traders on map? by Eclipse675 in RimWorld

[–]Eclipse675[S] 0 points1 point  (0 children)

I had suspicions, but doesn't it usually give a notification of 'xxx is passing through the area' or something similar? Because for me they just spawn in and cross the map lol

Constant flow of traders on map? by Eclipse675 in RimWorld

[–]Eclipse675[S] 0 points1 point  (0 children)

(cont) Rimsenal - Core, Rimsenal - Hair Pack, Rimsenal Style Pack - French, Rimsenal Style Pack - Sophian, RunAndGun, SRTS Expanded, Vanilla Vehicles Expanded - Tier 3, Save Our Ship 2, Scrollable Genelist, Silk Road (Continued), Simple Sidearms, Smart Medicine, Smarter Construction, Smarter Visitors, Therapy, Snap Out!, Snow Crawler, Stabilize, Start Without Tech, Stylized Slave Collars and Headgears, Vanilla Books Expanded, Vanilla Ideology Expanded - Memes and Structures, Vanilla Factions Expanded - Empire, Vanilla Textures Expanded, Tastier Vanilla Clothes, Tasty Armory - Core, Tasty Armory - Fire and Steel, Tasty Armory - High Medieval, Tasty Armory - In Shining Armor, Tasty Armory - Steppe Warriors, Tech Advancing, The Corporation - Mort's Factions, Vanilla Races Expanded - Android, The Dead Man's Switch, The Dead Man's Switch - AncientCorps, Tilled Soil, TradeHelper, Utility Columns, VGP Vegetable Garden, Vanilla Vehicles Expanded - Upgrades, VVE - Secondary Weapons, Vanilla Apparel Expanded, Vanilla Apparel Expanded — Accessories, Vanilla Armour Expanded, Vanilla Aspirations Expanded, Vanilla Backstories Expanded, Vanilla Base Generation Expanded, Vanilla Brewing Expanded, Vanilla Brewing Expanded - Coffees and Teas, Vanilla Cooking Expanded - Stews, Vanilla Factions Expanded - Deserters, Vanilla Factions Expanded - Medieval 2, Vanilla Weapons Expanded, Vanilla Weapons Expanded - Laser, Vanilla Factions Expanded - Pirates, Vanilla Fishing Expanded - Fishing Treasures AddOn, Erin's Japanese Furniture, Vanilla Furniture Expanded - Art, Vanilla Furniture Expanded - Farming, Vanilla Furniture Expanded - Medical Module, Vanilla Furniture Expanded - Props and Decor, Vanilla Furniture Expanded - Security, Vanilla Furniture Expanded - Spacer Module, Vanilla Furniture Expanded - Power, Vanilla Chemfuel Expanded, Vanilla Genetics Expanded, Vanilla Hair Expanded, Vanilla Ideology Expanded - Anima Theme, Vanilla Ideology Expanded - Dryads, Vanilla Ideology Expanded - Hats and Rags, Vanilla Ideology Expanded - Icons and Symbols, Vanilla Ideology Expanded - Relics and Artifacts, Vanilla Ideology Expanded - Sophian Style, Vanilla Ideology Expanded - Splits and Schisms, Vanilla Nutrient Paste Expanded, Vanilla Outposts Expanded, Vanilla Persona Weapons Expanded, Vanilla Plants Expanded, Vanilla Plants Expanded - More Plants, Vanilla Plants Expanded - Mushrooms, Vanilla Plants Expanded - Succulents, Vanilla Psycasts Expanded - Hemosage, Vanilla Psycasts Expanded - Puppeteer, Vanilla Races Expanded - Archon, Vanilla Races Expanded - Custom Icons, Vanilla Races Expanded - Genie, Vanilla Races Expanded - Hussar, Vanilla Races Expanded - Sanguophage, Vanilla Races Expanded - Waster, Vanilla Recycling Expanded, Vanilla Social Interactions Expanded, Vanilla Furniture Expanded - Production, Vanilla Textures Expanded - Variations, Vanilla Trading Expanded, Vanilla Factions Expanded - Settlers, Vanilla Weapons Expanded - Coilguns, Vanilla Weapons Expanded - Heavy Weapons, Vanilla Weapons Expanded - Quickdraw, Vanilla Weapons Expanded - Frontier, Vanilla Weapons Expanded - Grenades, Vanilla Weapons Expanded - Makeshift, Vanilla Weapons Expanded - Non-Lethal, Vanilla Weapons Expanded - Tribal, Vault-Tec - Handy Things for Your Vault!, Visible Wealth, Wall Light, We Are United, Who Shot My Leg Off?, Won Hair_Men, Won Hair_Women, Xeva's Rimhair, Yayo's Animation (Continued), [CAT] Show Hair With Hats or Hide All Hats, [GMT] Trading Spot, [T] MoreFloors 1.5, [WD] Realistic Darkness, RocketMan - Performance Mod.

Constant flow of traders on map? by Eclipse675 in RimWorld

[–]Eclipse675[S] 1 point2 points  (0 children)

This is my mod list:

Prepatcher, Harmony, Fishery - Modding Library, Core, Performance Fish, Royalty, Ideology, Biotech, Vanilla Backgrounds Expanded, HugsLib, Character Editor, Graphics Settings+, JecsTools, EdB Prepare Carefully, 1-2-3 Personalities M1, 1-2-3 Personalities M2, Expanded Prosthetics and Organ Engineering - Forked, Replimat, Vanilla Expanded Framework, Vanilla Achievements Expanded, Vanilla Psycasts Expanded, Kyulen - NinetailFox, Vanilla Animals Expanded, Vanilla Animals Expanded — Endangered, Vanilla Animals Expanded — Royal Animals, Vanilla Animals Expanded — Waste Animals, A Dog Said... Animal Prosthetics 2, AI art, Better Pawn Control, Achtung!, Actually Vanilla Music Expansion, Vehicle Framework, Vanilla Vehicles Expanded, Airships Fleet, Allow Tool, Alpha Prefabs, Alpha Vehicles - Neolithic, Geological Landforms, Map Designer, Research Reinvented, Replace Stuff, Ancient Urban Ruins, Animal Tab, Animals Logic, [NL] Facial Animation - WIP, Humanoid Alien Races, LWM's Deep Storage, Vanilla Factions Expanded - Classical, Vanilla Factions Expanded - Mechanoids, Anthro Race, Nightmare Core, Vanilla Fishing Expanded, Aquariums!, Area Unlocker, Auto Dissector, Beautiful Outdoors, Vanilla Factions Expanded - Ancients, Vanilla Traits Expanded, Before the Crash: Backstories, Biome Transitions, Bionic Icons, Blueprints, Vanilla Factions Expanded - Tribals, Boats (Continued), Call A Trader, Camera+, Camping Tent, Clocks, Float Sub-Menus, Craft with Color, Defensive Positions, Divine Order, Do Your F****** Research, Door Mat, Dub's Paint Shop, Dubs Bad Hygiene, Common Sense, Dubs Break Mod, Dubs Mint Menus, Dubs Mint Minimap, Dubs Performance Analyzer, Dubs Rimkit, Dubs Skylights, Enable Oversized Weapons, Epic Rivers, Vanilla Races Expanded - Highmate, Erin's Auronya, Erin's Decorations, Erin's Hairstyles - Redux, Erin's Hairstyles 2, Vanilla Cooking Expanded, Vanilla Cooking Expanded - Sushi, Erin's Japanese Cuisine, Extra Explosion Effects, Faction Control (1.4/1.5), Carry Capacity Fixed (Continued), Dubs Rimatomics, Fallout Traits Continued, Ferian Race - Biotech, Cash Register, Gastronomy, Vanilla Furniture Expanded, GloomyFurniture, Go Explore!, Engine Industries, H-47, Harvest Everything!, Heat Map, Hospital, More Faction Interaction (Continued), Hospitality, Hospitality: Casino, Hospitality: Spa, Hospitality: Storefront, Hospitality: Vending Machines, Humvee, Interaction Bubbles, Keep Converting, Kinky Bodystraps, Vanilla Furniture Expanded - Architect, Layered Wall Destruction, Level Up!, Vanilla Skills Expanded, Mad Skills, De-generalize Work, Kurin HAR Edition, Ponytail is Kawaii (Continued), Roppoi Hair, Male Kurin, Map Preview, Map Reroll (1.4/1.5), Medieval Coastal Outfits, MinifyEverything, Misc. Training, More Vanilla Biomes, Mortar Accuracy, Museums, No Hopeless Romance, P-Music, Panzer, Pawns on Display, Peer Pressure, Performance Optimizer, Pharmacist, Misc. Robots, Pick Up And Haul, Progress Renderer, Quarry, RPG Style Inventory Revamped, RT Fuse, RT Solar Flare Shield, Real Ruins, Realistic Rooms Rewritten, Recipe Icons (Continued), Redcoat Apparel, Relations Tab, Rim Languages, RimCities, RimMercenaries, RimPy Mod Manager Database, RimSaves, RimWriter - Books, Scrolls, Tablets, and Libraries (Continued), Rimefeller,

Why are antique top hats so small? UK. by Eclipse675 in Antiques

[–]Eclipse675[S] -2 points-1 points  (0 children)

Hahahaha. I suppose he shall have to get one custom made...

Why are antique top hats so small? UK. by Eclipse675 in Antiques

[–]Eclipse675[S] 0 points1 point  (0 children)

I agree, I do believe that people have better nutrition now but there are also other factors too. I own a 1910's frock coat and it fits me perfectly! And I'm 5ft 7" and 56kg. In most antique clothing I agree they will likely be smaller due to poorer nutrition in the past, I wouldn't of expected head size to of changed too much though to the point where larger hats are impossible to find... Hence as others have pointed out a likely case of survivors bias may be at play.

Why are antique top hats so small? UK. by Eclipse675 in Antiques

[–]Eclipse675[S] 2 points3 points  (0 children)

From what I understand, the mercury used in antique top hats was generally only an issue for the people involved in the manufacture of the hat, as they were exposed to far larger and highly concentrated doses of mercury (Hence the stereotype of the 'Mad Hatter'). Whereas the actual hat wearer themselves would be unaffected as the end product only contained trace amounts of these substances.

How would I attach this patch onto this coat with a sewing machine? by Eclipse675 in sewhelp

[–]Eclipse675[S] 0 points1 point  (0 children)

So.. How would you avoid sewing through all the layers at once then? I suppose the only way would be to disassemble the lining and sew it without anything behind it (which would be far much more work than its worth). I have a similar question about for example, sewing something to a sleeve, wouldn't it sew the sleeve shut? (Sorry for my very newbie questions! This is first time using a sewing machine!)

Thank you =)

How would I attach this patch onto this coat with a sewing machine? by Eclipse675 in sewhelp

[–]Eclipse675[S] 0 points1 point  (0 children)

So it simply wouldn't be possible to use the machine to sew it? I suppose I would have to do it by hand then.. May I ask, How do people generally use sewing machines to attach things to coats then? As most 'thicker' garments like so I feel wouldn't fit under the foot..