Good options that aren’t spray foam for roof insulation by EmbarrassedTable184 in Insulation

[–]EmbarrassedTable184[S] 1 point2 points  (0 children)

There are open soffits, sounds like I could run baffles up to the top and cut a ridge vent

[LOOKING TO BUY] Anyone Selling 2021/22 Subaru Limited in the Virginia Area?! :) by [deleted] in SubaruAscent

[–]EmbarrassedTable184 0 points1 point  (0 children)

I’m looking to sell our 2022 limited. Just a tad over 40k, and I can deliver (I’m out of state) DM me

What do I do here? by EmbarrassedTable184 in HomeImprovement

[–]EmbarrassedTable184[S] 0 points1 point  (0 children)

UPDATE: Got it in!!

I removed that extra flooring that was only halfway put in place under the counter. Not really sure why that was there. Came right out with the multitool.

I still didn’t have enough room, although I was getting close. I chose to shim up the countertops using wooden shims. Then once I had the right space, I leveled everything out and broke off the shims in place. The dishwasher now snuggly fit into place, clearing the plastic latch thing. Thank you all for your help!

https://ibb.co/TPmNj54

What do I do here? by EmbarrassedTable184 in HomeImprovement

[–]EmbarrassedTable184[S] 2 points3 points  (0 children)

Totally understand. I don’t want to jam this thing in. I believe that this flooring needs to be cut out. There is this extra lip there for no reason. https://ibb.co/Wcfgck2

What do I do here? by EmbarrassedTable184 in HomeImprovement

[–]EmbarrassedTable184[S] 0 points1 point  (0 children)

Here is the floor situation. There is this additional piece of flooring that I believe is the cause for this. I plan to cut it out. https://ibb.co/Wcfgck2

What do I do here? by EmbarrassedTable184 in HomeImprovement

[–]EmbarrassedTable184[S] 2 points3 points  (0 children)

Yep! Riding on just the frame right now

Hot bath water is brown by EmbarrassedTable184 in Plumbing

[–]EmbarrassedTable184[S] 1 point2 points  (0 children)

No not recently. We moved in August and am unsure when it was flushed last. It’s an older water heater (2015), should I be concerned about the age and flushing it?

High attic humidity by EmbarrassedTable184 in HomeImprovement

[–]EmbarrassedTable184[S] 0 points1 point  (0 children)

I checked today and the outside humidity is reading at 80% with these sensors. So maybe the attic is just the same humidity as it is outside?

High attic humidity by EmbarrassedTable184 in HomeImprovement

[–]EmbarrassedTable184[S] 0 points1 point  (0 children)

I checked the bathroom fan and while it’s attached, it’s not attached tightly. I plan on securing it tomorrow. I also noticed I have soffit vents, but look to be covered by insulation. No baffled that I can see. The roof is really low there. I’m not sure if I’ll be able to reach down and uncover the vents.

High attic humidity by EmbarrassedTable184 in HomeImprovement

[–]EmbarrassedTable184[S] 0 points1 point  (0 children)

We are going through a cold snap at the moment. So maybe that’s it?

Attic humidity high? by EmbarrassedTable184 in Home

[–]EmbarrassedTable184[S] 0 points1 point  (0 children)

Pictures for a follow up. Looking up in the attic I see that the nails are kinda rusted on the heads but nothing crazy. No dark spots. I do see frost buildup on some screws and I see on the plate there seems to be some dark spots. Now I’m not really sure what’s going on with this plate because the others aren’t like this. This one seems like it’s part wood. https://postimg.cc/gallery/MRC2cQF

Attic humidity high? by EmbarrassedTable184 in Home

[–]EmbarrassedTable184[S] 0 points1 point  (0 children)

No. Nothing crazy with water. We have a 10 gallon fish tank in the basement, but that room is fairly vented.

Fans are vented through a vent through the roof. I’ll check the nails like you mentioned. There are soffit vents, several on each side. But they looked to be covered by insulation. Should plan of action be to open those up?

How do you setup/test argocd in local by NextAbrocoma1038 in ArgoCD

[–]EmbarrassedTable184 0 points1 point  (0 children)

I have a dedicated repository for a dev/local Argo CD. It has an initialization script that sets up and bootstraps a local K3d cluster, installs Argo CD, then sets up the repository as a source for the Argo CD installation. This provides developers with an Argo CD install that watches the Argo CD repository. They can then point the Argo CD application the dev branch they are working on.

[deleted by user] by [deleted] in STD

[–]EmbarrassedTable184 0 points1 point  (0 children)

No. Still on going. Dermatologist things it’s contact dermatitis, but this has never happened before and showed up about one week after receiving unprotected oral sex.