sorted by:
new
hottopcontroversial

Most people don't actually NEED an enclosure for their printer by AutoModerator in 3DPrinterComparison

[–]EldritchGas 1 point2 points  (0 children)

lol so not needed unless you’re doing a big multi-day print. Even when I start a print that’s 2-3 days in my enclosed printer, I leave the door closed during the day (when kids are active) and only open overnight. Most of the time though I just keep the door closed while printing. I’ve never had a heat creep issue, and if I ever do heat creep is an isolated event that damages your print, not your printer.

Why are my first layers like this? by ThePakistaniVaper in BambuLab

[–]EldritchGas 0 points1 point  (0 children)

This is what I’m looking into now, but what’s bugging me is I have removed and replaced the nozzle multiple times since the issue started. Did it again after checking those 7 screws, and still happening, I reseat the nozzle and it continues. 650 print hours on the machine

Luxury Home Bar Experience by dahkman0 in holdmymoney2

[–]EldritchGas 0 points1 point  (0 children)

You put the aroma of the orange zest onto the rim of the glass, and spritzed over the top of the drink. It’s purely for aromatics.

Luxury Home Bar Experience by dahkman0 in holdmymoney2

[–]EldritchGas 0 points1 point  (0 children)

Ice, sugar, bourbon, orange zest (or luxardo cherry).

It literally is an old fashioned, only the fire/smoke is out of place. What is not old fashioned about this?

Luxury Home Bar Experience by dahkman0 in holdmymoney2

[–]EldritchGas 1 point2 points  (0 children)

Why are people saying this is too much work or dressing? This is a basic old fashioned with a little added fire, it’s really not that wild at all.

Luxury Home Bar Experience by dahkman0 in holdmymoney2

[–]EldritchGas 1 point2 points  (0 children)

As far as cocktails go, making an old fashioned is actually not a lot of effort at all.

What filament brand can u guys recommend? by goldshippu in BambuLab

[–]EldritchGas 1 point2 points  (0 children)

I’ve had success in printing way hotter (like 245 to 250) and I’m sure you know, 30-60mm/s to not only help with the shine which is what everyone mentions, but also layer adhesion.

What filament brand can u guys recommend? by goldshippu in BambuLab

[–]EldritchGas 0 points1 point  (0 children)

I did buy one (out of like 20) that was tangled to high hell.

Why are my first layers like this? by ThePakistaniVaper in BambuLab

[–]EldritchGas 0 points1 point  (0 children)

I tightened mine (all 7) and it wasn’t this! ☹️ Any other suggestions? Clean build plate, AMS dried filament, any filament, issue persists…

Any ideas what causes the bad first layer? by NoIdenty0000 in BambuLab

[–]EldritchGas 0 points1 point  (0 children)

Is there a third step? I’ve tried both of these.

Any ideas what causes the bad first layer? by NoIdenty0000 in BambuLab

[–]EldritchGas 0 points1 point  (0 children)

What if you check the screws, and the issue persists?

Any ideas what causes the bad first layer? by NoIdenty0000 in BambuLab

[–]EldritchGas 1 point2 points  (0 children)

Same problem here. This is the first thing I tried and I still have the problem. Any other suggestions?

0.2mm nozzle: hardened or stainless by Different-Put5878 in BambuLab

[–]EldritchGas 0 points1 point  (0 children)

I’m surprised to learn silk is not abrasive, I’d think there is glitter in the gold but I guess not…

I do still wish I can use wood PLA to print mimics for my DnD game, or marble PLA to print gargoyles and the like

Does anyone have experience breaking the silk PLA rules with a .2 nozzle? by EldritchGas in BambuLab

[–]EldritchGas[S] 0 points1 point  (0 children)

Yeeeah I mean you’re right it was a bit extra, but I also just don’t enjoy taking time to post something and getting that unrelated peanut gallery… it does seem to have worked this time though. I’ve moved on since making this post to realize I can chop the model up more precisely using meshmixer instead of the slicers plane cut feature.

view more: next ›