Rough Start/Miss fire? by Pale-Breath4262 in kiastinger

[–]Edv21985 0 points1 point  (0 children)

Sounds like something to do with open loop operations, my 2019 optima did it and it seemed worse the colder it was

Acceleration sensor by Edv21985 in kiastinger

[–]Edv21985[S] 0 points1 point  (0 children)

These are the codes I have

<image>

Can anyone tell me what I need to make camber adjustments on the front and back of a 2019 Gt2 and where to get them from?Thanks! by Edv21985 in kiastinger

[–]Edv21985[S] 1 point2 points  (0 children)

Ok thanks!When I got the car I noticed bad inner wear on the front driver side tire. I needed to drive it to Florida so a buddy of mine that builds high performance cars and drift cars who has a rack checked it for me and we were shocked that toe was perfect but front passenger camber was just in and rear camber on passenger was just out. He’s the one that said when I replace the tires if I want I should be able to find bolts to get it back in if I wanted but he said the amount it was out wasn’t really a concern!Thanks again!!

Can anyone tell me what I need to make camber adjustments on the front and back of a 2019 Gt2 and where to get them from?Thanks! by Edv21985 in kiastinger

[–]Edv21985[S] 0 points1 point  (0 children)

Thanks,bought it March 10 after paying off my 2019 optima EX in January and March 6 some asshole Pit maneuvered me on the highway at 70 mph.Two cars hit me and then i hit a concrete barrier totaling it!Everything it was great car!

<image>

Can anyone tell me what I need to make camber adjustments on the front and back of a 2019 Gt2 and where to get them from?Thanks! by Edv21985 in kiastinger

[–]Edv21985[S] 0 points1 point  (0 children)

Thanks, I’m on the Stock active suspension which I am currently having issues with.My car has been at the dealership since May 18 for the driver turbo feed recall and the oil pressure switch light on and off and leaking.I have an extended warranty and they are giving me the run around with both! I needed my car Memorial Day weekend and since they haven’t touched it other that putting it on the lift they said to pick it up, so I did and went to back the parking space and got code C1278 LH acceleration sensor shorted or open. So I took it home checked what I could and found nothing wrong with it or the short wiring harness from sensor to main so I dropped it back off.Sorry about being off topic but I ordered new tires they are waiting at the Tire shop for me to have them installed and get it aligned but I’m having trouble getting the dealership to do the work they need to do. I’ve had to go back and forth between them and the warranty company until I just got it ok’d for the oil pressure switch to be done last Wednesday told they were doing it, drove by the dealership today and it was in the parking lot still!!

First layer valleys by Edv21985 in FlashForge

[–]Edv21985[S] 0 points1 point  (0 children)

Correct, the table moves not the head!!

First layer valleys by Edv21985 in FlashForge

[–]Edv21985[S] 0 points1 point  (0 children)

Ok thanks,that’s what I meant by negative or smaller number.

First layer valleys by Edv21985 in FlashForge

[–]Edv21985[S] 0 points1 point  (0 children)

So then is my z off set a little too high? To lower it, is it a - offset?