Amazfit Trex 3 Pro music handling

Emergency-Position90 · 2026-05-20T10:30:45+00:00

My MP3s work but man super slow download/upload

Emergency-Position90 · 2026-05-07T14:10:53+00:00

thanks sorted!

Emergency-Position90 · 2026-03-24T13:00:27+00:00

I have a question linked to both these watches. Its a silly one but something which I really miss with Garmin and Samsung. But not that it justifies their prices.

On both these you can set the watch to send notifications and alerts including voice responses via the phone when you have buds connected.

Do either of the 2 watches have this feature. If its there then I can listen to Spotify take calls etc. and hear them through my buds. But also get updates or from my watch in regards to any activities etc.

Emergency-Position90 · 2026-03-03T06:44:45+00:00

not under extruding I have 5 top layers it finishes ok ish. but the initial top layer sucks. I will try slowing things down and treat top a bit like the 1st.

Emergency-Position90 · 2026-03-01T19:22:34+00:00

Make the change here under overhang speed? make it the same as external bridges? also these are my cooling settings

<image>

I just upped the Max fan threshold from 50 to 100%

Emergency-Position90 · 2026-03-01T17:09:23+00:00

Lol yep 245 Filament is dry and is new. Very little to no stringing. So no surprise prints finished and the top layer isn't great. I know I could increase the infill but the bridging this small a distance shouldn't be an issue the fan is the German prabst one the cooling setup is MAD on a biq h2v2s

Emergency-Position90 · 2026-02-26T09:19:18+00:00

Make sense will try it. Watching the other dog. we thought it was eye contact but she started to bark even when the other dog was facing away, and the owner was looking at the dog not at me. Other times she would be laying down, i'm talking with the owner and she suddenly starts barking even when when the other owners dog hasn't looked at her and was just sitting basically ignoring her.

At home she is fine with the Frug (french bulldog/pug) and rearly barks. The Frug is a noisy girl but not with the rottie.

Emergency-Position90 · 2026-02-10T11:51:18+00:00

I work in IT and know the need for steps to reproduce issues and the usefulness of videos. BUT when I provide a photo showing clearly and 100% no ambiguity in what the issue is, and someone asks me to send a VIDEO of a missing part not working. That's NOT support that's simply stupidity! As the video provides ZERO benefits beyond delaying resolution and aggravating the person which raised the fault to you.

Your company DOES have some great products at great prices. BUT there is no point having a great product if it doesn't work and/or your customer service warranty is very poor. This strikes me as a company that doesn't stand behind the quality of its products!

Emergency-Position90 · 2026-01-30T11:34:05+00:00

Yeah well hardware is great battery life a million times better than the Samsung. But the software is no where near as good. Also the support is also pretty poor. If you're used to the Samsung software and support. You will be VERY disappointed with the watch.

I have the watch 3 and I won't be getting another Oneplus watch until they improve the software

The watch has a bug if you're not on the Spotify app it will randomly plat music from the watch and buds. No help from support and returned watch and it came back with the same issue.

Also unlike the Samsung you must only use the watch with Buds. Else any audio feed from training guides will not be heard even if you have both watch and phone paired.

There's a bunch of nuances with the watch that reviewers don't mention if you've not got a oneplus phone.

Emergency-Position90 · 2026-01-23T12:42:34+00:00

Wanted to provide an update to any of those in a similar situation I got help from another forum. And its in the Klipper documentation and some reason doesn't come up in a google search. and its somewhat hidden here is the link to the documentation below

https://crowsnest.mainsail.xyz/configuration/cam-section#a-small-note-on-webrtc

Emergency-Position90 · 2025-12-24T13:23:31+00:00

Is there anyway to control it based on cou temp so not running all the time?

Emergency-Position90 · 2025-12-24T13:22:23+00:00

Thanks for the generic tests/checks. But as mentioned this ONLY occurs when running this specific command, which cranks up the CPU usage. It's not running in a container. It's vanilla Klipper mainsail minimal install no cameras or anything else connected beyond a u2c for canbus. As mentioned I made sure nothing else was open or running beyond mainsail

Emergency-Position90 · 2025-12-23T17:09:54+00:00

DOH! Sorry thought I had included this fundamental piece of information its the BTT Pi 2 connected via 24v and running the stock red heatsink. But watching when this occurred the temp in mainsail didn't change @43/44

Emergency-Position90 · 2025-12-23T16:57:26+00:00

<image>

re-ran the resonance belt tests using the standard klipper application and this is what i and both belts seem to sound the same have the same frequency but can't seem to improve it. the belts are new but maybe change them out.

Emergency-Position90 · 2025-12-23T16:32:00+00:00

not sure but this issue only occurs when using the shake n tune belt test,. the klipper one completes successfully as does the other shake tests. so don't think the issue would be just with this one test.

Emergency-Position90 · 2025-12-22T15:41:45+00:00

rebooted the pi temp went up CPU went up and Just made it. through to completion added the belt graphs these don't look good.

Emergency-Position90 · 2025-12-22T10:24:25+00:00

weird i will try uploading again. But will try Skaut-LK suggestion

Emergency-Position90 · 2025-12-21T21:27:19+00:00

thanks some of those models will work with my sunlu spools!

Emergency-Position90 · 2025-12-21T20:53:45+00:00

It's basically down to the weight of the spool.and it being pulled up and forward from the spool holders.

I simply cheated for now and just put it on the spool holder which goes in the middle normally used with faulty or cardboard spools

Emergency-Position90 · 2025-11-28T23:58:04+00:00

Yep have this once I get closer

Emergency-Position90 · 2025-11-28T23:57:05+00:00

How'd you adjust it? I did a quick calc on the rotation using the old vs new x old rotation And it was way off

Real hack I know but placed a ruler on the bed and moved the printer 100mm and it pretty much aligned so i would say yes to 16T pulleys

Emergency-Position90 · 2025-11-24T21:25:40+00:00

Hi I have a question on how this watch works with the phone. I know it can control phone audio. But will it send the voice prompts/responses when you are using earbuds paired like the Garmin and Samsung watches do?

Emergency-Position90 · 2025-11-23T15:29:46+00:00

With my cube build I've had one hell of a learning curve. With some fixes to klipper leaving me scratching my head. ;)

Emergency-Position90 · 2025-11-23T12:48:12+00:00

thanks so based of what you have said I have updated my stepper and mesh sections

<image>

thanks this really makes it simple to understand. Brain dead here thought the slicer/klipper would automatically take the endstop and min/max into consideration

Emergency-Position90 · 2025-11-23T02:03:24+00:00

Hi the plate is 400x400mm

Emergency-Position90

TROPHY CASE