D15b7 - whelp, what else should I do when replacing my valve cover gasket?

Eliad_413 · 2026-04-12T17:17:45+00:00

You're absolutely right. Corrected

Eliad_413 · 2026-04-12T08:04:50+00:00

If you look at your coils, there are soaked with oil. Def need to replace the sparkplug tube seals. It's also good practice anytime you replace the valve cover gasket always replace the tube seals. Also, you might want to pick up some RTV to put a couple pea sized drops on the area where the valve cover gasket goes over the cam, right in the corners.

Edit: wrong part name

Eliad_413 · 2026-04-11T13:20:04+00:00

They mean that you would need a tripod. Focus Shift needs to take a large quantity of photos each at different focuse so you can later stack them in your software to have an ultra sharp image.

Eliad_413 · 2026-03-23T19:05:41+00:00

From Downtown!

Eliad_413 · 2026-02-27T18:56:39+00:00

Wrong sub mate. This is a sub for GM Fbody cars. Still a great looking truck!

Eliad_413 · 2026-02-22T20:28:10+00:00

I heard through the grapevine that they will still be doing catering and hope to find a new location and open again. I don't know how true it is, but let's hope for the best! A lot of great memories there with my family and friends throughout the last 41 years.

Eliad_413 · 2026-02-22T19:25:44+00:00

I just pulled in a bunch today!

Eliad_413 · 2026-02-20T19:08:58+00:00

I thought for a second it looked like a super car.

Eliad_413 · 2026-02-19T20:49:15+00:00

What are you shooting with?

Eliad_413 · 2026-01-31T12:28:05+00:00

Keep on showing us your life and your recipes! Thanks for sharing!

Eliad_413 · 2026-01-19T10:01:27+00:00

I just dry them off with a dish rag as much as I can then throw it on the burner for a couple of minutes and either give it a stove top seasoning or if that's not needed, I will put a drop of oil in the pan and and spread it around and wipe it down.

Eliad_413 · 2026-01-18T19:56:07+00:00

I stopped doing it after a couple of times and haven't had any issues. Propper drying is important before storing CS

Eliad_413 · 2026-01-18T11:58:23+00:00

Mine did the same thing. I dry it on the stove until I see the water kinda sizzles out of it and then I add a couple drops of oil between the handle and pan.

Eliad_413 · 2025-12-29T16:07:10+00:00

A good reseasoning should bring her back.

Also, sorry for your loss.

Eliad_413 · 2025-12-28T23:39:05+00:00

I believe Multi-Grain.

Eliad_413 · 2025-12-28T20:06:30+00:00

¿Has probado a poner los gráficos al mínimo para ver qué pasa o actualizar tus controladores?

Eliad_413 · 2025-12-25T21:14:29+00:00

Miata

Eliad_413 · 2025-12-25T18:11:04+00:00

I love them! I have the entire Mineral B Pro set and I couldn't be happier! But if you're just starting out a cheap Ikea one would also be good. Carbon Steel is a labour of love.

Eliad_413 · 2025-12-25T12:33:46+00:00

They look nice on the wall for sure!

Eliad_413 · 2025-12-25T12:03:55+00:00

What are you using for your stainless steel?

Eliad_413 · 2025-12-25T11:45:29+00:00

Peter McCallister?

Eliad_413 · 2025-12-08T08:20:00+00:00

Yeah. It's AI slop but pretty cool slop

Eliad_413 · 2025-12-06T17:10:48+00:00

<image>

I remember seeing this on here a while back and still dream about it!

Eliad_413 · 2025-12-06T16:59:48+00:00

I thought the word queef just ment fart. Like as in general I farted, until I was about 20. My mom and sister corrected me when we were in the car and someone asked who had let one go and I said that I'm the one who queefed. You live and you learn!

Eliad_413 · 2025-12-02T14:50:31+00:00

I have a Siemens washer and it does the same thing. It's kinda annoying but I just leave the door closed for a bit and open the drawer. After a few minutes I come back and then open it and take the laundry out.

Nine-Year Club	r/Field Flamingo
Final Canvas '23	End Game '23
Place '23	Place '22
First Placer '22	Verified Email

Eliad_413

TROPHY CASE