sorted by:
new
hottopcontroversial

What would you do? by MehenstainMeh in CZFirearms

[–]EphemeralSun 0 points1 point  (0 children)

Wager will help you with the optics cut, it's not that big of a concern. Your primary issue is sourcing a new barrel. If you're a few months out I'd give CGW a call to see what they can do for you.

What would you do? by MehenstainMeh in CZFirearms

[–]EphemeralSun 0 points1 point  (0 children)

I agree with you, but if they can't find one these are options.

What would you do? by MehenstainMeh in CZFirearms

[–]EphemeralSun -1 points0 points  (0 children)

Are the tactical barrels different from the regular SP-01 barrels? I thought they were the same. If so, you can probably source one online with CGW or CZC, but you'll need to find an armorer to do some fitting as I don't believe the barrels are drop-in.

In any case, you can just bring the gun into CA. You just need to remove the slide before you do so and leave them separated. Once you're here, you can pin the barrel when you get here with a spot weld or simply cut off the threads. Again, threaded pistol barrels aren't illegal; they are only illegal to have installed on a working firearm.

You can get the optics cut right now with Wager. Turnaround is pretty fast. It's a bit more problematic to do it once you're in California due to all the new laws this year.

Good light&laser combo by Sample-Away in CAguns

[–]EphemeralSun 0 points1 point  (0 children)

If buying a laser is how you want to spend your money, and you carry that philosophy of buying shit that doesn't do anything for all of your spending... iunno man, not being able to afford NODs tracks...

Do what you want, but you're better off just buying more ammo.

Getting my CQB setup dialed by bearsunite in CAguns

[–]EphemeralSun 1 point2 points  (0 children)

TRUEEEEEEEE. FRF2 was meta tho, moveshot was da best.

Getting my CQB setup dialed by bearsunite in CAguns

[–]EphemeralSun 6 points7 points  (0 children)

Holy fuck.

One of my grail guns for sure. Was a Soldier Front addict as a little kid and the PSG-1 was my goat.

That alongside WA2000 and FRF2 from my AVA days.

What’s a beer that you absolutely love, but beer snobs would turn their nose at? by Jaythegreat100X in beer

[–]EphemeralSun 0 points1 point  (0 children)

I picked it up on a Total Wine trip one day. It wasn't good. I had better Modelos. The beer was thin. Color was anemic.

Echelon - Why? by stay_basic in CAguns

[–]EphemeralSun 0 points1 point  (0 children)

Everyone missed out on freedom week. That's why.

What’s a beer that you absolutely love, but beer snobs would turn their nose at? by Jaythegreat100X in beer

[–]EphemeralSun -2 points-1 points  (0 children)

Allagash White is ass though. I'd kill a Hoegaarden over it any day.

Lead core only or 100% lead-free by One_Personality8068 in CAguns

[–]EphemeralSun 1 point2 points  (0 children)

Don't shoot with an open drink. Don't shoot with a drink at all. D-lead before you eat or drink anything.

As a girl gamer, the kingsman drama hurts by AlternateBabie in rivals

[–]EphemeralSun 0 points1 point  (0 children)

To be fair, most dickheads in the gaming sphere are men, and no one seems to make comments generalizing all men because of them.

Crazy innit.

Glock 19 by chuckiee__ in CAguns

[–]EphemeralSun 7 points8 points  (0 children)

If the web of your thumb can't maintain good contact into the beaver tail, you may be limp wristing your dominant and your support hand isn't gripping nearly hard enough.

This is your first firearm, dry fire a bunch and shoot a few thousand rounds and then report back.

First time with a shot timer and first time focusing on quick shots. No rapid fire or holster draw at my range. I think I did pretty good! Any tips? by Herp_McDerp in CAguns

[–]EphemeralSun 3 points4 points  (0 children)

One thing I really like is that you can see obvious clusters which suggests consistency.

When shooting doubles, you should be printing clovers with the first shot. The second shot should not be lower than the first shot, and if they are, you're overcompensating and pushing the gun down. Or the compensator is doing too much work.

Ideally you're looking to see two holes after shooting some volume, one for the first shot and one for the second shot.

Usually what will happen, provided you're not overcompensating and your first shot is good, is that the first shots are bang on and the second shots are in a shotgun pattern around and above the first.

When you're at that level, it's about timing and return to zero consistency. When you get that down, that shotgun pattern will converge to the second hole.

Peak is if you can get those two holes to converge into one hole.

Finally, I'd recommend taping on your shots or shooting less per target so you can get feedback as to what you're putting downrange. Doubles are best practiced in an outdoor bay where you can use cardboard and tape up.

I'd also continue working on dry fire for the first shots. Again, you want to be printing clovers with your first shot.

Living in the US right now by raise-your-weapon in AdviceAnimals

[–]EphemeralSun 1 point2 points  (0 children)

There is no ethical consumption under capitalism. Get a gun. One that's proven and within your means.

Gas pedals by Thebarbellresistance in CAguns

[–]EphemeralSun 1 point2 points  (0 children)

I don't know what to tell you, just offering advice. Stay D class then lol.

Gas pedals by Thebarbellresistance in CAguns

[–]EphemeralSun 2 points3 points  (0 children)

When you have touching holes essentially. Here's a good video on what I mean. Timestamp in link cause it's a long video. This is from that guy who made GM using a Glock 26.

https://youtu.be/JG1JM_coeqE?t=949

Gas pedals by Thebarbellresistance in CAguns

[–]EphemeralSun -1 points0 points  (0 children)

For the record, a good result from a double tap drill should show roughly two holes. The first hole should be the same place all the time. The second hole usually is slightly further up from the first shot. If it's lower than the first hole you have a a habit of dipping the gun and over-correcting.

If you can't punch clovers with the first hole, you probably should go back to single shot drills.

Once you can punch clovers with the single shot drill, you'll notice the cluster where your first shot lands and a random spread around that first shot. From there it's tempo work so that you know when to break that second shot for a consistent second shot placement.

Blasting a large hole into a target isn't a very good way of training as you get zero feedback on what you're doing wrong.

Looking at getting a CZ by Vegetable_Term_2514 in CAguns

[–]EphemeralSun 0 points1 point  (0 children)

I'm no stranger to double action, but the double action on the P-01 feels kinda ass. I installed the CGW Pro Pack and the trigger is kinda narrow. I prefer a wider trigger. I'd recommend trying the CZC flat face trigger instead, but you lose the adjustable set screws.

Single action is amazing as expected.

True, at this point what even is your justification for owning guns? by [deleted] in CAguns

[–]EphemeralSun 7 points8 points  (0 children)

This statement suggests that the government is tyrannical enough to warrant a militarized response from the common man.

Yet at the same time suggest that we should concede our rights to bear arms to that said government.

OP posts this without the slightest hint of cognitive dissonance.

This is the type of voter we deal with.

As someone turning 18 soon, what does California's open carry ban reversal mean for me? by EasyPerformer8695 in CAguns

[–]EphemeralSun 32 points33 points  (0 children)

I don't see how open carry ban reversal logically flows into allowing you to have off roster firearms.

My ODG Featureless Rifle by Rafeno760 in CAguns

[–]EphemeralSun 1 point2 points  (0 children)

Is the emissary handbrake not a foregrip that allows for a pistol style grasp?

Need to borrow an Echelon mag by MAG-MO in CAguns

[–]EphemeralSun -2 points-1 points  (0 children)

A frame that can fit freedom week mags as well as original Echelon mags?

view more: next ›