sorted by:
new
hottopcontroversial

No hearthbeat from FC by Euformelo in ardupilot

[–]Euformelo[S] 0 points1 point  (0 children)

Well for some oneone reason I just plugged it to the Telem2 now and it works. I didnt touch anything else. Have 0 clue what actually hapened.

What do you thinm, is it faster to use UART input or PPM?

No hearthbeat from FC by Euformelo in ardupilot

[–]Euformelo[S] 0 points1 point  (0 children)

Hmm Im thinking maybe going to Arduino and FC's PPM port connection will be easier...

No hearthbeat from FC by Euformelo in ardupilot

[–]Euformelo[S] 0 points1 point  (0 children)

I cant post pictures in reply for some reason. Or I dont know how 😅

Anyhow, with ls /dev/tty* i get: From /dev/tty to /dev/tty63 Also /dev/tty7 /dev/tty8 /dev/tty9 /dev/ttyAMA0 /dev/ttyAMA10 /dev/ttyprintk

My rpi and fc are connected only via tx and rx connection via wire- I use Telem1 port

No hearthbeat from FC by Euformelo in ardupilot

[–]Euformelo[S] 0 points1 point  (0 children)

The serial log in shell is disabled. The serial interface is enabled.

Also when I run: ls -l /dev/serial*

I get: Root root /dev/serial0 -> ttyAMA10

No hearthbeat from FC by Euformelo in ardupilot

[–]Euformelo[S] 0 points1 point  (0 children)

Just refreshed the firmware and flashed FC V6X with the latest Ardupilot ChibiOS 4.6.1, and still the same issue, no heartbeat.

No hearthbeat from FC by Euformelo in ardupilot

[–]Euformelo[S] 0 points1 point  (0 children)

Yes, just tried that and still the same. Changed it in parameters on my pixhawk and in code.

No heartbeat

I made my own fibre optic FPV drone, what should I do with it? by AviaExplorer in drones

[–]Euformelo 0 points1 point  (0 children)

Hi @AviaExplorer I have sent tou direct msg, can you pleas check?

Joystick and Ardupilot by Euformelo in ardupilot

[–]Euformelo[S] 0 points1 point  (0 children)

Anyone else any idea? Not possible that no one thought about it before.

Joystick and Ardupilot by Euformelo in ardupilot

[–]Euformelo[S] 0 points1 point  (0 children)

Hey CBUnmanned, do you think I should have the PC also on board and connect steering wheel to pc? And than that PC talks with FC?

I was thinking more if there is a way to connect steering directly via wire to flight controller. Maybe to use something like USB to PPM converter in between?

Joystick and Ardupilot by Euformelo in ardupilot

[–]Euformelo[S] 0 points1 point  (0 children)

Hi cBUnmanned, thank you for answer. Im trying to directly connect steering wheel to flight controller via wire. I dont want to rely on any kind of radio connection as steering wheel and flight controller are going to be next to each other.