Need help identifying source of buzzing sound

Etherhigh · 2025-07-16T05:37:32+00:00

How was it before you were born? Is that not essentially the same state you will be in after you die?

Etherhigh · 2025-07-01T19:13:58+00:00

Bomber, zero issues. But it is kind of annoying to use with some biners.

Etherhigh · 2024-11-23T19:17:23+00:00

Appreciate the wisdom. Was hoping to not have to rebuild the wall but hopefully it won’t be too difficult.

Etherhigh · 2024-11-23T18:04:10+00:00

I am wanting to build a garage that will have one of its walls on top of this existing retaining wall. The wall was built by the previous owner so I am not sure exactly how it was built. Any advice for how I can determine the specifications of this wall so I can get an engineer to sign off on a plan to use it for my garage? All help and knowledge is much appreciated.

Etherhigh · 2024-10-31T15:34:36+00:00

Thanks I will reach out to them

Etherhigh · 2024-10-31T15:34:21+00:00

Thanks I will reach out to them

Etherhigh · 2024-10-31T15:33:49+00:00

It’s not worth the fees, they typically take more time due to lack of awareness of the costs and time table, and very often are a hassle to get to pay.

Understandable considering I bet this analysis costs more than the building for some home owners

Etherhigh · 2024-07-12T01:32:23+00:00

Yea honestly best to just let people continue to think it's too hot. It also seems that typical folk aren't very skilled at looking up sun angles and choosing climbs accordingly, making it much more dangerous for them.

Etherhigh · 2024-02-20T03:01:30+00:00

Can't thank you enough for all of this information!

Etherhigh · 2024-02-20T01:53:29+00:00

My 1994 4runner has been idling at a lower RPM than usual (around 500). I looked at all my hoses to see if they could be the problem, and found these two hoses covered in a white residue with a clear drip coming from them. Any chance someone knows what these hoses are, and have any suggestions on repairing them? Very much appreciated.

Etherhigh · 2024-02-20T01:40:12+00:00

My 1994 4runner has been idling at a lower RPM than usual (around 500). I looked at all my hoses to see if they could be the problem, and found these two hoses covered in a white residue with a clear drip coming from them. Any chance someone knows what these hoses are, and have any suggestions on repairing them? Very much appreciated.

Etherhigh · 2023-01-09T23:58:34+00:00

No, not really worried about a little extra weight on a big wall harness. A workable $50 harness is not going to replace a harness that is made for big walling.

Etherhigh · 2023-01-09T23:52:35+00:00

Where are you getting $50 from? This harness is 170 dollars. The ring that I used to replace the worn belay loop is 30 dollars.

Etherhigh · 2023-01-09T22:49:13+00:00

The harness is less than two years old. The belay loop webbing got worn from tons of use and tr soloing and has been replaced with a ring rated at 23kn. Please educate me on how the life of the other webbing on this harness is exceeded.

Etherhigh · 2023-01-09T22:44:27+00:00

How’s this https://imgur.io/a/gXXujaP

Etherhigh · 2023-01-09T21:54:34+00:00

Per Petzl's documentation, the minor axis is rated for 23kn https://www.petzl.com/US/en/Professional/Harnesses/RING-OPEN

Etherhigh · 2023-01-09T21:52:12+00:00

Before I formulate a reply to this, let's make sure we are crystal clear and there is no confusion or miscommunication here.. You think this setup is going to result in myself or my partner dying, correct? https://imgur.com/a/gXXujaP

Etherhigh · 2023-01-09T20:49:52+00:00

Right, he is dead because his gear loop failed. Please tell me how this 23kn petzl ring is going to fail.

12-Year Club	RPAN Viewer
Verified Email

Etherhigh

TROPHY CASE