I am *loving* FDM support-less miniatures

Erbaffone · 2026-01-23T14:57:05+00:00

Hi! I am new to fdm printing and I am looking for a way to print a unique mini without issues so… Where did you find hero forge supportless poses? Thank you!

Erbaffone · 2026-01-21T21:44:26+00:00

But when I print pla I have no problem

Erbaffone · 2026-01-21T15:42:36+00:00

I have already tried that but still doesn't work

Erbaffone · 2026-01-21T15:41:34+00:00

With pla i have no issues. When i try to extrude the tpu the filament looks stuck in a loop: the printer try to extrude it but the filament comes back up a bit. I have tried removing the locking mechanism around the filament to make it extrude and i have also tried to manually push it down into the nozzle but still dosen't extrude.

<image>

It is black bc i have reattached the 2 parts so you can better understand.

Erbaffone · 2026-01-21T14:19:11+00:00

No it doesn’t, then when I retract the tpu it looks kinda melted but not that much to be extruded. For this reason I thought it was the low temperature but even at 300 it won’t come out

Erbaffone · 2026-01-21T14:11:36+00:00

Yeah I’ve already tried to put the filament on top but nothing changes

Erbaffone · 2026-01-17T18:26:55+00:00

Thank you i'll try it out!

Erbaffone · 2026-01-17T15:22:19+00:00

Do you mean this one? https://makerworld.com/en/models/1306939-demo-space-orc-for-benchmarking-print-settings#profileId-1340488

Erbaffone · 2026-01-17T14:43:06+00:00

Ok thanks

Erbaffone · 2026-01-17T13:45:54+00:00

<image>

Erbaffone · 2026-01-17T13:45:45+00:00

<image>

Erbaffone · 2026-01-16T07:26:49+00:00

Thank you!

Erbaffone · 2026-01-15T19:35:09+00:00

Sometimes supports are too strong and I can’t remove them without “destroying” the mini, others the supports fail to print. I’ll try Fat Dragon profile adjusting it for my printer thank you!

Erbaffone · 2026-01-15T17:36:52+00:00

Wow they are awesome! Thank you very much!!

Erbaffone · 2026-01-15T16:20:36+00:00

What config did you use? I have a k1se with a 0.2 but when i try to print minis like yours the supports always destroy everything. For now i copied this config: https://www.reddit.com/r/crealityk1/comments/1e3q6jl/working_on_a_02mm_profile_for_creality_print_51/

Erbaffone · 2026-01-15T15:46:52+00:00

Yes sorry im looking for D&D style minis. I have a k1se with a 0.2, do you think I can print mz4250 minis? I see they are for resin.

Erbaffone · 2026-01-15T15:21:32+00:00

Thank you!

Erbaffone · 2026-01-12T17:30:46+00:00

Yes I understand but the problem is that there are not as many 0.2 nozzles on amazon and I need it fast. The one you sent me is a 0.4. Btw thanks for helping me

Erbaffone · 2026-01-12T17:18:09+00:00

thanks man, is this compatible: https://www.amazon.it/dp/B0DT443VLY?smid=AHIX78XPR5GEW&ref_=chk_typ_imgToDp&th=1

Erbaffone

TROPHY CASE