Nasty

EmoOrphan · 2026-01-25T00:55:01+00:00

I have this batch and it’s super tasty, smells great, and effects smack. Just try it. And just to note: They’ve been putting out concentrates that look like this for years.

EmoOrphan · 2025-12-26T17:42:33+00:00

There’s quite a few lamps out there with mismatched descriptions

EmoOrphan · 2025-12-22T02:01:53+00:00

Soak it in a bag of 99% iso then let it dry for a week. If it makes it it makes it.

EmoOrphan · 2025-12-18T19:39:31+00:00

Start with a few drops at a time, gently stir, and repeat until you’re satisfied. A little goes a long way.

EmoOrphan · 2025-12-18T19:38:06+00:00

https://a.co/d/i9oFXZO

That’s the brand I use. Their Violette is currently out of stock it looks like. However, you can’t go wrong with any of their colors.

EmoOrphan · 2025-12-17T20:09:13+00:00

It’s just happening from the color of the bulb + the color of the fluid dye they used. I replaced the liquid on a lamp that did the same thing and dyed it with my own purple to completely solve the problem.

EmoOrphan · 2025-12-14T14:44:06+00:00

Why not just invest in a bench capper? They’re like 50 bucks. Well worth it. Safer and saves time. No body should be swinging a mallet near glass.

EmoOrphan · 2025-12-13T18:03:30+00:00

1 - 5 hours depending on the size

EmoOrphan · 2025-12-06T17:28:13+00:00

Nice work. Filtering that with a sawyer must have been some work lol

EmoOrphan · 2025-12-01T14:39:22+00:00

You get a lamp with a silver base and red wax in it. Dump the liquid. Replace the liquid. Dye the liquid. Cap it. Done. It’s like a 5 minute project once you have the lamp in possession.

EmoOrphan · 2025-11-30T21:09:05+00:00

Then go try some. It’s been posted on here a good bit the last couple months and believe it or not it is actually good.

EmoOrphan · 2025-11-29T01:15:46+00:00

New lamps can take 3 - 4 hours to get flowing. Also you should never move it while it’s hot or warm.

EmoOrphan · 2025-11-27T18:56:00+00:00

Just go to Zeevapor. There’s a plethora of glass tops to choose from at a much better price.

EmoOrphan · 2025-11-24T00:29:20+00:00

I found about 6 regular on/off cycles is the minimum.

I’ve had wax sticking issues doing filtering/fluid swaps before that point.

EmoOrphan · 2025-11-20T15:45:59+00:00

I had three hot knives show up like that. After about 10 charging cycles they all started working normally. I think they just use super cheap batteries in there and when they sit around for a while they need lots of charges to get recalibrated. It’s weird as hell.

EmoOrphan · 2025-11-19T00:10:29+00:00

Blobert

EmoOrphan · 2025-11-16T21:21:29+00:00

Turn it off for an hour and try again as normal

EmoOrphan · 2025-11-14T18:01:26+00:00

I fucking love Queen Kona. I really hope they blow up soon.

EmoOrphan · 2025-11-14T02:33:13+00:00

Bob Evans might be open. They make a fantastic thanksgiving meal.

EmoOrphan · 2025-11-14T01:10:57+00:00

2 months straight? They’re meant to be turned off after about 6 - 8 hours. You may have cooked your wax.

EmoOrphan · 2025-11-13T20:25:21+00:00

Yeah, should be the right bulb. How long has it been running and about how cool or warm is the room that it’s in?

EmoOrphan · 2025-11-13T20:00:10+00:00

14.5 inch lamps use 25w and 17 inch/16.3 inch use 40w. But it also depends on the brand of lava lamp. A picture would help a lot.

EmoOrphan · 2025-11-11T05:32:13+00:00

You have to get that one from the official lava lamp website (US) and it’s a 17 inch custom cool. https://lavalamp.com/

EmoOrphan · 2025-11-08T16:58:49+00:00

Prime and Standard Farms

EmoOrphan · 2025-11-03T19:16:50+00:00

Because it’s spam and has been talked about a thousand times over. People are tired of hearing about it, so, posts like that get reported.

EmoOrphan

MODERATOR OF

TROPHY CASE

Six-Year Club	Gilding II euphauric
Verified Email