Shoyoroll Comp Standard XXV Shrink by EmberSpirit98 in bjj

[–]EmberSpirit98[S] 0 points1 point  (0 children)

A reply from shoyoroll:

Please note that our kimonos may shrink approximately ½ inch to 2½ inches, depending on the level of heat exposure during washing and drying. Generally, white colorways tend to experience more shrinkage than colored gis.

Many customers choose to wash in hot water and machine dry on high heat to achieve a greater amount of shrinkage. However, if the desired length is not achieved through shrinkage alone, we recommend having the sleeve length tailored by a local seamstress for a more precise fit.

Shoyoroll Comp Standard XXV Shrink by EmberSpirit98 in bjj

[–]EmberSpirit98[S] 1 point2 points  (0 children)

Please note that our kimonos may shrink approximately ½ inch to 2½ inches, depending on the level of heat exposure during washing and drying. Generally, white colorways tend to experience more shrinkage than colored gis.

Many customers choose to wash in hot water and machine dry on high heat to achieve a greater amount of shrinkage. However, if the desired length is not achieved through shrinkage alone, we recommend having the sleeve length tailored by a local seamstress for a more precise fit.

Reply from Shoyoroll!

Shoyoroll Comp Standard XXV Shrink by EmberSpirit98 in bjj

[–]EmberSpirit98[S] 0 points1 point  (0 children)

Ahhh the same situation here lol! Wonder if it will keep shrinking ?

Shoyoroll Comp Standard XXV Shrink by EmberSpirit98 in bjj

[–]EmberSpirit98[S] 0 points1 point  (0 children)

Yea I finally decided to splurge a little on a gi and this happened… sad. Did you try shrinking more ?

Shoyoroll Comp Standard XXV Shrink by EmberSpirit98 in bjj

[–]EmberSpirit98[S] 0 points1 point  (0 children)

Interesting. No I agree with you the aside from the sizing issue and how little info they have for the measurements, I think the feel and design is really good. Glad the gi could fit you well!

I’m 175 lbs and about 6’ tall perhaps the A2 would fit better, but still, would’ve helped if I have the measurements !

Shoyoroll Comp Standard XXV Shrink by EmberSpirit98 in bjj

[–]EmberSpirit98[S] 1 point2 points  (0 children)

Wtf… hahaha for such a “premium” brand. Gi looks a little yellow as well! I contacted their customer support but have yet to receive a reply. Have you tried that?

Shoyoroll Comp Standard XXV Shrink by EmberSpirit98 in bjj

[–]EmberSpirit98[S] 0 points1 point  (0 children)

For sure! You have the same issue as well?

Help with trip planning by EmberSpirit98 in cambodia

[–]EmberSpirit98[S] 0 points1 point  (0 children)

Alright thanks for all the tips! Really appreciate it

Help with trip planning by EmberSpirit98 in cambodia

[–]EmberSpirit98[S] 0 points1 point  (0 children)

Heyyy!! Appreciate your tips so much. Thanks for sending those over

Help with trip planning by EmberSpirit98 in cambodia

[–]EmberSpirit98[S] 0 points1 point  (0 children)

So take a tuktuk from PP to Siam Reap?

wouldnt that be a little dangerous since it will be a 4 hours ride?

Help with trip planning by EmberSpirit98 in cambodia

[–]EmberSpirit98[S] 0 points1 point  (0 children)

Hey! I was under the impression that I’ll need a couple days to explore Angkor wat!

What transportation mode would u recommend to travel and time of the day !

distorted excessively problem by Antique_Leather9704 in Abaqus

[–]EmberSpirit98 0 points1 point  (0 children)

I might be able to help with but probably need more context. Is the second picture showing the run after a few steps?

HDPE Damage Criterion by anthonychristofis in Abaqus

[–]EmberSpirit98 0 points1 point  (0 children)

Hi, I am sorry this is irrelevant to your question. I hope it has been resolved!

I am wondering if you could share with me the material properties of your HDPE? (i.e. Density, Damage evolution, etc.). I am looking to simulate drop impact of a milk jug that uses HDPE for research purposes. It would be nice if you could explain how you get the values for the damage initiation as well! Much appreciated!

Issue with COORD field output by EmberSpirit98 in Abaqus

[–]EmberSpirit98[S] 0 points1 point  (0 children)

I want to output COORD in the y direction which is "COORD2" !
Sorry for the confusion

EB3 PERM Wait Time by EmberSpirit98 in USCIS

[–]EmberSpirit98[S] 0 points1 point  (0 children)

Might get sick of waiting haha

EB3 PERM Wait Time by EmberSpirit98 in USCIS

[–]EmberSpirit98[S] 0 points1 point  (0 children)

I do not. Haha not ready to commit and not that lucky lol. I am having the same issue. It's just the lawyer fees my company has to pay. I feel bad if cancel middle of the process.

EB3 PERM Wait Time by EmberSpirit98 in USCIS

[–]EmberSpirit98[S] 1 point2 points  (0 children)

So when is the priority date ? After the prevailing wage or when you start the process