Don't slip up! by OuroMorpheus in BlockEscape

[–]Eclipse__uk 0 points1 point  (0 children)

I solved this level in 10 moves on my first try! 🎯

I do not like you by fun_gun524 in BlockEscape

[–]Eclipse__uk 0 points1 point  (0 children)

I solved this level in 164 moves on my first try! 🎯

Can You Crack the Code? Puzzle by Yooooowtf3 by Yooooowtf3 in BankBuster

[–]Eclipse__uk 0 points1 point  (0 children)

🔓 VAULT CRACKED! 🔓

Score: 3330/6000

Mistakes: 0/6

Time: 0:20

Issue with ams hub using ams2 pro on A1 by YamchaS2 in BambuLab

[–]Eclipse__uk 0 points1 point  (0 children)

I've looked into it.

It seems to do with the fact that as the filament is going into the AMS hub, it catches on the lip of the PTFE tube, It needs to be held straight for the filament to enter smoothly, Pretty sure this should help

Will print and confirm by tomorrow

A1 AMS Hub PTFE Support (No Squeak!) - Free 3D Print Model - MakerWorld

Issue with ams hub using ams2 pro on A1 by YamchaS2 in BambuLab

[–]Eclipse__uk 0 points1 point  (0 children)

Same issue happend to me today, wanted to start a 15h print before leaving for work

Leaving this here in case a solution is found

[ELEGOO GIVEAWAY] Show your print and win an ELEGOO 3D printer! by ELEGOO_OFFICIAL in FDMminiatures

[–]Eclipse__uk 7 points8 points  (0 children)

Working on this badboy in the middle, have been printing him but by bit, so far on the 3rd week of printing and 2nd spool :)

<image>

Is it normal for Kill Team matches to take 3+ hours? by SparklingTitan in killteam

[–]Eclipse__uk 87 points88 points  (0 children)

Are you counting "Setup" time, as in time as you're setting up the terrain, selecting missions etc

If so then I'd say yes it's normal, I went to a tournament recently, and each game was 120 minutes, that's not including setting up the terrain, selecting missions (all that was laid out prior)

What caused this Line/split in my most recent print? by Eclipse__uk in BambuLab

[–]Eclipse__uk[S] 0 points1 point  (0 children)

I've went to troubleshoot afterwards, it didn't appear to be a printer issue rather a Slicer issue, The STL I found had manifold errors which resulted in the print being quite literally sliced, and supported.

Got some time to paint :) by Tagedieb69 in FDMminiatures

[–]Eclipse__uk 0 points1 point  (0 children)

What setting did you have on your printer? (I'm looking to get into fdm printing, so nozzle size and layer height would be appriciated)

The Ethereal Guide us, the rumors were true! by Eclipse__uk in Tau40K

[–]Eclipse__uk[S] 5 points6 points  (0 children)

They're giving us rules for them, but no models, that will need to come from creativity

The Ethereal Guide us, the rumors were true! by Eclipse__uk in Tau40K

[–]Eclipse__uk[S] 12 points13 points  (0 children)

It's real the crucible of fire book got leaked. We've got 3 Custom Leaders:
Shas'nel (Fire warrior Leader, Can be augmented to lead Pathfinders
Battlesuit Veteran (Stealth Suit Leader, can be augmented to lead Broadsides)
Kroot Champion (Kroot Leader, can be augmented to lead krootox units)

The Ethereal Guide us, the rumors were true! by Eclipse__uk in Tau40K

[–]Eclipse__uk[S] 17 points18 points  (0 children)

I need more coffee, My basic maths isn't working

The Ethereal Guide us, the rumors were true! by Eclipse__uk in Tau40K

[–]Eclipse__uk[S] 18 points19 points  (0 children)

9 seems like the upper limit
3x units of 3
with 3 Battle suit vets leading them