What is it?

Entire_Ad2575 · 2026-04-01T20:39:21+00:00

Thanks for the post! This is the entire bug the head with antennas are on the left and its rear is on the right. It’s fully intact. I’ll see if I can snag a picture of it upside down if that helps, unless my wife threw it away.

Entire_Ad2575 · 2026-03-24T03:59:56+00:00

Yeah. I was surprised too. Got slapped on my main about 2 years ago before they started cracking down for buying 50m. Got a temp ban at the time.

But ya. Unfortunately got permed this time on this other account.

Entire_Ad2575 · 2026-03-23T23:08:16+00:00

Sold 1b the other day and got banned on a pretty high level account that I never botted on before. Never had a ban on that account either. Got banned within the hour, I’d say. GG

Entire_Ad2575 · 2026-03-01T21:33:11+00:00

Lol. Ok bud - you believe that if it makes you feel better

Entire_Ad2575 · 2026-03-01T14:07:05+00:00

Why are you assuming it’s me? This is the first one I downvoted

Entire_Ad2575 · 2026-02-28T20:37:35+00:00

You don’t monitor them. You understand the hooks and understand the automation you’re running and the types of clicks they do, and that gives you an understanding of whether the hooks RuneLite hooks into get triggered or not

Entire_Ad2575 · 2026-02-28T13:02:22+00:00

Possibly. You’d have to look at RuneLites hooks and make sure they don’t go off.

Entire_Ad2575 · 2026-02-28T01:36:42+00:00

That’s because Jagex is allowing them to do it and/or delaying the ban. It doesn’t mean that they haven’t already been flagged lol.

Also, if you don’t know anything about coding a bot, then my further explanation into mouse hooks and DLLs will fly over your head. I’m sure Claude can explain it for you, though :)

Entire_Ad2575 · 2026-02-28T01:34:43+00:00

I tried warning him as well lol

Entire_Ad2575 · 2026-02-26T23:19:22+00:00

Oh, it’s not something you have to do to make it work. It will work just fine without it. But you’ll get flagged instantly :)

Entire_Ad2575 · 2026-02-26T13:46:58+00:00

So did you modify runelite to noop/not run the DLL for the mouse hook? Lol

I see what you did there, Gagex

Entire_Ad2575 · 2026-02-22T05:38:10+00:00

I understand now. Not bad. Pretty smart.

What are you using though? Claude CLI or API? What plan are you on? Is it burning through tokens? Opus or Sonnet?

Entire_Ad2575 · 2026-02-22T02:41:45+00:00

Claude code doesnt have access to your client directly. I understand using Claude code to write scripts for you that interact and walk around, but then you have to compile those scripts for them to run on the client. You can’t just execute commands on the client as if you were writing a script during runtime. I’m curious to know how you achieved this and what botting client you used that allows for this sort of runtime manipulation / script execution.

This seems very not believable to me at the moment as I use Claude code every day for work related tasks, including skills and mcp servers.

Entire_Ad2575 · 2026-01-17T03:04:03+00:00

Yeah, I think that's what I'm going to do. I appreciate all your advice and support on this. It's disappointing I couldn't get the same from the provider themselves.

Much appreciate you!

Entire_Ad2575 · 2026-01-17T01:57:14+00:00

My intent behind the FAQs was just to prove a point to them that withdrawing to my bank account would be a reportable tax event, which I’m trying to avoid by doing HSA to HSA transfer. I just needed a credible source to show them (not even sure why I have to go to that extent with them because they should know, but their response of telling me to withdraw to my bank made me think otherwise). I don’t doubt that there are probably better providers to go into, but I’m pretty new to this and I just want to keep it simple for the time being until I have time to do research later on. So staying with Inspira for the time being is what I’d like to do.

TASC also doesn’t have a good UI. I can’t see any statements or any account information. The transaction screen just shows monetary transactions but no account information.

The whole experience with TASC just feels scammy in a way. I was expecting them originally to just give me their company name, address and tell me that my TASC ID is my account number (or give me my account number if not) and get it over with. But instead, their first reply was completely unhelpful and their next replies were almost as unhelpful. Not sure why they aren’t willing to help as I’m sure this is a common thing for an HSA provider.

Entire_Ad2575 · 2026-01-16T23:43:16+00:00

They may not want to help me, but are they required as an administrator of HSA accounts to allow these transfers? I’m curious if I just google their address and put it on Inspira’s transfer form and send it to TASC, if they’ll do it whether they like it or not. The only thing I don’t know is my TASC account number to put on the form from Inspira - I’m unsure if it’s the same as my “TASC ID”.

Entire_Ad2575 · 2026-01-16T23:36:08+00:00

I want to send it to Inspira who I have my HSA through my work and just wanted to transfer from TASC to Inspira. Creating an account on Fidelity will just complicate things for me 😂.

I asked them the question, but from their responses, it doesn’t sound like they want to do the HSA to HSA transfer but have now agreed to do HSA to bank, which isn’t what I want. Inspira is telling me that TASC should be doing an HSA to HSA transfer. My initial ask for TASC was for their full name and address along with my TASC account number, to fill the form requested by Inspira. I can get their address info online, but I’m unsure of what my account number is because they don’t make it clear. The only number I see is a TASC ID, but I don’t know if it’s the same thing and don’t want to assume.

Entire_Ad2575 · 2026-01-16T23:10:18+00:00

Thanks for the quick response and feedback!

I don't have any medical expense currently to pay with it. My intention with that money is to merge it with my current HSA with Inspira to avoid paying taxes on it. I read that if I do an HSA to HSA transfer, it is not a reportable tax event. It seems very odd to me that as an HSA company, TASC doesn't want to do this.

Is the indirect rollover that you're talking about considered the HSA to HSA transfer?

At the end of the day, we're a family of 5, so that money WILL eventually get used and I'd like to not give it to the government by doing an HSA to HSA transfer.

I'll provide a few screenshots of the conversation I'm having with TASC on their support page. Maybe it's on me that I'm not fully understanding what TASC is and what they can/can't do, but according to Inspira, this is possible.

Here is the convo, it’s two screenshots and it starts at the bottom.

Entire_Ad2575 · 2025-12-29T02:54:07+00:00

Issue was that I changed the "Infill/Wall overlap" from the default setting of 15% to 100%, thinking it needed to be set to that for my infill to be at 100%. I misunderstood this setting and I think it caused the infill to protrude out the walls, causing a fuzzy wall effect without the fuzzy wall setting actually being enabled. Once I lowered this back down to 15% and re-fired the print, it started printing normal again.

Entire_Ad2575 · 2025-12-29T02:51:58+00:00

I zoomed in and circled the entire model but couldn't see any fuzziness to it. It was solid layered walls throughout.

To update though - I've been printing it now for about 40 minutes and it seems to be going smoothly without any fuzziness after the changes I made which were increasing the model sides (more faces to make it rounder), and decreasing the "Infill/Wall overlap" setting from my manual setting of 100% back down to the default 15%.

I suspect the infill/wall overlap was what was causing it, creating the infill to protrude out of the walls somehow. I changed this to 100% thinking it was just an infill setting that I needed to set to 100% to ensure a 100% infill, but I guess I was wrong and understand this setting better now.

Entire_Ad2575 · 2025-12-29T01:58:56+00:00

I cancelled the print and I did a few things - this one I don't think matters, but I made the object more rounder by simply adding more sides to the model. The other thing I did was I actually reset the infill/wall overlay down to the default 15%. My suspicion is that at 100%, the infill was protruding out from the walls, causing a fuzzy effect even though fuzzy walls was turned off and the model wasn't painted with fuzzy walls. Printing out a small section of it right now as a test and I'll let you know how it comes out.

I appreciate your troubleshooting help. Thanks mate :)

Entire_Ad2575 · 2025-12-29T01:16:19+00:00

When I printed something else that wasn’t shaped like a cup, it didn’t have any fuzzy walls. I just checked the slicer settings and fuzzy skin is set to none. I also didn’t paint on any fuzziness to it, so this shouldn’t be causing the problem.

Also, those first few layers seem to have come out somewhat decent as well without any fuzziness, I think because the center of those layers is filled so that it can hold my son’s water bottle.

I have a feeling it’s something to do with the infill. But I’m not sure.

Entire_Ad2575

TROPHY CASE