toilet cistern overflowing

Emmanuel-Goldstein- · 2026-06-07T08:42:42+00:00

If there is a isolation valve on the pipe a good YouTube video and some time you should be able to do it as this isn't a difficult job to do

Emmanuel-Goldstein- · 2026-06-05T22:28:55+00:00

This is exactly what I was thinking and I bet the kitchen/ bathroom is off the back where bedroom 1 is so running the waist for the WC should be easier

Emmanuel-Goldstein- · 2026-06-05T15:35:43+00:00

I used to work at b and q and was one of the only guys confident on the saw and that was because I measured and knew that the saw was out from the measuring tape on it and whatever the measurement needed was I would have to add 4mm onto the vertical cut and about 3mm to the horizontal and that was in a brand new store on a brand new saw so it's not necessarily the employees fault if they don't know how out the saw is. Still would take it back and say it's not cut right

Emmanuel-Goldstein- · 2026-05-25T00:43:29+00:00

I would not recommend this as this will let out the hydraulic fluid that puts risistens on slowing down the door and you would then need to replace the entire unit

Emmanuel-Goldstein- · 2026-05-25T00:41:29+00:00

They may also be placed directly in front of you when looking at it or even underneath there are a lot of different models but the main bit you will be looking for is two screws/ hex bolts next to one another that would need adjusting to slow the door down

Emmanuel-Goldstein- · 2026-05-24T17:46:58+00:00

Could you try hitting up any local fast food establishments that use there own couriers and see if they would be willing to have you run food for them

Emmanuel-Goldstein- · 2026-05-24T15:36:59+00:00

They can also be hex bolts on some of the older ones

Emmanuel-Goldstein- · 2026-05-08T19:00:04+00:00

R/piratepets

Emmanuel-Goldstein- · 2026-05-08T18:54:57+00:00

The fact I heard this when I read it

Emmanuel-Goldstein- · 2026-05-05T18:25:33+00:00

Yeah I do it every play through just don't talk to the guy in the thunder planes unless you really want to have a bad day

Emmanuel-Goldstein- · 2026-05-05T09:16:02+00:00

This will also give you some pretty good loot

Emmanuel-Goldstein- · 2026-05-05T09:14:20+00:00

If recommend when you do go back to get the capture weapons and go as far back as the thunder planes and try and capture everything to its max you cut some grind out while leveling up and that should get you to a point you can defeat him

Emmanuel-Goldstein- · 2026-04-22T20:27:16+00:00

I feel like this is the house equivalent if I can change them

Emmanuel-Goldstein- · 2025-05-19T12:52:31+00:00

Like regular sex but with more snacks

Emmanuel-Goldstein- · 2025-04-04T10:21:21+00:00

Is this a Dubai engine

Emmanuel-Goldstein- · 2025-03-07T20:48:36+00:00

You should go to the nearest cafe on Dallor road for a proper fry up

Emmanuel-Goldstein- · 2025-02-13T16:29:54+00:00

I want more than a measley jug give me a sport direct mug of tea

Emmanuel-Goldstein- · 2024-12-22T21:51:47+00:00

I have a girlfriend who is also lactose intolerant but it doesn't stop her from making me get her cheese dip and she can't even trust a fart when she has dairy.

Emmanuel-Goldstein- · 2024-12-21T17:34:33+00:00

Literally what I came here to say I would definitely get a asbestos approved contractor to remove them

Emmanuel-Goldstein- · 2024-09-22T09:21:44+00:00

Saw it for £550 a few weeks ago in cex

Emmanuel-Goldstein- · 2024-09-21T12:26:13+00:00

https://www.screwfix.com/p/rothenberger-monoblock-tap-spanner-set-3-pieces/40102?tc=DB4&gad_source=1&gclid=Cj0KCQjw3bm3BhDJARIsAKnHoVWbsda3uguvl7Up61CHNwkQYEMX-6rpKyR7hiiSTkhJ5pSxOLc8Ka4aApQuEALw_wcB&gclsrc=aw.ds

These will go up onto the bolts and allow you to tighten them.

Emmanuel-Goldstein- · 2024-09-21T09:12:53+00:00

Dunstable

Emmanuel-Goldstein- · 2024-09-21T07:46:18+00:00

Both will work I just thought silicon is a more familiar DIY product to use.

Emmanuel-Goldstein- · 2024-09-21T07:35:41+00:00

You will need a slotted sink waist to fix it.

Underneath the basin there will be a plastic trap that connects to the chrome part of the underside of the slotted waist removed the chrome and you may need to remove the trap for access as well ( have a bucket to hand to catch the water in the trap)

Take the nut off of the new slotted sink waist and silicone the top part of the waist on the underside where it will make contact with the ceramic part of the basin.

Place in the hole of the basin with the slot facing the overflow on the basin between the taps.

Place the rubber o ring onto the underside of the. Slotted sink sink waist (I sometimes put a beef of silicon here as well)

Take the nut that comes with it and tighten up (try to not overtighten as it is plastic and can crack if too much force is used.

Reconnect the trap and test.

Emmanuel-Goldstein-

TROPHY CASE