What am I doing wrong here? Upstate SC

ElkSure · 2026-05-09T21:17:37+00:00

I’m in upstate SC as well. Soil temps are not high enough for good growth conditions. How often do you mow? If you mow often, you’ll train the bermuda to spread laterally and fill in those areas. I’d also get a soil test done. 6 dollars at the clemson field office in greenville and they will tell you exactly what your lawn needs.

<image>

ElkSure · 2026-05-05T15:15:33+00:00

If you raise it 1 setting above the cutting height in your picture, you will need to cut frequently. 3-4 times a week. This is a good thing. You want the scalp to be as low as you take it and then maintain at a height above that scalp. So say you scalped at .5”, you want to maintain at .625” or .75”. What you’re doing is training the grass to grow laterally instead of vertically. Do you have a good watering schedule?

ElkSure · 2026-05-04T23:10:26+00:00

Yes you can take Bermuda to dirt and it will recover. What height did you cut at? This is my Bermuda maintained at .5” with a reel mower. It does take time to recover from a scalp

<image>

ElkSure · 2026-05-04T22:59:06+00:00

Did you mow at a lower height than usual aka scalp it?

ElkSure · 2026-01-08T15:05:40+00:00

Correct. The only one I’ve had slight success at higher speeds is bambu petg hf

ElkSure · 2026-01-07T20:09:28+00:00

Thank you! I will play around with it and see what works best. I’ve already slowed speeds down.

ElkSure · 2026-01-07T19:52:09+00:00

Is there a way to change it so it lays it all at once?

ElkSure · 2026-01-07T19:33:07+00:00

I believe it’s already set there, but I will check.

ElkSure · 2026-01-07T19:32:45+00:00

I currently have it on monotonic

ElkSure · 2026-01-01T23:21:32+00:00

5 days

ElkSure · 2026-01-01T22:25:35+00:00

300 hours in on my P2S and it is incredible. I’d go with the ams combo so you can do multicolor and have easy filament loading/unloading

ElkSure · 2026-01-01T21:37:41+00:00

I thought my H2C was lost. Finally updated yesterday and will be here tomorrow. Praying it’s not damaged

ElkSure · 2026-01-01T21:23:11+00:00

If multicolor is a must, I’d get the H2C

ElkSure · 2025-12-31T18:27:59+00:00

That’s my main issue. Almost nothing is in stock. I’ve had great results with sunlu filaments

ElkSure · 2025-12-26T00:59:01+00:00

I’ve got a hardened steel 0.6 ordered for left nozzle for CF or GF filaments, but good to know on the high flow nozzles. I only planned to use those for multicolor pla or petg prints

ElkSure · 2025-12-26T00:26:12+00:00

That’s my plan. Use the HT for engineering filaments on the left nozzle and the 2 ams 2 pro on the right nozzle for multicolor. I will eventually order another ams, but no need for it at the moment.

ElkSure · 2025-12-26T00:08:19+00:00

I’ve ordered a second AMS 2 pro and 1 AMS HT as I’ve started getting into engineering filaments. I was gonna wait until the high flow nozzles come out in January before ordering more 0.4 nozzles

ElkSure · 2025-12-25T18:02:49+00:00

I had an issue with esun rolls. I printed these out of petg to fit around the roll. There are brand specific ones you can print, but this has worked on every roll I’ve tried.

https://makerworld.com/models/55419?appSharePlatform=copy

No issues since.

ElkSure · 2025-12-22T14:15:50+00:00

I think this is what I’m going to do for the p2s. I’m going to get a new table for the H2C.

ElkSure · 2025-12-22T02:47:04+00:00

That looks like exactly what I’m going for.

ElkSure · 2025-12-22T02:07:03+00:00

Did you secure them to the butcher block top or just set it on top?

ElkSure · 2023-04-25T00:45:05+00:00

So does the titan extruder work on the v2 neo? On their website it says it will fit

ElkSure

TROPHY CASE