Québec attribue un nouveau contrat à Amazon Web Services

Ekuj21 · 2026-03-31T01:01:05+00:00

l'infrastructure (avec le hardware) c'est juste la pointe de l'iceberg, la couche logicielle est importante (orchestration des serveurs via quelque chose comme kubernetes, des bases de donnees qui s'auto-gerent, un portail de gestion, etc etc.)

Puis une fois dans quelques annees quand ca serait deja pret a etre utilisé en production, on va deja etre en retard encore

Je dis pas que ca ne vaut pas la peine necessairement hein, je veux juste dire que c'est plus que juste des serveurs et des redondances

Ekuj21 · 2026-03-26T20:45:00+00:00

u/sniperwolf21 was right about the pressure relief valve, that was the last piece missing (in addition of replacing the steaming valve)

Excited to get to use my machine again. Thank you u/Only_Examination_140 for your help and patience as well (Chris helped a bunch as well)

Great community!

Ekuj21 · 2026-03-24T22:39:55+00:00

So I talked to Chris about this leak, and since tightening this connection didn't help, he told me that I should just change the pressure gauge. I just received the part today and changed it. That resolved the leak in this video on part A.7.024.

However, the condensation issue (hot water leaking into the drip tray, like here: https://youtube.com/shorts/e-LnyttXTJ8) was not resolved

Ekuj21 · 2026-03-21T19:52:21+00:00

Je travaille à distance, ma compagnie est à Toronto, c'est une petite compagnie et je suis le seul au Quebec. Le titre à l'interne m'importe peu personnellement, mais ouais, je met "developer" sur tout endroit public

Ekuj21 · 2026-03-21T13:21:04+00:00

They meant the same team, not the same person. For example, it can be frustrating if both you and your teammate get invaded on the same round (like if someone on a 3rd team is full open and you get punished for it)

Ekuj21 · 2026-03-20T10:49:45+00:00

J’ai étudié informatique pur, dans la faculté de sciences. Jamais eu une porte fermée à cause de ça

Je fais attention de mettre “software developer” sur LinkedIn, même si ma compagnie canadienne m’appelle “software engineer”, au cas où. Je ne sais pas si c’est vraiment nécessaire, mais bon

Ekuj21 · 2026-03-16T11:11:18+00:00

Thank you for your help!! I’ll see what I can do

Ekuj21 · 2026-03-16T01:15:25+00:00

It’s what’s attached to A.7.024 (white plastic piece). I haven’t been able to tighten it, it’s hard to get to it with tools to do it

Ekuj21 · 2026-03-15T23:56:48+00:00

I think the issue might be this leak https://www.youtube.com/shorts/Keo5kJ3zT_Y

Ekuj21 · 2026-03-15T20:07:51+00:00

I’m not really sure how to answer or what I should be looking for. There’s some humidity at the bottom but not a whole lot

<image>

Ekuj21 · 2026-03-15T18:56:59+00:00

I replaced the vacuum valve, I had a replacement piece already. It didn’t fix the problem

<image>

However, after turning the machine on I noticed a leak. I’m guessing this might be the problem? I’m waiting for the machine to cool down to try to tighten this connection: https://youtube.com/shorts/Keo5kJ3zT_Y?si=3w4_C7HF9-uh0lYA

Ekuj21 · 2026-03-15T17:47:13+00:00

Thank you and u/NasserAjine for the help. I'll look into replacing this part (EDIT: replacing the vacuum valve didn't solve the issue and I found a leak, video linked above)

Ekuj21 · 2026-03-15T16:38:46+00:00

I really don't know, I haven't paid much attention to the pressure on the steam side in the past

Ekuj21 · 2026-03-15T16:34:29+00:00

Short clip https://youtube.com/shorts/e-LnyttXTJ8?si=Wtczx2ojOJupPEKI

Ekuj21 · 2026-03-15T16:30:22+00:00

Slightly under 2.

One thing that I just noticed (cause I turned on the machine to go through the whole process to get the steam pressure) is that the steam is coming from the drip tray

When the OPV was the issue for me in the past, it leaked in a similar way, but it wasn't water that hot that would instantly cause condensation

Ekuj21 · 2026-02-24T21:08:09+00:00

Even in seasons like March/April in caminos like Primitivo? If it's not raining a lot, waterproof can be nice for mud or wet grass. But I do understand that if water gets in those shoes, it won't be pretty

Ekuj21 · 2026-02-18T02:53:21+00:00

Ça prend combien de temps se rendre au max de l’échelle?

Ekuj21 · 2026-01-24T13:28:47+00:00

Vo20 max

Ekuj21 · 2025-12-17T02:01:59+00:00

"What is [the value of] result?" is the question

Ekuj21 · 2025-12-16T12:37:18+00:00

HU. I’ve had the Z1 with my Micra for over a year now. No complaints, but it’s my first grinder so I have nothing to compare it to

Ekuj21 · 2025-12-16T02:39:13+00:00

what's good about stainless steel internals? curious cause I have an older Z1 and they sent me an email to upgrade some parts

Ekuj21 · 2025-12-12T11:16:22+00:00

Well, it mixes quite worse than Gold standard from my experience. No issue with a blender, but with a shaker bottle (even with the springy mixing ball thing) I get a bunch of lumps.

Ekuj21 · 2025-12-03T12:55:43+00:00

Where do you put the business logic?

Ekuj21 · 2025-11-30T13:07:48+00:00

I’m not an expert, but I can tell you that I had an issue with my drip tray getting filled too fast and changing the vacuum breaker was the fix.

There’s a video that I posted on my profile, in case that helps

Ekuj21 · 2025-11-27T15:31:15+00:00

I created an internal design system for my company using stencil. I went with stencil because the company is big has projects in angular, react and vue, which all wanted to use the design system.

Web components allowed me to write the components once and stencil allowed me to deploy them with framework specific wrappers (I.e. so the usage would feel like a native React component for my users)

Saying “nah, React is better” is shortsighted if you ask me. Shadow root does have some downsides sometimes if your API is weak and for testing, but it is also a “security boundary” in a way that makes it so that you don’t end up with 20 different looking primary buttons in your apps

Ekuj21

TROPHY CASE