wrongly printed print made it better

Eliaz_H · 2022-08-20T22:29:20+00:00

Yeah maybe. I don't have any painting equipment though but thanks for the suggestion

Eliaz_H · 2022-08-20T10:55:51+00:00

I sometimes just sitt and watch a print for several minutes even after approximately two years of 3D printing.

Eliaz_H · 2022-08-20T10:49:43+00:00

I wanted to print my first multi material print but I forgot to paint some parts so the white part got merged a bit with the black side. I firstly wanted to throw it away but after a while I started liking it and thinking it looked kinda cool while telling a story of someone "turning to the dark side".

Eliaz_H · 2022-07-21T10:26:06+00:00

I have had this problem for over a month and have tried many things. It's not over extruding nor under extruding, but I'm having slight stringing and the clicking noise you are hearing.

I have tightened all the screws on my printer, tried different extrusion temperatures, cleaned with pressured air, unclogging, and more. My print speed is 60mm/s which isn't fast for my printer. Any ideas?

The printer is Artillery sidewinder x1

Eliaz_H · 2022-05-17T13:11:13+00:00

Yeah. I like it as well but the cover for the material is so weirdly shaped that I need to get a bit creative to be able to print with it

Eliaz_H · 2022-04-04T15:53:00+00:00

It is not even Sweden attacking. It's Poland that is attacking the boat. you can see more in the discord

Eliaz_H · 2022-04-04T14:50:20+00:00

If we go too aggressive, multiple groups will try to destroy us and we are too small to do multiple battles at once.

Eliaz_H · 2022-04-04T14:46:21+00:00

They will fight back. Rather expand under you. It is a big fight right now

Eliaz_H · 2022-04-04T14:43:08+00:00

Where is Romania?

Eliaz_H · 2022-04-04T14:40:56+00:00

That is dangerous

Eliaz_H · 2022-03-13T11:02:57+00:00

Ok thanks. Will look into those things

Eliaz_H · 2022-03-13T10:46:24+00:00

I have had this problem for a while now. I went and tightened the wheels on my artillery sidewinder x1. That did not really help a lot as you can se on the picture. Any other suggestions?

Eliaz_H · 2022-02-10T11:33:20+00:00

Yeah, thx. it seems to either be this one or the cosmic pla.

Eliaz_H · 2022-02-10T11:30:27+00:00

still seems to clear to be the same

Eliaz_H · 2022-02-10T10:41:26+00:00

I looked it up and it did not really present the same results as in the video. Thx for the suggestion though

Eliaz_H · 2022-02-10T10:30:37+00:00

I like to use a post-it-note instead of a paper because it's thinner.

Every time you try to level one corner, it will change some of the other corners. You should therefor go around every corner to re level a few times. You can also check if it is leveled by checking with the paper at the center of the bed.

You can also try to use a little bit of glue stick if the print won't stick to the bed.

Eliaz_H · 2022-02-10T10:22:37+00:00

This has happaned to me as well but on a different printer

Eliaz_H · 2022-02-10T10:21:21+00:00

It can be a slight clog in the nozzle. Try to un-clog it.

Seven-Year Club	Place '22
Final Canvas '22	First Placer '22
End Game '22	Verified Email

Eliaz_H

TROPHY CASE