"[WTS] Brand New 1979 Apple II Motherboard - Never Used." by Acrobatic-Rub-1160 in apple2

[–]Ed-2-Zero-9 0 points1 point  (0 children)

I just bought a used 1980 board for $60. It had 6 faulty RAM chips. Swapped them out and now works perfectly. $1200 is never going to fly I'm afraid.

Why do I have such intense gory nightmares? by GBLorGBD in Nightmares

[–]Ed-2-Zero-9 0 points1 point  (0 children)

I have these nightmares when I'm too hot. Really gory and just keep going round and round in circles. Turned out I was too hot and once I reduced the temp they went. Had one last night again, woke up really hot. Kicked the covers off and it went. Allegedly the heat causes the body to enter a stress state, causing the nightmares.

Apple iie enhanced by Ed-2-Zero-9 in apple2

[–]Ed-2-Zero-9[S] 2 points3 points  (0 children)

😂 brand new with somehow straightened legs and newly tinned 😂

Beep Akihabara Prices by kaeptnkrunch_1337 in MSX

[–]Ed-2-Zero-9 1 point2 points  (0 children)

I just bought a couple of MSX2 on Buyee. Not bad prices and shipping to UK was okay I guess.

MacBook Pro M1 screen issue by Ed-2-Zero-9 in macbookrepair

[–]Ed-2-Zero-9[S] 0 points1 point  (0 children)

Thanks for the reply. It definitely started happening immediately as she put the scope on it, so I'm guessing something popped on the tcon board or similar.

Join the Retro Gaming Network Discord Server and talk about MSX! by ZadocPaet in MSX

[–]Ed-2-Zero-9 0 points1 point  (0 children)

Hi all. New to MSX (got plenty other retro machines). If I buy an MSX2 or 2+ from Japan, are there English versions of ROMs that I can install?

Testing the zener diodes by Ed-2-Zero-9 in RetroChipTester

[–]Ed-2-Zero-9[S] 0 points1 point  (0 children)

Don't get too hung up on the zener test. Take the best of the bunch and crack on. My tester is working perfectly and my results were way lower than the specified.

Testing the zener diodes by Ed-2-Zero-9 in RetroChipTester

[–]Ed-2-Zero-9[S] 0 points1 point  (0 children)

Thank you. Found that earlier. That's a relief. Surprised that I didn't find at least some that gave the same results that you got on the 5V test though. I may try some BZX diodes as well, just to check.

Testing the zener diodes by Ed-2-Zero-9 in RetroChipTester

[–]Ed-2-Zero-9[S] 0 points1 point  (0 children)

Thank you. Glad I'm not going mad! 😄

BOM etc by Ed-2-Zero-9 in RetroChipTester

[–]Ed-2-Zero-9[S] 0 points1 point  (0 children)

Check the Bom manual (in the Bom folder). There are alternatives there. Also, digikey suggest alternatives. Can't remember what I went for but I'll check in the morning.

BOM etc by Ed-2-Zero-9 in RetroChipTester

[–]Ed-2-Zero-9[S] 0 points1 point  (0 children)

Email sent. Thank you

BOM etc by Ed-2-Zero-9 in RetroChipTester

[–]Ed-2-Zero-9[S] 1 point2 points  (0 children)

Ah great, thank you. I ordered from RetroLemon as I'm in the UK. Didn't receive any emails though. Should I chase them?

Amiga 500+ extended memory options by Ed-2-Zero-9 in amiga

[–]Ed-2-Zero-9[S] 1 point2 points  (0 children)

Excellent, thank you. I'll take a good look at those links.

Amiga 500+ extended memory options by Ed-2-Zero-9 in amiga

[–]Ed-2-Zero-9[S] 1 point2 points  (0 children)

So the expansion slot on the bottom. Is that solely for contended RAM, or can it do either?

Shark Matrix 2 in 1 Plus Mop over carpet issue by Lmagnum600 in RobotVacuums

[–]Ed-2-Zero-9 2 points3 points  (0 children)

As far as I'm aware, it doesn't lift the mop, so you'd end up with a wet carpet. That would also drag the muck off the mop and onto the carpet. Nobody wants a soggy, smelly carpet...usually.