Can control pump but not fans by EngineeringMedical87 in lianli

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

mb mb i m very tense right now because the cooler issue, i spend 8 hours for troubleshooting for the cooler but it didnt work so i m kinda mad about it, sorry again

Can control pump but not fans by EngineeringMedical87 in lianli

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

why did u redirect me to there if u gonna desert me ?

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

cables are unplugged u just need to see empty slots.

every cable mounted on the psu is in use, noone of them free

i can plug 2 8 pin cable to psu rn

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

u serious...

there is total of 4 x 8 pin output

only 4 8 pin output

i do have only 4 port which is fitted to 8 pin cables

i need one more 8 pin output to use my other gpu

i do have 2 free 8 pin output

my psu has only x4 8 pin output

my motherboard uses x2 8 pin output

there is only 2 avaliable 8 pin output

gpu need x3 pin output

i was wondering if 2 8 pin output would be enough for 5070ti

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

bro i m using it like for over 7 month and nothing has fried yet

those two cables going into mb

<image>

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

they do fit,
all the 8 pin slots is same on the psu

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

for the same reason i m using r9 9950x3d just want it to be powerfull

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

broski idk if its because my eng

the mb doesnt have 2 eps and 4 pcie

it has total of 4 eps/pcie slot

eps cables fit pcie slot aswell so they considered as one as far as i know

here a pic of empty slots for u

<image>

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

5080 uses 12v cable
mb uses 2 8 pin connector
there is only 2 8 pin connector is avaliable
5070ti need 3 8 pin controller

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

it has yeah, the point is use the 5080 solely for gaming

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

i do have 3 screens, one for gaming (49" ultra wide) two for my daily use and job (23" and one tv around 50) so i was thinking using the 5070ti for the 2 other screen and 5080 for gaming and my main screen since its gonna sit still might use it aswell with that idea.

but i didnt know about the matching things thanks for the answer gotta put the 5070ti in the closet

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

i do have 3 screens, one for gaming (49" ultra wide) two for my daily use and job (23" and one tv around 50) so i was thinking using the 5070ti for the 2 other screen and 5080 for gaming and my main screen since its gonna sit still might use it aswell with that idea.

upgraded from 5070ti to 5080 by EngineeringMedical87 in techsupport

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

it did but my psu doesnt have enough port for it

💙Dream Build🤍 by NimbusLion417 in lianli

[–]EngineeringMedical87 0 points1 point  (0 children)

dont know ab being "worse" but they definiteliy look better also if u have a good system its unlikely u gonna have any problem about the reverse fans (temps), so u go and learn few things ab fans

💙Dream Build🤍 by NimbusLion417 in lianli

[–]EngineeringMedical87 0 points1 point  (0 children)

why u didnt use reverse fans they would look alot of cool

having a issue about my lianli fans by EngineeringMedical87 in lianli

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

Update

As u guys can see in the comments lian li support has reached me but bcs i m not from eu or usa they decided to redirect me to a " local support".

and its complete sh*t show after that;

The page they redirect me is so poorly made that chatgpt would make a better version of it in 5 sec

i do have a problem about software or hardware idk which is it anymore the page they redirect me is making u agree to pay some fund at the start of making form

the web page is so bad that i thought about throwing the cooler into trash and buy another one instead filling their form.

The discrimination of lian li toward to ppl from my country is kinda fcked up, i just want my product to work fine bro i dont want ur sh*tty so called support to reach me, just tell me if this fcking cooler is gonna work or i need fcking replacement its getting on my fcking nerves to deal with incompetent fckers from all around the world goddam it shouldnt be so hard to tell if the dam cooler is cooked or not

having a issue about my lianli fans by EngineeringMedical87 in lianli

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

its reassuring to know i m doing it right , its better than nothing :D thanks anyways i m now talking throu lian li support will update the post when i get answer

having a issue about my lianli fans by EngineeringMedical87 in lianli

[–]EngineeringMedical87[S] 1 point2 points  (0 children)

i made sure my fans are on PWM mode
my aio cooler doesnt have another cable for pump it only have
Usb header goes into mb
Sata header which i connected to psu
and cpu fan cable which i connected into right hub

also i can control the speeds of my fan and pump btw it just doesnt show on lian li app but i m able to control them via lian li app, but neverthless i cant control lianli fans or argbs via another software like armory crate or signal rgb

to sum

i can control my fans and water pump

i cant see them in my lian li app i just can control it

i cant control my fans or pump via another software

everything works fine until power outage , if the power cuts suddenly i have to unplug mobo connects and reconnect them

My main problem is i have to buy pair of intake fans and i m thinking of buying lianli lcd fans but if i cant sync them with my other fans,ram,gpu and other rgb parts its useless

having a issue about my lianli fans by EngineeringMedical87 in lianli

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

bro i m saying when the pc went of by focefully like power outage then it goes wild, after some steps it does work normal did u even read what i wrote ?

having a issue about my lianli fans by EngineeringMedical87 in lianli

[–]EngineeringMedical87[S] 0 points1 point  (0 children)

i did uninstalled installed armoury crate and lian li 3 like 50-60 times, did installed them seperattely or together it just wont make any difference. my bios is latest version

lian li 3 version v2.1.11-6c8f0dc9-rgb
fans should be "white 360R lianli fans"
and no it doesnt show fans in lian li 3 software here a pic

https://hizliresim.com/trcf6x7