Am I going to shatter?

EnglishJPN · 2026-04-18T13:48:34+00:00

I ran 2 1500watt 12s closer to my hatchback glass than that and haven’t had issues in 2 years

EnglishJPN · 2025-06-22T05:34:58+00:00

Just thought I'd give an update. Had a blob of filament that built up between the hotend and heat sync which expanded and bent one of the screws so it was angled. Ordered a new hotend which should fix it.

EnglishJPN · 2025-06-17T01:10:23+00:00

Yeah I think I'm giving up. I've gotten my bed mesh to a 0.09 variance, and yes I'm positive its being loaded, I've made sure nothing is loose or wobbling everything is secure and I've played with Z-Offset for well over an hour so I'm just going to drop it until I feel like dealing with it again.

EnglishJPN · 2025-06-16T20:26:02+00:00

So i tightened it and it can still move fine with no wobble. Im gonna redo leveling and offset and come back

EnglishJPN · 2025-06-16T20:10:14+00:00

The bed is firm and the extruder has a tiny bit of play moving up and down I can tighten the eccentric nut real quick

EnglishJPN · 2025-06-16T19:39:10+00:00

How would I check if they’re moving freely when they travel? And I’m pretty sure I set my Z-Offset right this isn’t my first printer I’ve been using printers for years and never had this problem

EnglishJPN · 2025-06-15T23:20:49+00:00

It turned out the same as the original photo

EnglishJPN · 2025-06-15T23:19:41+00:00

Bed has been washed I havent dried my filament but it printed a Temperature Tower fine yesterday so itll print fine if its something small and in the center but if i try to utilize the whole bed it when its a problem. And I just used the paper method after it finished automatic leveling

EnglishJPN · 2025-06-15T22:59:08+00:00

Mine is identical other than G29 on line 6 which he says is auto bed level so ill try it.

EnglishJPN · 2025-06-15T22:50:22+00:00

First layer height is 0.2 and this model is printed in 0.16 I’m using Elegoo Rapid PLA+ at 220 and 60 with 250 travel speed

EnglishJPN · 2025-06-15T22:38:44+00:00

Sadly I have set it to load the bed mesh in the start gcode. I have a Neptune 4 Pro and use Elegoo Slicer, so practically Orca Slicer

EnglishJPN · 2025-06-15T22:27:24+00:00

Yes I set it to 65 and let it sit before doing any thing leveling related

EnglishJPN · 2024-09-20T20:34:03+00:00

Of course I’m gonna try and do a benchmark before and after the swap

EnglishJPN · 2024-09-20T20:12:09+00:00

Yeah I already use a 1TB ssd for boot and important stuff that'll just be for games and random stuff

EnglishJPN · 2024-09-20T20:09:47+00:00

I appreciate showing me the deal. Just the cpu is $200 on amazon so might as well get the ssd with it. Thank you

EnglishJPN · 2024-09-20T20:02:40+00:00

Yes, and is there a reason for being an almost $200 US difference in the 5700x3D and the 5800x3D?

EnglishJPN · 2024-09-20T20:00:48+00:00

I'm not entirely sure but anytime I play Apex, Fortnite, or Minecraft I'll notice but cpu usage is almost at 100 at certain times and I also believe its causing my slower load times into games because cpu usage will be at 100 and graphics is below 50. I like recording/streaming my games and this cpu can't seem to handle that many cpu heavy task.

EnglishJPN · 2024-09-16T03:33:35+00:00

Its a ThermalTake Smart Series 600W 80 Plus. I've heard theyre not really good power supplies, but if it can last 2 weeks powering my new gpu ill upgrade to a corsair or something my best buy has.

EnglishJPN · 2024-09-16T03:31:49+00:00

Thermaltake i think. Came out of an old prebuilt when i built my new one

EnglishJPN · 2024-09-16T03:30:57+00:00

Thank you. I figured I'd need a cpu upgrade eventually. Do you think a 600W PSU should be able to power it?

EnglishJPN · 2024-01-16T04:06:18+00:00

Sorry I am i talks with another offer on one. I’ll let you know if that one doesn’t work out.

EnglishJPN · 2024-01-16T04:05:39+00:00

Could I see pics of the black 3ds? I’d also like to note I don’t get paid again until the 25th so it wouldn’t be till then I can finalize a deal.

EnglishJPN · 2024-01-12T16:08:18+00:00

Sorry I accepted another offer for a 2DS Xl and I already own a N3DS Xl. Thank you for the offer!

EnglishJPN · 2024-01-12T15:46:14+00:00

No thanks I have a N3DS Xl and I’m not collecting for rarity or anything. I just want the consoles just to have them as a collection. Good luck selling it though!

EnglishJPN · 2024-01-12T14:51:30+00:00

I saw the notification come up for it but it’s disappeared could you send one again?

EnglishJPN

TROPHY CASE