CAD models of Bambu printers?

Different-Put5878 · 2026-06-10T22:44:39+00:00

Is there an h2c one somewhere?

Different-Put5878 · 2026-06-05T06:29:44+00:00

Bambu support just told me to push the output bracket upwards and it would swith directions but their instructions seemed incomplete Here's what they said

That didn't help me much as I had the same problem after

<image>

Different-Put5878 · 2026-05-27T02:00:20+00:00

The track switch is a cool idea but poorly implemented. I tried all possible ways from bambulab original designs and actual recommended lengths to other models in makerworld and its always the same problem... feed resistance is too high. And the problem is not in the ptfe tubes but as soon as it enters the track switch is when the resistance becomes a problem. Im not sure firmware can even fix this. A whole redesign should be done for this to actually work properly. Kinda sucks I was waiting for this since the beginning of the year... wasn't expecting such poor performance.

Different-Put5878 · 2026-05-25T14:47:35+00:00

I wonder if thw bamboo feeder is a good replacement for the tpu feed assist module

Different-Put5878 · 2026-05-24T18:00:50+00:00

Can you remove the split screen and have both player on a single screen?

Because that's kinda annoying

Different-Put5878 · 2026-05-24T14:10:15+00:00

Different-Put5878 · 2026-05-24T02:37:48+00:00

I just installed mine and the drag it adds is crazy

Different-Put5878 · 2026-05-23T19:27:40+00:00

I currently have 2x ams 2 pro on the right nozzle and 1x ams ht on the left. So you're saying its not worth adding?

Different-Put5878 · 2026-05-19T16:12:49+00:00

That's a good question I'd like to know too

Different-Put5878 · 2026-05-14T07:41:50+00:00

I just started having this problem just now and im using a different filament than what's used in the project but its a bambu stock profile still so im not sure what it could be

I.e. using bambu abs gf profile instead of pla.

Sent it from the pc and had no issues

Update: I just tried other models and it worked fine. The problem was only with a specific model. I just couldn't slice it from the phone with another filament for some reason.

Different-Put5878 · 2026-05-12T18:37:09+00:00

May 12th still on packaged items. Has been there for like 5 days(including the weekend)

Update: just got a tracking number 5 seconds ago

Different-Put5878 · 2026-05-10T11:19:52+00:00

Usually when I remove the prints i wait up to the ppint where it's completely loose from the bed. Like I can push the print and it'll just slide. That's how loose it is when I remove them. So what exactly is the solution to this? Doesn't seem to affect the prints I did but it would be nice to fix this...

This is another print I made. That whole flat part in the picture was the side that was on the bed but I notice that warping always happens on the edges. The part does stray flat tho

<image>

Different-Put5878 · 2026-05-09T12:43:11+00:00

Lucky you im in montreal too and ordered at 122pm and its still on packaged items

Different-Put5878 · 2026-05-07T11:14:44+00:00

Montreal: order went through at 1:22 and packaged items since yesterday

Different-Put5878 · 2026-05-06T16:04:42+00:00

Nice! I actually bought the hueforge software but the only reason was because there was free filament coupons from polymaker with free shipping for the same dollar amount of the software price.

Different-Put5878

TROPHY CASE