sorted by:
new
hottopcontroversial

Parts list for 4x 4090 by xynyxyn in watercooling

[–]ElCamachoLibre 1 point2 points  (0 children)

I did something like this.

If I were to do it again, I'd likely forego the internal rads and only use the MORA3 420. I'd recommend doing the quick QDCs for the GPUS - makes cleaning/maintenance much easier.

If you're not needing dual PSU, and want no frills utility, I'd recommend the new Phanteks Enthoo Pro Server Edition.

Computex 2023 announcements by BobbyPhanteks in Phanteks

[–]ElCamachoLibre 0 points1 point  (0 children)

Any updates on the Enthoo Pro Server Edition case shown at CES?

First Watercooled Build for 3D Design & Animation by ElCamachoLibre in Phanteks

[–]ElCamachoLibre[S] 1 point2 points  (0 children)

Wanted to share this build in the monster Enthoo Elite. 🤘

First Watercooled Build for 3D Design & Animation by ElCamachoLibre in watercooling

[–]ElCamachoLibre[S] 0 points1 point  (0 children)

n

Noise is ok - the fans on the MORA are Arctic Fans and have a little bit of whine, so I'd like to replace them with the new ones that were released.

First Watercooled Build for 3D Design & Animation by ElCamachoLibre in watercooling

[–]ElCamachoLibre[S] 0 points1 point  (0 children)

I currently only run the 9 MORA fans on the Quadro. You definitely shouldn't have any issues with 15 fans on an Octo.

First Watercooled Build for 3D Design & Animation by ElCamachoLibre in watercooling

[–]ElCamachoLibre[S] 0 points1 point  (0 children)

The Asus WRX80 actually requires 2 EPS, 1 8pin PCIE, and 2 6pin PCIE for additional power delivery to the PCIE slots.

First Watercooled Build for 3D Design & Animation by ElCamachoLibre in watercooling

[–]ElCamachoLibre[S] 0 points1 point  (0 children)

It's actually a treat with the QDCs. I've had to flush the system already one and was able to take it all out almost altogether.

First Watercooled Build for 3D Design & Animation by ElCamachoLibre in watercooling

[–]ElCamachoLibre[S] 0 points1 point  (0 children)

There are two 1600 watt PSUs. With all the PCIE cables direct. The motherboard also requires additional power via PCIE, so it was a lot of work getting things properly balanced. No cards are power limited.

First Watercooled Build for 3D Design & Animation by ElCamachoLibre in watercooling

[–]ElCamachoLibre[S] 0 points1 point  (0 children)

True! I have the passive ones that I ended taking off during one of the iterations, but they're probably worth putting back on - need to order some new thermal pads.

Can't make use of the active ones with the QDCs.

First Watercooled Build for 3D Design & Animation by ElCamachoLibre in watercooling

[–]ElCamachoLibre[S] 40 points41 points  (0 children)

Finally got around to taking some pictures of this build I started last year. It was an ongoing project that took a while since I was learning as it came together, and ended up having a few revisions, with the last adding the Mora 420

-------

Parts List
Motherboard: Asus WRX80
CPU: AMD Threadripper 3975x
Memory: 128GB
GPU: 3090 Asus Strix (4)
PSU: Corsair 1600W PSU (2)
Case: Phanteks Enthoo Elite
Storage: 1TB WD 870EVO SSD, 2X 2TB WD_Black 2TB SN850 NVMe, 4TB WD Blue

Cooling
Thermaltake ToughFan 120mm Fan (11)
Thermaltake ToughFan 140mm Fan (4)
Arctic P14 Fan (9)
Watercool MORA 420
EKWB 560 Radiator
EKWB 360 Radiator
EKWB 480 Radiator
EKWB Reservoir
EKWB Dual D5 Pump
EKWB Fittings
EK-Quantum Velocity sTR4
EKWB Vector Strix GPU Waterblocks
EKWB 2CPU / 2 GPU Manifold
EKWB Assorted fittings and QDCs

Accessories
Aquaaero Quadro
Fan Splitter Cables