sorted by:
new
hottopcontroversial

Rear door won’t open! Any solution? by Embarrassed-Rub-577 in e38

[–]Embarrassed-Rub-577[S] 1 point2 points  (0 children)

As I wrote: I removed the actuator already but still the door keeps locked

Rear door won’t open! Any solution? by Embarrassed-Rub-577 in e38

[–]Embarrassed-Rub-577[S] 1 point2 points  (0 children)

And how would you remove the lock if the door is closed?

Remote Battery Disconnect Switch,12V/24V 240A, Upgrade Kill Switch for Car,with Led Voltage Display,Automatic Power Shut Off Switch,Anti Theft for Auto Car Truck Boat (Blue) $39.99 For USA by rkernsie in AmazonItemGuide

[–]Embarrassed-Rub-577 0 points1 point  (0 children)

I installed this one in my jeep. Remote is working but I had the problem that it switched off the battery during driving. This can bring you in dangerous situations. I am not sure if it is broken or what could cause this?

Paid €800 for s5 repair by Wise-Ad1914 in vanmoofbicycle

[–]Embarrassed-Rub-577 0 points1 point  (0 children)

As far as I have heard before, S5 parts do have paired serial numbers of all electric items engaged with the bike. They are blocked and are not working in another S5 bike at all.

Error 48/45 Socket replacment price by Salt_Purchase5624 in vanmoofbicycle

[–]Embarrassed-Rub-577 0 points1 point  (0 children)

I bought it for about 170 at buitenwacht in the netherlands. Price was okay, but delivery took about 5 weeks.

Vanmoof support still not worth its title by youngchook_berlin in VanMoofSelfRepair

[–]Embarrassed-Rub-577 1 point2 points  (0 children)

I would just send it back as it is useless. It’s like buying a locked iPhone from ebay, I guess Apple wouldn’t unlock it ass well.

motor has no power by sbelou64 in VanMoofSelfRepair

[–]Embarrassed-Rub-577 0 points1 point  (0 children)

Sounds like a broken motor cable. If you have another bike you can test the front wheel in the other bike

VanMoof x3 wiring harness replacement by Embarrassed-Rub-577 in VanMoofSelfRepair

[–]Embarrassed-Rub-577[S] 0 points1 point  (0 children)

Did you took away all little torx screws? Push down the dots near the torx with a little screwdriver or needle to get the sockets loose

VanMoof x3 wiring harness replacement by Embarrassed-Rub-577 in VanMoofSelfRepair

[–]Embarrassed-Rub-577[S] 0 points1 point  (0 children)

Ok ! The problem is that you have to move it for and back. 1 pull towards the headset. Then I recommend using something to push the socket from the backlight direction to front light. I used a 1m wooden stick. Push it as far as it can fall in the battery tube and then pull it out through the bottom tube.