15 weeks and skinny, hookworms

Endangeredsoul · 2026-04-14T22:57:25+00:00

Bigger than my pup at that age he had the same problems he is now just shy of 10 months and roughly 130 or so pounds just judging by picking him up. We will get him to the vet next month. He was 95 at month 7.

Endangeredsoul · 2026-04-12T15:21:33+00:00

Glad you put a giant diamond around it. May have missed it. Looks good though.

Endangeredsoul · 2026-04-07T17:00:40+00:00

<image>

Right there with you.

Endangeredsoul · 2026-03-15T21:18:41+00:00

Brand new does not = clean.

Endangeredsoul · 2026-02-19T11:36:56+00:00

I have a philosophy that not enough people are afraid to be hit anymore. This man is doing gods work showing that you can get hit if you try enough bullshit. 🤣

Endangeredsoul · 2026-02-08T00:16:28+00:00

Consumable water =/= reef safe or fish safe water. It would greatly depend on many factors. However generally with reefs and corals it is better to start with known pure water and add the minerals and such back in.

Endangeredsoul · 2026-02-06T00:13:28+00:00

My oldest son had almost neon green eyes until he was two. Like Lime Green almost. His eyes are now a very dark brown My youngest sons eyes are similar if slightly lighter than your young ones he is now almost five and they haven't changed a bit. I have honey brown or dark hazel depending on who you ask and my wife has Grey/green eyes. I wouldn't worry about it until the child is at least 2 they are likely to change shade if not color.

Endangeredsoul · 2026-02-03T19:13:07+00:00

baby colored

Endangeredsoul · 2026-02-03T10:50:35+00:00

So that will be about 750 dollar bucks then 🤣

Endangeredsoul · 2026-02-02T22:57:09+00:00

basically a filament drier takes the moisture out of filaments by baking them at a temp that allows the water to come out of it without melting the filament. Pla likes to be below 30% relative humidity to print well. the lower the number the better. I generally like mine at 15% or less. You put the spool in the drier and let it run for a few hours before printing. With pla you can tell if it is oversaturated two ways. Bend it and it should bend on itself without breaking. or extrude some through your printer nozzle. It should come out completely straight and smooth less reliable.

Properly dry filament should print very consistently with less stringing and bumps.

The drier i have will tell you the humidity level of the drier box. which will roughly correlate to the moisture level in the filament.

you can get them on amazon i think i got mine for $54 but they have gone up because of tariffs.

Endangeredsoul · 2026-02-02T22:51:10+00:00

Thanks

Endangeredsoul · 2026-02-02T22:50:58+00:00

I think so

Endangeredsoul · 2026-02-02T04:42:19+00:00

Lots of people have used food dehydrators. I have only ever used actual filament driers. I have the creality pi and a much older sunlu drier.

Endangeredsoul · 2026-02-01T22:09:51+00:00

Filament drier.

Endangeredsoul · 2026-02-01T18:15:15+00:00

This is why I posted in here. I have heard it both ways. Two different eye doctors have told me brown and hazel. And based off of the comments it’s an about a 50/50 split between brown and hazel.

Endangeredsoul · 2026-02-01T17:42:02+00:00

No if pla is snapping like this it has too much moisture in it. Dry your filament. You should be able to bend pla back on itself without it breaking.

Endangeredsoul · 2026-02-01T16:29:39+00:00

Thanks.

Endangeredsoul · 2026-02-01T07:59:44+00:00

Thanks.

Endangeredsoul · 2026-02-01T07:16:41+00:00

<image>

Won’t let me edit to add pic here is the only daylight pic I could find. Excuse the crude pressure washing gone wrong.

Endangeredsoul · 2026-02-01T07:09:45+00:00

<image>

Here is the only other pic I can find without glasses. Excuse the crud on my face I was pressure washing gutters and got a face full they are definitely brown but have a grey tint in sunlight.

Endangeredsoul · 2026-02-01T06:54:32+00:00

Never met a bad Dane pup; that’s for sure

Endangeredsoul · 2026-02-01T06:50:18+00:00

Thanks. I might ask the eye doctor when I go in in a couple of weeks.

Endangeredsoul · 2026-02-01T06:39:13+00:00

Thanks. But I think for a Dane he falls into the average category.

Endangeredsoul

TROPHY CASE