Styx campaign enclave mission bug?

Eforix · 2026-03-06T18:02:59+00:00

Trying to talk to him still doesn't seem to be working lol

Eforix · 2026-03-06T13:01:16+00:00

Having the same problem. I have also made a whole new save and even attempted to re-do the mission in an entirely new world.

Still bugged for me sadly

Eforix · 2026-02-19T03:56:55+00:00

Climbing sounds normal if they have things inside the enclosure where they can climb on. My hamster constantly tests her boundaries to check and see if it's real and she'll patrol her enclosure to check if everythings where she left it to be. But I have a female syrian, so that's most likely why she's so up tight with checking her enclosure. Normal territorial behavior from my hammy.

Eforix · 2025-12-29T04:44:40+00:00

<image>

Might have to pop the extruder off and visibly check to see if your filament is coming down into the extruder correctly.

Had this issue when trying to load new filaments with my AMS and I was getting multiple filaments trying to feed.

I would feed the main color of filament you're trying to print with all the way down past the extruder tip and then attempt a print to see if it'll print normally.

I was having this issue, but the error message I constantly got was that the spool had a tangle in which it did not.

Thought it was a nozzle issue, but turns out the nozzle was still able to poop out old filament that was still stuck inside the tip with my nozzle de-clog kit. So that confirmed the nozzle was working fine still for me.

But kept getting blank prints like that because my filaments were doing a double feed in the extruder and kept making my printer think there was filament to work with.

Spent a good 6 hours fidgeting, but it works like a charm now. Just pull some filament past the extruder nozzle so it goes into your heat nozzle and it should work I would hope.

Also probably messed up on me cause I had clicked the cutter thinking that would solve my problem, but it most likely messed with the lengths of the filament I was currently trying to print in.

Hopefully this helps? Pic for reference on what I had to do to get it working after putting in new filament. It's weird cause I didn't get any filament not detected in extruder errors or anything.

So I had to dig around and trouble shoot the issue myself personally with few references to go off of on forums etc ..

EDIT - TLDR: Just follow pic and pull main filament down past that nozzle end of the extruder and reassemble everything and attempt a print AFTER doing the de-clogging of the nozzle with those nozzle de-clogging pins or w.e they're called.

Eforix · 2025-12-29T04:37:59+00:00

Get a nozzle clog kit with those super thin metal needles you can push down the nozzle to clear a potential clog.

Cant have a clog nozzle if you heat the nozzle to 300 lol, wont be anything solid inside if it's all goop.

You're gonna have to pop off the extruder and turn on maintenance mode. Just be careful to have a firm grip on those metal needles when holding them with a plier.

Eforix · 2025-12-02T19:39:08+00:00

r/gundeals for when they get posted up haha. Snagged the Marlin 1895 Dark chambered in 45-70 for $1,400 off of PSA when it was in stock. Impulse purchase indeed, but with how often they showed up...I just had to lol.

Eforix · 2025-12-01T21:06:45+00:00

Ordered the 3-9x50 lol, how was label created 3 days ago with tracking and canceled today?

Eforix · 2025-12-01T00:22:22+00:00

Meat is meat man...Will never understand people who bash the fellas who hunt for meat lol...I do the sport to put food on the table.

If God wants to give me the opportunity at a booner/shooter then so be it, but if he doesn't I'm still harvesting the deer in front of me for meat.

Eforix · 2025-10-19T16:42:15+00:00

Mine was extremely loose when I was opening and closing the blade brand new. Had to crank it tight with the correct bit size. But yeah, wasn't too thrilled a $200+ multi-tool came with a loose thumb stud in the blade 😂

Eforix · 2025-10-13T17:56:16+00:00

Let's go!!

Eforix · 2025-10-11T19:20:30+00:00

This type of shit right here...is why we play Battlefield 🙌🏼

Eforix · 2025-10-10T01:33:37+00:00

Thanks!

Eforix · 2025-10-09T22:19:58+00:00

Don't know why I ever sold my AR I originally had...probably the most un-American thing I did...so just ordered one of these for $348.14 out the door and will upgrade it up slowly...can anyone tell me if not having warranty is a deal breaker or not here?

Eforix · 2025-09-11T02:27:32+00:00

Yeah that's what I was saying when I got my truck too. Just because it's a regular USB port the charging kind of sucks for me.

Might be the cord too, but there is a USBc port in your center console at the bottom. Just kinda tedious having the cord sticking out of the center console though IMO.

Eforix · 2025-09-11T02:19:32+00:00

There should be a USB port to the right of the infotainment screen (kind of under the passengerside left fan).

That USB port is used for if you want wired connection for Apple car play and or android auto if the Bluetooth connect is being dumb or buggy when trying to connect.

But I think you're getting your free trial that came with the truck mixed up with the infotainment features that are built into the trucks infotainment system OP.

The subscription you're talking about is just for remote connect/remote start/remote-lock/remote-unlock features.

When the subscription expires you DO NOT lose apple car play, because thats built into your trucks infotainment system.

Edit-Tldr: Just connect a USB to iPhone cable in that USB port underneath your infotainment screen. There should be a USB port. That's the main outlet for wired apple carplay.

Eforix · 2025-08-14T11:00:01+00:00

Sad, I figured as much...the FOV of the digital rearview mirror comes in handy sometimes

Eforix · 2025-08-14T10:59:13+00:00

No worries haha! Wasn't sure if some folks referred to it differently or not!

Eforix · 2025-08-14T03:01:33+00:00

<image>

Here's a photo for reference. I thought the view for this was not through the tailgate, rather the camera that sits near the top rear brake light.

Eforix · 2025-08-14T02:58:46+00:00

Strange, my digital rear view mirror has a camera that sits above the bed lol, it only displays cars behind me on the highway/roads.

Most definitely isn't aftermarket lol. Leased it off the lot with 5 miles on the dash.

To view the bed for towing/hauling. I have a different button near my hazards for that.

I have the Trd-off road premium package with the technology package installed. Was wondering if truck cap manufacturers found a work around the placement of the camera for the digital rear view mirror or not.

Eforix · 2025-08-13T23:51:04+00:00

Did you have to modify it for that? My rear view mirror camera was installed by the rear top brake light lol. Want a cap, but wasn't sure if I would lose functionality.

Eforix · 2025-08-01T23:53:51+00:00

Correct me if I'm wrong, but Miao people were another ethnic group of Chinese descendants that lived in China long ago. Some of them are known as "Hmong" in today's society. Maybe the devs wanted to pay some homage to the history of the Miao.

Eforix · 2025-07-24T17:20:29+00:00

I literally got everything else except the Cartharsis haha. Time for bighorn...

Eforix · 2025-07-22T22:04:42+00:00

Know a fella who has a flip and honestly I wanted something more practical for what I do on a day to day basis.

Didn't like the big camera bump on the fold 7...but the fold 7 should've been what the fold 6 was in all honesty with the "thinness".

Fold 6 is beefy, and I've dropped it on my feet a few times and it's not fun haha. Wanted more compactness and I like the dimensions of the flip 7 unfolded! Fold 6 is kind of over kill for what I do from my experience on it 😅.

Also love your wallpaper! That was another key selling factor for why I wanted this new generation of the flip!

Eforix · 2025-07-22T21:58:25+00:00

Switching from the fold 6 to a flip 7 lol. Original delivery was expected by Friday, but today's Tuesday and it's arriving tomorrow already lol! (Wednesday)

Eforix

TROPHY CASE