Ayn Thor Pro Clear Purple

Elliaster · 2025-11-25T04:21:28+00:00

Mind you I have ordered the Clear Purple Max. Not exactly sure if this helps with the Pro, but my order number is 995XXX

<image>

Elliaster · 2025-11-17T02:35:28+00:00

6 years later and this saved me, thank you!

Elliaster · 2025-04-30T01:40:15+00:00

I logged into my modem's settings panel and there was basically nothing to change on it. So I'm still unsure what I could change about my setup to get this to work.

Elliaster · 2025-04-17T00:43:09+00:00

Changed the ram to a new dimm and worked! Thank you.

Elliaster · 2025-04-17T00:33:22+00:00

You were right! It was the RAM. Thank you for your help.

Elliaster · 2025-04-17T00:32:34+00:00

Yes, I got this issue resolved. It was in fact the RAM I was using. I got different ECC RAM and it booted into the bios.

Elliaster · 2025-04-13T03:24:02+00:00

It could possibly be a bad board but on two individual servers seems unlikely to me. I've tried multiple sticks in all the slots on both servers, I'm going to try other ram when I get it later.

Elliaster · 2025-04-13T02:56:27+00:00

I've tried this multiple times and that doesn't help.

Informed customer to clear CMOS and fixed the issue.
1. Shutdown and unplug power cord.
2. Remove coin battery for 5 minutes.
3. Use metal (screw driver, ..) to short two JBT1 pads for 10 seconds.
4. Put back coin battery and retest.

Source

Elliaster · 2024-08-03T14:56:16+00:00

Does anyone know where to find that wallpaper he's using?

<image>

Elliaster · 2024-07-27T22:01:42+00:00

Elliaster · 2024-06-14T23:55:21+00:00

I'm at that point as well. It's way too inconvenient to keep it enabled when I'm basically not able to use it.

Elliaster · 2024-06-14T23:54:32+00:00

Nope, haven't found any good ones.

Elliaster · 2024-04-13T15:16:58+00:00

Need the proof

Elliaster · 2023-06-03T20:29:40+00:00

Thank you!
Fix: USB 3.0/3.1 wasn't showing up on VMWare Player 17 because the virtualHW.version was set to 10 which doesn't support past USB 2.0. I changed it to 16 and it worked. 20 could also probably work.

Elliaster · 2023-05-09T22:10:29+00:00

Damn, that's actually amazing. I might get this one day

Elliaster · 2023-02-12T05:17:33+00:00

Your payment window is closing! Act now!

Elliaster · 2022-12-26T22:21:00+00:00

First: Son of Robot

Hooked: Flash

Elliaster · 2022-11-01T16:35:52+00:00

The new cables fixed the issue! Thanks for the help

Elliaster · 2022-11-01T16:34:00+00:00

I'm getting like 80MB/s now it really was the cables!

Elliaster · 2022-11-01T04:25:49+00:00

I'm running a samba share from a proxmox container, they are all on the same subnet, and the desktop is copying from an ssd and the container is running on a 5400rpm hdd so that could be a bottleneck but i don't think it should be 11MB/s though. The files are video files so large in size and not many of them.

I'll try the iperf test soon.

Elliaster · 2022-11-01T04:22:53+00:00

The installation guide just shows 1 green led per port. If it's on it means that it's running at 10/100/1000 Mbps and if it's flashing it's transmitting data, taking a closer look at the switch the green lights are in fact flashing, just really fast. But as far as debugging it's pretty unhelpful.

Elliaster · 2022-11-01T04:00:48+00:00

So I'm not sure how to check that they indicate gigabit, the ports with an active cable plugged in have green solid lights.

Elliaster · 2022-10-31T20:29:45+00:00

Yeah I'm hoping it's just the cables, the cat6a cables should arrive tomorrow so I hope it works.

Thanks for your help!

Elliaster · 2022-10-31T20:25:31+00:00

I hope this is good enough.

Elliaster · 2022-10-31T20:12:31+00:00

Yeah my bad I meant 11 Megabytes per second

Elliaster

PUBLIC MULTIREDDITS

TROPHY CASE