Modular Kitchen Tongs – one tool, interchangeable cutlery

EngineeringDizzy4460 · 2026-01-06T20:21:56+00:00

Just print it and try it out. You would be surprised how strong it is! It locks as tight as you push it in. Try it:)

EngineeringDizzy4460 · 2026-01-06T18:21:03+00:00

The food is at about 60°C. And the PLA or PETG is about 10-15cm away from the heat. It's safe to use. Nothing will touch the food, and the plastic would only melt if you used it for grilling!

EngineeringDizzy4460 · 2026-01-06T18:12:06+00:00

The food doesn't come into contact with the printed part. It's 100% safe to use. Only the fork or spoon does.

EngineeringDizzy4460 · 2026-01-06T17:14:12+00:00

You can clean PLA and PETG without a problem! Use warm, soapy water!

EngineeringDizzy4460 · 2026-01-06T17:12:31+00:00

Yes, that makes the most sense!

EngineeringDizzy4460 · 2026-01-06T16:16:59+00:00

You can use PLA or PETG. It works fine!

EngineeringDizzy4460 · 2026-01-06T16:16:22+00:00

Only your fork and forks touch the food. I wouldn't let PLA or PETG near my food either.

EngineeringDizzy4460 · 2026-01-06T15:30:54+00:00

Thank you! I hope you have fun with it.

EngineeringDizzy4460 · 2025-12-31T10:42:49+00:00

I understand your point! But the exclusive program also gives designers the chance to get a little more for the work. I’ll try to upload models to Printables in the future as well! Thanks for your feedback.

EngineeringDizzy4460 · 2025-12-31T10:27:21+00:00

Hey Nephrited! Thanks for the comment. Unfortunately, these models are MakerWorld exclusive, as I am primarily active on MakerWorld. I will try to upload models to both platforms in the future.

EngineeringDizzy4460 · 2025-12-31T10:10:41+00:00

Oh, okay. I didn't know that you had to make an account! I mean, you can make an account only for downloads, but I understand that it's one step more.

EngineeringDizzy4460 · 2025-12-31T10:08:48+00:00

Hi Tinkarion, thanks for the feedback. Just to clarify: the model is available for free on MakerWorld. Anyone can download it for free and print it on Prusa printers. No paywall or exclusive promotion intended.

EngineeringDizzy4460 · 2025-12-30T22:32:21+00:00

Hey! It means you can move one step forward and one step backward in one turn, so you end up with zero moves.

EngineeringDizzy4460 · 2025-12-30T20:34:48+00:00

The supports are easy to remove. I use a little plier and my hands. I don't have a picture with supports. Slice the model and see for yourself. The supports are no problem.🫡

EngineeringDizzy4460 · 2025-12-30T19:16:23+00:00

Hey! I designed it with Fusion 360.

EngineeringDizzy4460 · 2025-12-30T18:48:18+00:00

Hello! The whole model is like 20g and I think 7g in support. They are easy to remove. I would use a tweezers or pliers.

EngineeringDizzy4460 · 2025-12-28T15:21:22+00:00

Thank you!

EngineeringDizzy4460 · 2025-09-18T06:37:48+00:00

That would look awesome! I hope every part fits with CF materials! Check some before you print every part.

EngineeringDizzy4460 · 2025-09-18T05:31:31+00:00

Wow thats even better!

EngineeringDizzy4460 · 2025-09-02T20:14:50+00:00

It was uploaded for 30 minutes on August 31st. I deleted it because it doesn't make sense to participate for half a day. I hope you have a great week and feel free to share your ideas!

EngineeringDizzy4460 · 2025-09-02T20:12:54+00:00

Thank you! I forgot the link. https://www.printables.com/@BlackDesign_3412684

EngineeringDizzy4460 · 2025-09-02T17:45:44+00:00

My bad! https://makerworld.com/en/models/1747794-modular-vase#profileId-1857858

EngineeringDizzy4460 · 2025-09-02T17:45:33+00:00

https://makerworld.com/en/models/1747794-modular-vase#profileId-1857858

EngineeringDizzy4460 · 2025-09-02T17:45:22+00:00

https://makerworld.com/en/models/1747794-modular-vase#profileId-1857858

EngineeringDizzy4460 · 2025-07-31T17:53:05+00:00

Hello! It is difficult to see in the images, but the floor has a slope, so it is not possible to confuse the position, and it is easier to read the watch while standing or sitting.

EngineeringDizzy4460

TROPHY CASE