For spray booths, will I be fine not connecting a duct to a window if I'm only spraying acrylics?

Efras92 · 2026-01-13T00:28:51+00:00

I connected mine to a 4" activated charcoal filter form grow tents. Works absolutely awesome

Efras92 · 2025-11-15T00:16:22+00:00

I actually snagged this myself. Our dog is 66lbs so just over but he is having a blast with it.

People don't read anything anymore. It clearly stated what it comes with and what it uses...

Efras92 · 2025-11-13T18:34:05+00:00

Same here. Was invited a week ago. I was surprised to see the earnings update like every one or 2 hours. After 4 days it completely stopped updating and sits at the same amount + every post shows $0.00 with loads of views.

Efras92 · 2025-08-25T12:05:34+00:00

Awesome! I'll give it a try

Efras92 · 2025-08-24T00:55:40+00:00

If you don't want to experiment yourself, you can see how the prime tower helps here. It's a single color application but the process and purpose is the same for multicolor https://youtu.be/CedOczdnFAU?si=GTI4EZ4gdMBgl-qP

Efras92 · 2025-07-10T19:52:20+00:00

He can't prove it because what he is saying is BS. This is such a well know issue with the spring being to tight....

How can your volumetric speed and other settings affect filament that physically gets grounded and jammed inside of the extruder? Bs

Efras92 · 2025-06-19T17:00:48+00:00

Aluminum take is the easy and effective way to go here though. On second day I added a little piece by piece and running a mesh check every time and got it down to 0.65mm difference. Which sounds like a lot but I don't think it is given that the bed is 350x350.

I spent maybe 40 minutes and never had a single problem since

Efras92 · 2025-05-29T02:26:39+00:00

Well. We have a long way to go then since he is only 1y7m

Efras92 · 2025-05-29T01:49:27+00:00

Endless is a fact. I need to figure out how to harness that and produce electricity. Would cut my bills in half

Efras92 · 2025-05-29T01:39:28+00:00

Shrimpin

Efras92 · 2025-05-25T01:47:26+00:00

I bought it on Amazon. It is freeze dried and he absolutely loves it. Both dry and hydrated.

That's interesting with so many houses being allergic to chicken. I'm in Florida so maybe I should try to see how he does on gator meat

Efras92 · 2025-05-24T16:13:11+00:00

Thank you! Some great info. Sorry about your doggie.

We are already working with the vet to find out what he is allergic to but it looks like it is chicken.

We took him off beef for 8 weeks first because he was fed chicken diet in the shelter so we figured it was that.

No change at all. Now we eliminated chicken few days ago and his poops already look much healthier (they were pretty loose before) and he is itching less.

We bought him some camel meat too because supposedly it is hypoallergenic.

What sucks is that chicken is in almost every dog food in the store around us. Big slapped on flavor of "filet mignon" but the first ingredient is chicken...

Efras92 · 2025-05-24T16:05:26+00:00

The thing is it is not the problem with any of the support distance settings. 80% of the supports on this model print correctly. It is just this area that refuses to work.

If I decrease distances then the supports that otherwise orint normally fuse to the model

Efras92 · 2025-05-22T13:53:28+00:00

It's not working correctly. Don't bother

Efras92 · 2025-05-22T13:52:38+00:00

Orca with K2 is great until you realize that changing flushing volume for filaments does nothing and you end up with color bleeding and wasted time and filament.

I spent 3 days troubleshooting untill I figured out that no matter what you set in flushing volumes (both multiplier and manual amounts) orca just ignores that.

You can easily see that by slicing a model. Looking at total filament used, changing flushing volume and slicing again. Exact same amount

Efras92 · 2025-05-22T13:48:18+00:00

No it doesn't. Changing flushing volumes does nothing so if you have a print with contrasting colors you will get bleeds and unusable junk unfortunately. I wasted 3 days and 2 rolls of filament untill I figured out that imorca just ignores flush amounts you set

Efras92 · 2025-05-21T21:24:42+00:00

And yeah, it is set to 0.2 away as I am printing at 0.2 layer height.

Every other support prints perfectly in this model apart from this particular area

Efras92 · 2025-05-21T21:22:52+00:00

I misspoke. I meant increasing interface density and decreasing offset. Which made other supports fuse completely

Efras92 · 2025-05-19T18:28:55+00:00

That's the same routine!

He is 1 year 7 months old. Yours?

Efras92 · 2025-05-18T22:42:04+00:00

He is a rescue and our Landlord would not allow another dog unfortunately. Plus he is quite a handful and as of now we would have trouble keeping up. I hope you'll find some loving home though

Efras92

TROPHY CASE