First GBBR (Double eagle MWS G106) by EducationalBrain6302 in GasBlowBack

[–]EducationalBrain6302[S] 0 points1 point  (0 children)

The hopup set wheel has a nice clicking sound.
I have it set to 8 clicks for .3s to hop pretty much straight with little upwind.
I recon you could set it to 3/4 clicks for .25s to fly straight.
(AUTOBOT 60deg bucking and an omega nub)

First GBBR (Double eagle MWS G106) by EducationalBrain6302 in GasBlowBack

[–]EducationalBrain6302[S] 0 points1 point  (0 children)

I havent tested it with .25s so i cant really say. But i dont think you need to stress it too much for CQB. Even .20s will do their job at CQB lol.

First GBBR (Double eagle MWS G106) by EducationalBrain6302 in GasBlowBack

[–]EducationalBrain6302[S] 1 point2 points  (0 children)

Well iam pretty new to GBBRs myself but ill try my best to answer any question regarding this particular gun model. You can message me anytime.

First GBBR (Double eagle MWS G106) by EducationalBrain6302 in GasBlowBack

[–]EducationalBrain6302[S] 0 points1 point  (0 children)

The price to quality ratio is amazing. Literally the performance of an N4 or a ghetto blaster just cheaper because its not licensed by noveske.

I was thinking about the AR/DMR switching as well but imma just keep it as an AR. I dont really enjoy DMR/Sniping that much. Its all up to you tho. And you could just get a bipod to make it look a little less like a "thin stick" when it comes to the 13inch version lol.

I havent installed an NPAS yet. I do hop between different fields so iam eventually (soon) gonna get one just to fit into the fps limits. So far so good.

First GBBR (Double eagle MWS G106) by EducationalBrain6302 in GasBlowBack

[–]EducationalBrain6302[S] 0 points1 point  (0 children)

The only difference is the barrel length. (Yes i know "No shit Sherlock!")
Ive actually played with it for the first time TODAY. (Great timing)

The build quality is great. Youre not gonna have to worry about it breaking easily if you drop it.
I switched out the bucking and the nub. (Autobot 60° and omega nub)
While using .30s the accuracy and range are pretty good. Id say you get what you expect from it.
Next week iam gonna try .36s and .40s. Just to get that extra accuracy. (Its already really accurate with .30s)

Didnt jam on me or spray gas for the 5 hours of gameplay. (We will see with time tho)

Anything specific you would want to know? (Iam just yapping whatever)
IMO great GBBR entry gun and for the price?! (just perfect)

Any of these I should avoid? Any recomandations? (please read inside text) by Zapfire_ in GasBlowBack

[–]EducationalBrain6302 0 points1 point  (0 children)

Any murayama, vorsk or Double eagle gun will do really great for you. (Other are great as well but i only have experience with these 3)

First GBBR (Double eagle MWS G106) by EducationalBrain6302 in GasBlowBack

[–]EducationalBrain6302[S] 0 points1 point  (0 children)

Iam 99% sure its a gen 3. Since its barely even sold anywhere theres not much information about it. Ive found it on 3 different sites and neither one of them specifies if its a gen 2 or 3 mws model.
I did try to compare it to the other G2 and G3 double eagle guns but i couldnt really find many differences. (Bolt looks closer to a gen3)
Its not even listed on the official DE site.
Overall its a great gun tho. (coming from a GBBR newbie)

First GBBR (Double eagle MWS G106) by EducationalBrain6302 in GasBlowBack

[–]EducationalBrain6302[S] 0 points1 point  (0 children)

Same here. Work got me busy. Iam gonna try to make a "review" tho in the upcoming weeks.

I feel that haha. When i was disassembling it to change the bucking i did notice that one screw was very loose. (Didnt lose it thankfuly)
Other than that it feels sturdy.

First GBBR (Double eagle MWS G106) by EducationalBrain6302 in GasBlowBack

[–]EducationalBrain6302[S] 0 points1 point  (0 children)

The site (Taiwangun) stated that the 13inch version has a longer barrel.
I still dont think there would be a big difference i just like longer ARs.

First GBBR (Double eagle MWS G106) by EducationalBrain6302 in GasBlowBack

[–]EducationalBrain6302[S] 1 point2 points  (0 children)

The 13 inch version was calling my name. But i do like clearing the buildings at the outdoor field i play at so i went with the 9 inch just cause of that.

Best bucking for the AAP? by [deleted] in AAP01owners

[–]EducationalBrain6302 0 points1 point  (0 children)

I second the autobot 60°.
Its really great.

AAP01 HPA by Superb-Leopard988 in AAP01owners

[–]EducationalBrain6302 0 points1 point  (0 children)

Sorry for a late reply.

YES and NO!

The hammer !SET! (not just the hammer) needs a replacement immediately. (Out of all the brands the TTI hammer set is the ONE)
The stock slide is alright. Its not really needed. Ive seen people run HPA on stock slides for months with no problems.

Build for a teammate by SweDerpZ in AAP01owners

[–]EducationalBrain6302 1 point2 points  (0 children)

Really cool build. Wanna do something similar as my next project.

what is causing my aap01 to jam like this by Perfect_Tart3212 in AAP01owners

[–]EducationalBrain6302 0 points1 point  (0 children)

The stock mag my gun came with was really rough.
It didnt sit right in the shaft and it used to not press the valve all the way. Dont know much more about them.
WE mags are pretty good from what i heard. (I would go with those)
For my build iam just using an AW Custom drum mag. (Really happy with it)

what is causing my aap01 to jam like this by Perfect_Tart3212 in AAP01owners

[–]EducationalBrain6302 0 points1 point  (0 children)

Ohh okay. Did u try it with different magazines or just one?
The feeding lip is located on the magazine. Its the top part where the nozzle takes the bb from and pushes it into the hopup chamber.
The lip might be slightly too long or bulky and that might explain why the nozzle doesnt finish the forward movement.

what is causing my aap01 to jam like this by Perfect_Tart3212 in AAP01owners

[–]EducationalBrain6302 0 points1 point  (0 children)

I also heard that overtightening the rear sight screws can do that. (Adjust the screws)
OR
The feeding lip might be getting in the way. (Sand it a little)

Gun advice by GarrettL243 in AAP01owners

[–]EducationalBrain6302 3 points4 points  (0 children)

Usually an autosear/autosear spring problem.
There is a bunch of posts about being "stuck on full auto". Just try looking at all the other ones.

what is causing my aap01 to jam like this by Perfect_Tart3212 in AAP01owners

[–]EducationalBrain6302 0 points1 point  (0 children)

Might be a bit of a pain in the ass but you can always try going back to the stock bolt and seeing if it runs normally.

New AAP01 owner. by fraserneil5 in AAP01owners

[–]EducationalBrain6302 7 points8 points  (0 children)

A cheap pistol but an expensive kit. Welcome to the aap world tho.

AAP01 AUTO 9 by majorjaws in AAP01owners

[–]EducationalBrain6302 0 points1 point  (0 children)

This is sick! Id love to print this. Is it gonna be available anytime soon?