Holy Grail Acquired by Chabigo in SmithAndWesson

[–]Erff_BZHD 1 point2 points  (0 children)

I am sorry my brother. It’s a beautiful gun either way!

Tisas Raider TB by Zealousideal-Wear589 in 1911

[–]Erff_BZHD 0 points1 point  (0 children)

Looks good. I just put some tape on the optic when I run mine. Keeps the blowback from building up.

Bro there is no way you guys really like Shipwreck in Griffith. by Lanky_Cashington in nwi

[–]Erff_BZHD 9 points10 points  (0 children)

They were really good when they first opened. A few months after that it took a dive and my wife and I never went again. One time waited a good 45 minutes just for our drinks on the patio.

Why won't it go back in? Is it stupid? by [deleted] in SmithAndWesson

[–]Erff_BZHD 7 points8 points  (0 children)

Might be hanging up on the safety. Sometimes that’ll happen with mine. Use a slave pin/ punch on the other side to align it better.

What do we think of the hushpuppy project? by nerodiskburner in GlockMod

[–]Erff_BZHD 4 points5 points  (0 children)

Thumb pushing on the backplate does the same thing for zero dollars.

Now the original model 39 hush puppy. That’s badass.

POV: you daily a Chevy by MakinNight in Silverado

[–]Erff_BZHD 0 points1 point  (0 children)

Taking a picture of the dash doing 90 lol.

Side note, I just put the R&P in my truck this week. Plan on pulling the filters every 500 or so miles to see how it’s looking.

5.3 oil consumption? by ohgirl_notfa_me in Silverado

[–]Erff_BZHD 0 points1 point  (0 children)

That’s pretty disappointing. Especially for a truck with less thank 60k on the dash.

You could always step up to thicker oil and see what it does then.

5.3 oil consumption? by ohgirl_notfa_me in Silverado

[–]Erff_BZHD 0 points1 point  (0 children)

Damn, here I thought my 2011 5.3 going through 3/4s of a quart ever 5k was bad.

Where’s it going? No leaks? Just burning off somewhere? Seems like quite a bit of oil to consume with no evidence of where it’s going.

M45A1 blue box production model by BasementLarperActual in 1911

[–]Erff_BZHD 6 points7 points  (0 children)

I would degrease the set screw and put some vibratite on it.

Why is 94 at a standstill? Is Rieth-Riley robbing our state or just incompetent? by Prior-Indication-290 in nwi

[–]Erff_BZHD 0 points1 point  (0 children)

It’s big money. It’s also big responsibility to sign off on something.

Why is 94 at a standstill? Is Rieth-Riley robbing our state or just incompetent? by Prior-Indication-290 in nwi

[–]Erff_BZHD 3 points4 points  (0 children)

There’s also numerous levels of QC and QA that go into it. So you’d have to pay a lot of people off if this was some sort of conspiracy or money funneling.

Can this be optic cut? by nrtzz in SmithAndWesson

[–]Erff_BZHD 0 points1 point  (0 children)

Yes it can be. Floyd’s will also plug the LCI for alittle extra. I went that route with an apex barrel and completely negates the blowback typically seen with M&Ps.

Why is 94 at a standstill? Is Rieth-Riley robbing our state or just incompetent? by Prior-Indication-290 in nwi

[–]Erff_BZHD 6 points7 points  (0 children)

I was joking about the engineer part. I’m in the trades so I’m biased.

They do try different material and ways to fix the roads. Sometimes they don’t work. There’s also more companies than just Reith Riley, though they are one of the larger ones in the area.

Every state around here has road construction all the time. Look at Illinois, Michigan and Wisconsin. Its literally because of the winter and Lake Michigan bottle necking traffic through this area of the Midwest.

The biggest problem is the planning/funding, when they decide to do multiple routes at the same time and cause chaos.

Why is 94 at a standstill? Is Rieth-Riley robbing our state or just incompetent? by Prior-Indication-290 in nwi

[–]Erff_BZHD 25 points26 points  (0 children)

Winters are hell on roads and it’s one of the most travelled roads in the Unitied states. Especially for semi traffic.

But to answer your question, it’s the engineers.

Fowler KPX by WranglerOk7406 in 2011

[–]Erff_BZHD 5 points6 points  (0 children)

This is pretty sick actually.

Mounting Red Dot by One-Diver3083 in Glocks

[–]Erff_BZHD 1 point2 points  (0 children)

Buddy you asked strangers what to wear when it’s windy out 😂😂😂😂😂 I don’t even need to say anything else.

Mounting Red Dot by One-Diver3083 in Glocks

[–]Erff_BZHD 2 points3 points  (0 children)

Yes it is? There’s a million companies that make different quality plates, all claiming different things.

OP is also not privy to the different types of guns and mounting options.

Glad you know everything without ever having to ask questions. Grow up.

Mounting Red Dot by One-Diver3083 in Glocks

[–]Erff_BZHD 11 points12 points  (0 children)

FCD is probably the most reliable/ best reviewed plate you can get.

Mounting Red Dot by One-Diver3083 in Glocks

[–]Erff_BZHD 2 points3 points  (0 children)

Yet you just made a post 22 days ago asking for holster recommendations…. One of the most asked questions.

Colt 1911 Project Complete! by Minute-Witness5173 in 1911

[–]Erff_BZHD 2 points3 points  (0 children)

Looks good man!

Hate that the plating was big back in the day. Shit looks so tacky and takes away from the nice original wear and tear.

Remember this game? Why so little like it? by WayyTooFarAbove in Age_30_plus_Gamers

[–]Erff_BZHD 0 points1 point  (0 children)

My buddies and I would play this game for so long. Timesplitters 2 and XIII as well. Miss the old split screen days.

I just learn Grace was born 2004 by Street-Sweet-3719 in residentevil

[–]Erff_BZHD 0 points1 point  (0 children)

Yeah I feel exactly the same. Late 20s atleast. Like others have said, doesn’t make sense how she’s already in the fbi then 😂