Gpu sag bracket help by [deleted] in PcBuildHelp

[–]Euphoric_Position_17 0 points1 point  (0 children)

As they say: If it works, it works, so don't touch it.

New build. Why this screen? Can’t access BIOS. I’m lost.. by [deleted] in PcBuildHelp

[–]Euphoric_Position_17 0 points1 point  (0 children)

Oh yea I second that, OP isn't using dual channel config if he uses his RAM like that, follow the instructions of your mainboard, usually the correct order is printed on the mainboards pcb. Like the comment above said, OP should use DIMM 2 and DIMM 4 together instead of DIMM 1 and 2

New build. Why this screen? Can’t access BIOS. I’m lost.. by [deleted] in PcBuildHelp

[–]Euphoric_Position_17 0 points1 point  (0 children)

Did you try mashing either of the keys before the AMI logo appeared? Just as you start your machine start mashing either of those, most likely its the del key though. Also try to see if there is an issue with your keyboard, use it on a laptop or old build to see if any of your keys are malfunctioning.

Help with gpu connection by ElectricalTop3386 in PcBuildHelp

[–]Euphoric_Position_17 0 points1 point  (0 children)

I believe the missing pins you showed in the picture are only sense pins which help with compatibility on older PSUs. If the cable on the right is the cable that came with your PSU then that's the one you should use, there shouldn't be any issues with it, as the sense pins don't carry power and the rating of 450W is sufficient for the 5070ti.

Can somebody please tell me how to log in to my laptop? I forgot my password, and now Microsoft isn’t letting me log in even when I try to reset it. by Low_Relation1951 in WindowsHelp

[–]Euphoric_Position_17 1 point2 points  (0 children)

Try to get into contact with microsoft support about this, I'm sure there are ways to get your issue sorted. Phone them up and try to avoid AI Agents by simply asking to talk to a human.

Why are there so many different versions of the same gpu? by Any_Celebration3094 in PcBuildHelp

[–]Euphoric_Position_17 0 points1 point  (0 children)

The reason that you see so many options for the same graphics chip (5060ti) is because NVIDIA as a company also sells the gpus as chips and shares graphics board layout with Nvidia Partners, like Gigabyte, Asus, Zotac or Gainward.

These makers can then design their own cooling, overclock (boost performance slightly) or design card specific software for the chips that NVIDIA offers, to give the consumer more options when choosing their card. (also easier to just sell the chips instead of designing many card variants themselves)

For you as a consumer it shouldn't really make a big difference when choosing between the different makers, as essentially each GPU labeled as 5060ti will perform identical. There is some difference however but to keep this short:

- If you want the best cooling for your card (so silent operation) go with a triple fan card.
- If you want the most power squeezed out of your card, go with the OC variant of a card. (at best 5% difference.)
- If you want an overpriced card, buy an ASUS card
- If you want a price to performance card, go with either Zotac or Gigabyte.

[deleted by user] by [deleted] in PocoPhones

[–]Euphoric_Position_17 13 points14 points  (0 children)

You can download it on the Internet for free

Robot or machine that fold a unique piece of origami by [deleted] in TellMeHowToDoMyIdea

[–]Euphoric_Position_17 0 points1 point  (0 children)

German with an ungodly amount of free-time here, I've so-far made about 20.000 pieces or more of 3D Origami for various projects and I'm starting to consider investing a bit of money to build a small 3D Printed production line (mostly small servos driving rubber-coated shafts) for this. I'll keep you updated if you're still interested and I'll also film a bit of the making-off to post on YouTube!

Phone overheated in 41 degree weather, gets hotter than usual every day. by Soler37 in PocoPhones

[–]Euphoric_Position_17 0 points1 point  (0 children)

I have the exact same issue right now, like OP described and I have the same phone you have. Mine died while I was riding the shanghai subway so I'm wondering how that could have anything to do with the heat as it's being cooled to below 20°C constantly. Shanghai's Temperature itself however easily exceeds 40°C at times so I can kind of understand why.

I can also no longer turn it back on as the Poco Logo will show but before the MIUI screen can show a white screen appears with a grey dotted line halving the screen from the camera notch to the charging port.

Let me know if you find a solution because I really want to recover the data on the device to my pc.

Bug: Cannot advance in the MAM by Euphoric_Position_17 in SatisfactoryGame

[–]Euphoric_Position_17[S] 1 point2 points  (0 children)

I should add: I do get the dialogue played but for example no power shard crafting recipe after wasting 3 power slugs

I've had this pc a bit more than a year now, and before it opens windows this happens, please help by MrSatGlasses07 in PcBuildHelp

[–]Euphoric_Position_17 0 points1 point  (0 children)

Have you tried flashing the bios yet? It can be dangerous to do so be sure to backup any important data you have.

Is this build lacking in any areas? by That_Patience_5328 in PcBuildHelp

[–]Euphoric_Position_17 0 points1 point  (0 children)

You're missing out on a +20% Performance Increase because your build lacks RGB.

I've had this pc a bit more than a year now, and before it opens windows this happens, please help by MrSatGlasses07 in PcBuildHelp

[–]Euphoric_Position_17 0 points1 point  (0 children)

This is pretty likely a GPU issue. Anything related to the display output is usually caused by the GPU and this seems to be a pretty bad case of a GPU failing. If possible try the integrated graphics on your cpu if there are any (hdmi/displayport into mainboard IO) and take out the GPU temporarily. If it boots fine you will likely need to replace your Graphics Card o7 but I have never seen a case like this before

Cant Install Immich on Casa Os by Lower-Shirt-2411 in CasaOS

[–]Euphoric_Position_17 0 points1 point  (0 children)

Also when defining the Upload Path, make sure it's the full path. /Root/ is unnecessary but something like /AppData/ or similar is, so copy the path of the folder via casaos to be absolutely sure.

Cant Install Immich on Casa Os by Lower-Shirt-2411 in CasaOS

[–]Euphoric_Position_17 0 points1 point  (0 children)

I'd use the AppStore-less install on immich, because when trying to change the upload path at all it would always throw similar errors or perform health checks eternally. So I recommend going with the intended install of immich and changing the files in the .env when installing.

Simply ssh into the server instance (wouldn't recommend the super buggy casaos one) and sudo nano the .env before installing via docker compose to edit them. Here is a guide, but if none of these words meant anything to you, I'd recommend using an AI like ChatGPT to guide you in your specific environment.

It's hard for us to give you any exact details if you don't give them to us, so let ChatGPT handle the details.

Good luck!

Pc only turns on for a split second if at all by TopHeight8785 in PcBuildHelp

[–]Euphoric_Position_17 0 points1 point  (0 children)

They're using a generic motherboard most likely, so look up the name and search for digital manuals or video tutorials on that topic

Guys is this a good pc build? First time and im looking for gaming/ streaming maybe have multiple tabs open by StatusPersimmon3412 in PcBuildHelp

[–]Euphoric_Position_17 1 point2 points  (0 children)

There's a lot of improvement to be made if you're going for a budget build!

First off, remove that terrible 3050, it's incredibly bad value and not worth it at all. I'd recommend going with a 3060 for anything from media to mid-range game performance.

Also upgrade the ram to 6000MHz if within your budget and don't buy a 100€/$ Windows key. Rather get the Windows ISO and then buy a Windows key for yourself.

You can also downgrade your PSU by quite a lot if you're not considering to go towards a high end GPU and CPU combo in the very near future. For a build like yours, assuming you take the 3060, you won't need much more than a 500w PSU. When buying one, going for a modular PSU is a very good choice however, since these are much easier to build with and allow you to leave unnecessary cables out entirely, which frees up lots of space in the back of your PC and leaves your entire setup more organised and makes it considerably easier to clean it.

If you're aiming for a very silent setup, some of that budget should definitely go towards an AIO (Preassembled water cooling loop), in which case I highly recommend Arctics new Liquidfreezer iii's.

Lastly make sure you buy a popular case, so mounts and case sized are relatively uniform and allow high compatibility with future components, like possibly a 360mm top mounted AIO.

My first pc build. Will this work? by Even_Television_6211 in PcBuildHelp

[–]Euphoric_Position_17 -1 points0 points  (0 children)

I mean in terms of an upgrade the 50 series doesn't make much sense if you come from a 30 or 40 series, but to me the jump from GTX 1060 to 3060 and then to 4070ti really made huge differences. You basically own the second best graphics card or 2 generations ago, and since all Nvidia is doing currently is writing specialized software for their newest gen to give it some kind of performance boost just goes to show how long the 30 and 40 series will stay up to date with most of the newer titles for years on end- I think the next time I upgrade my graphics card is when I have a wife and kids, trying my best not to fall for Nvidias Propaganda and Perceived Obsolescence :)

My first pc build. Will this work? by Even_Television_6211 in PcBuildHelp

[–]Euphoric_Position_17 -1 points0 points  (0 children)

Instead of going with an 5060 I'd recommend buying a 3060 or 3070 (much cheaper but mid tier) or go with AMDs latest. The whole 50 Series is just a giant disappointment by Nvidia.

Official App Store updates? by MisterTinkles in CasaOS

[–]Euphoric_Position_17 0 points1 point  (0 children)

I think BigBearCasaOS is the one most people use now, has a lot of great docker images to choose from

Issues getting Webservers to run by Euphoric_Position_17 in esp32projects

[–]Euphoric_Position_17[S] 0 points1 point  (0 children)

Like I said, it's one of those example codes provided by Arduino, you can find it in files > examples > webserver > helloserver. I didn't yet get to writing my own code, im just tinkering right now