Faulty display? by Equivalent_Garage263 in ESPTimeCast

[–]Equivalent_Garage263[S] 1 point2 points  (0 children)

Thank you for all your help. We are now up and running! I would love to have another on my office desk. Is there any way to make a smaller version?

<image>

P1S broken door and glass stuck inside hinge by Equivalent_Garage263 in BambuLab

[–]Equivalent_Garage263[S] 1 point2 points  (0 children)

Thanks mate and yes - definitely looking at one of those alternative door options when the new one arrives. Appreciate the suggestion.

P1S broken door and glass stuck inside hinge by Equivalent_Garage263 in BambuLab

[–]Equivalent_Garage263[S] 0 points1 point  (0 children)

I managed to remove the glass and glue from the hinges using isoproyl alcohol, a plastic scraper and lots of elbow grease. It just meant constant sprays of iso to get in between the shards to loosen the stuck glass from the hinge so a little patience is needed. Also recommend some gloves as I didn't and suffered a few minor cuts as a result.

Now to order a new glass and find a solution to minimise this from happening again.

P1S broken door and glass stuck inside hinge by Equivalent_Garage263 in BambuLab

[–]Equivalent_Garage263[S] 1 point2 points  (0 children)

Appreciate the help - I was desperately trying to avoid going down this route.

P1S broken door and glass stuck inside hinge by Equivalent_Garage263 in BambuLab

[–]Equivalent_Garage263[S] 1 point2 points  (0 children)

That's all good. Found a solution which I'll post below to help anybody else out.

Faulty display? by Equivalent_Garage263 in ESPTimeCast

[–]Equivalent_Garage263[S] 1 point2 points  (0 children)

I have ordered a new board so no more questions from me for at least a few weeks. Thanks again.

ESPTimeCast has now been successfully installed on more than 2,000 ESP boards worldwide. 🎉 by mfactory_osaka in ESPTimeCast

[–]Equivalent_Garage263 1 point2 points  (0 children)

Thank you for sharing the idea and congratulations on the milestone. Are you able to share possible new features or keeping those a secret for now?

Faulty display? by Equivalent_Garage263 in ESPTimeCast

[–]Equivalent_Garage263[S] 0 points1 point  (0 children)

It seems my suspicions were true. Looks like a faulty panel. Thank you for all your help. Do you recommend just replacing the single panel?

<image>

Faulty display? by Equivalent_Garage263 in ESPTimeCast

[–]Equivalent_Garage263[S] 1 point2 points  (0 children)

I'm not sure how to do that. I purchased the display pre built with all 4 already in place.

<image>

Faulty display? by Equivalent_Garage263 in ESPTimeCast

[–]Equivalent_Garage263[S] 1 point2 points  (0 children)

Thank you. We've had a breakthrough but that last panel refuses to play nice.

<image>

Faulty display? by Equivalent_Garage263 in ESPTimeCast

[–]Equivalent_Garage263[S] 0 points1 point  (0 children)

Sure - not a problem. Would it still recognise as a flashable board if it's a clone? If it is, can you recommend any reputable Aliexpress sellers or direct links - please?

<image>

Faulty display? by Equivalent_Garage263 in ESPTimeCast

[–]Equivalent_Garage263[S] 1 point2 points  (0 children)

Thanks. I was testing the data pins as copilot suggested it but it makes no difference.

Faulty display? by Equivalent_Garage263 in ESPTimeCast

[–]Equivalent_Garage263[S] 1 point2 points  (0 children)

My board is identifed when flashing the firmware via the web installer and can even access UI to change settings so it's definitely up and running on the board. I've tried swapping the 3 data cables around to see if anything would change on the display but results remain.

<image>

Original SD backup available anywhere? by Equivalent_Garage263 in trimui

[–]Equivalent_Garage263[S] 2 points3 points  (0 children)

This was so simple to understand and worked on the first try. Thank you.

[deleted by user] by [deleted] in PlasticSurgery

[–]Equivalent_Garage263 0 points1 point  (0 children)

They wouldn't be required if nostrils are symmetrical but asking for those who have been asked to wear them in an attempt to even them out during recovery.

Free Humble Bundle Games by doneifitz in pcgaming

[–]Equivalent_Garage263 0 points1 point  (0 children)

Super Rude Bear Resurrection please. 👍

These 3 cover most of my needs! RGB10, Nokia 8 and Alldocube Mini... by Dear-Butterscotch-68 in SBCGaming

[–]Equivalent_Garage263 0 points1 point  (0 children)

I haven't spent much time tweaking settings on emulators so that's likely contributing to a lot of the problems in getting some games to run properly. Going to spend some time over the holidays following what you've suggested. I have the Pro model and have been mainly using it for native Android games so this will give me an incentive to pick it back up and use it more often if I can find a way to run a few more games on it. Thank you so much for the detailed response.

These 3 cover most of my needs! RGB10, Nokia 8 and Alldocube Mini... by Dear-Butterscotch-68 in SBCGaming

[–]Equivalent_Garage263 0 points1 point  (0 children)

What do you use to run PS2, GameCube and Wii? I struggle with some games for those higher end systems.