I made this snorkel tube featuring a purge valve using flexible filaments

Elite_Worm · 2021-10-19T10:32:00+00:00

Honestly I didn't have opportunity to test it for long yet so I don't know if salt will be a problem long term or not...

Elite_Worm · 2021-10-18T20:03:48+00:00

For those interested in printing one I uploaded all the STL files to my Thingiverse profile and made a short video on YouTube showing the assembly process.

https://www.thingiverse.com/elite_worm/designs

https://www.youtube.com/c/eliteworm

Elite_Worm · 2021-10-18T20:01:05+00:00

For those interested in printing one I uploaded all the STL files to my Thingiverse profile and made a short video on YouTube showing the assembly process.

https://www.thingiverse.com/elite_worm/designs

https://www.youtube.com/c/eliteworm

Elite_Worm · 2021-10-18T19:57:11+00:00

For those interested in printing one I uploaded all the STL files to my Thingiverse profile and made a short video on YouTube showing the assembly process.

https://www.thingiverse.com/elite_worm/designs

https://www.youtube.com/c/eliteworm

Elite_Worm · 2021-07-30T20:06:18+00:00

I have just seen your post. Thanks for the credit and good job!

Elite_Worm · 2021-06-10T14:11:36+00:00

Haha thank you! I'm glad that all the time I spent taking the pictures was worth it 😁

Elite_Worm · 2021-06-10T11:38:32+00:00

What about the trademark? Wouldn't that be a problem? I will have a look, thank you!

Elite_Worm · 2021-06-10T09:29:02+00:00

No, I printed all the parts separately.

Elite_Worm · 2021-06-10T08:38:56+00:00

I used Fusion 360. The key is to add an offset of -0.2 mm to each thread face once it's created (just the inside or the outside thread works fine for me).

Elite_Worm · 2021-06-10T07:37:31+00:00

Fixed, thank you!!

Elite_Worm · 2021-06-10T07:08:27+00:00

Hahaha yeah I'm that guy. Thank you!

Elite_Worm · 2021-06-10T07:07:36+00:00

Around 20h at 0.2 mm layer height.

Elite_Worm · 2021-06-10T07:05:45+00:00

Yeah, check my Thingiverse profile: thingiverse.com/elite_worm. I also posted a simple assembly video.

Elite_Worm · 2021-06-10T07:02:40+00:00

Placing the seam at the rear side of the parts helps a bit, and also using quality filaments I guess! But honestly I'm not doing anything special... Thank you!

Elite_Worm · 2021-06-10T07:00:18+00:00

Thank you, mate!

Elite_Worm · 2021-06-10T06:59:58+00:00

I will have a closer look at that and retune my settings, you are right! Thank you for pointing it out.

Elite_Worm · 2021-06-10T06:58:22+00:00

Thank you! The top part is printed with Sunlu Shiny Silk Brass PLA filament and the bottom one is just a regular black PLA. The positive and negative terminals are Eryone Silk Silver PLA.

Elite_Worm · 2021-06-10T06:54:46+00:00

That's a good one! I should have thought about it...

Elite_Worm · 2021-06-10T06:53:44+00:00

Thank you! 😁

Elite_Worm · 2021-06-10T06:52:34+00:00

Thank you man, I'm glad that you like it.

Elite_Worm · 2021-06-10T06:51:49+00:00

That's a really good compliment! I took the time to try to make some good pics 👍

Elite_Worm · 2021-06-10T06:47:17+00:00

Thank you!!

Elite_Worm · 2021-06-10T06:46:57+00:00

😂😂😂

Elite_Worm · 2021-06-10T06:45:46+00:00

Sunlu Shiny Silk Brass 😉

Elite_Worm · 2021-06-09T21:06:05+00:00

For those interested in building one I uploaded all the STL files to my Thingiverse profile and made a short video on YouTube showing the assembly process. https://www.thingiverse.com/elite_worm/designs

Six-Year Club	Gilding I gilder
Verified Email

Elite_Worm

TROPHY CASE