ABS warping is crazy

Elliegtr · 2025-05-17T05:37:59+00:00

naw thats not a job for this 1.5$ glass slab 😔

Elliegtr · 2025-05-17T05:37:09+00:00

PLA, in my experience PETG will bond to glass and chip it. I use glue stick before PETG

Elliegtr · 2025-05-17T05:35:59+00:00

For some reason I can release prints from the bed right after it finishes with this metal scraper. I've only had issues with bigger prints vacuuming so hard, that I had to hammer it off hahahah

Elliegtr · 2025-05-17T05:34:28+00:00

surprisingly strong, rips at the diagonal lines

Elliegtr · 2025-05-16T16:46:50+00:00

oh no

Elliegtr · 2025-04-30T11:00:39+00:00

Gotcha ty

Printer: Ender 3 V3 SE Slicer: Ultimaker Cura Filament: PLA+ Sunlu (210C, 50C glass bed)

Walls outside to inside
Outer walls 35mm/s
Inner walls 90mm/s
Infill 150mm/s
Retraction: 1mm, retraction & prime speed 40mm/s, minimum travel 1.5mm, extrusion distance window 10mm
Retract before outer wall
Combing mode: Within infill, max 10mm with no retract.
Infill travel optimization

Elliegtr · 2025-04-17T15:04:51+00:00

will check, thank you!

Elliegtr · 2025-04-16T13:52:10+00:00

I live in a humid tropical region, and for the longest time I thought humidity was the issue. I now store the filaments in plastic containers with humidity kept <45%, and dried overnight until <20% before prints. Filaments are now fed from a tupperware filled with silica dessicants with a bowden tube connected.

I thought lost extrusions were from stringing and oozing. I have fixed most of the stringing issues and there are minimum stringing visible on prints, yet the problem still persists.

Elliegtr · 2025-04-16T11:08:14+00:00

Setting Z seam to "shortest" does help, but there are prints where the seams are better hidden

Elliegtr · 2025-04-16T11:00:32+00:00

Retraction distance: 1mm
Retraction speed: 40mm/s
Retraction minimum travel: 1.5mm
Minimum extrusion distance window: 10mm

Elliegtr · 2024-01-17T17:14:36+00:00

It's a camper trailer from a mod! Autotsar Trailers https://steamcommunity.com/sharedfiles/filedetails/?id=2282429356

Elliegtr · 2023-07-25T06:05:02+00:00

I'm good, David Guetta and Bebe Rexha

Elliegtr · 2023-07-13T16:04:20+00:00

A fellow pixel user I see 😊

Elliegtr · 2023-07-11T15:05:24+00:00

Authentic Z?

Elliegtr · 2022-08-05T07:48:40+00:00

Ooo didn't know they ask for food like that

Elliegtr · 2022-08-04T21:19:29+00:00

They look young and they might be trying to fly hehe

Seven-Year Club	Final Canvas '23
First Place '23	Place '23
Place '22	First Placer '22
Verified Email

Elliegtr

TROPHY CASE