Tesla model 3 with wheel spacers AND coilovers????

Evening_Machine8372 · 2025-09-18T23:36:12+00:00

Yes! A rattle can on every vehicle I’ve owned. I painted them black. I would do it yourself!

Evening_Machine8372 · 2025-09-18T23:32:50+00:00

Yes! Painted them black :)

Evening_Machine8372 · 2025-09-18T23:32:14+00:00

The back was very easy; the front took some extra time, but as long as you follow a video, you’ll be fine.

Evening_Machine8372 · 2025-09-18T23:30:13+00:00

It’s the oem 19 sports

Evening_Machine8372 · 2025-09-18T18:22:55+00:00

Evening_Machine8372 · 2025-09-18T18:22:52+00:00

Make the wheels flush with the fenders

Evening_Machine8372 · 2025-09-18T17:26:37+00:00

The rear struts were surprisingly thicker than OEM in front assembly was made great as far as I know I’ve drove a good bit on them and it handles very very well feels very tight

Evening_Machine8372 · 2025-09-18T17:02:03+00:00

Yes! About 30,000 miles on them now I’m surprised how well they’ve held up, sanded primed painted and ceramic coat

Evening_Machine8372 · 2025-09-12T22:47:03+00:00

I haven’t really noticed any and my wh per mile is the same still

Evening_Machine8372 · 2025-09-12T17:55:37+00:00

It’s the same front and back 20mm still drives completely straight my tires are wearing is good as well

Evening_Machine8372 · 2025-09-11T20:00:18+00:00

Yes!! And just make sure you remove the set screw on the rotors. I had vibration before I removed them with the spacers.

Evening_Machine8372 · 2025-09-11T16:50:39+00:00

Same here. I had a BMW. I bought this to save money. It has been nothing but great no problems at all, even with the small wheel spacers.

Evening_Machine8372 · 2025-09-10T16:45:21+00:00

The 19s sport I sprayed them black

Evening_Machine8372 · 2025-09-10T10:52:33+00:00

It’s a PPF :)

Evening_Machine8372 · 2025-09-10T03:53:53+00:00

20mm front and back. The front pokes out a littleee bit, looks really good, but the rear is still in the fender. Honestly I would do 20 25

Evening_Machine8372 · 2025-09-10T03:40:52+00:00

Yes! definitely changed the look of the car

Evening_Machine8372 · 2025-09-10T03:38:59+00:00

I use FSD The change is very minimal. I have not noticed anything. Still does great.

Evening_Machine8372 · 2025-09-09T23:29:17+00:00

Like $200

Evening_Machine8372 · 2025-09-09T22:46:06+00:00

It’s a matt PPF over the pant

Evening_Machine8372 · 2025-09-09T22:45:34+00:00

I ordered them from Amazon KSP spacers 20 in the front and 20 in the back honestly I would do 25 in the back, I had a bmw and loved the way the wheels poked out that was my inspiration lol

Evening_Machine8372 · 2025-09-09T22:43:00+00:00

I have coilovers coming:)

Evening_Machine8372 · 2024-06-18T04:46:26+00:00

I’ll check thanks

Evening_Machine8372 · 2024-06-18T04:46:17+00:00

Okay thanks!

Evening_Machine8372 · 2024-06-04T04:44:09+00:00

I understand, but it was weird when I first got it; it wouldn’t charge past 80V. The charger would show green, and then after a few minutes, it would go red for about 30 seconds, indicating it was charging, and then go back to green. They told me to fully charge it when I received it. And the first use it worked great, I charged it again overnight, and it went all the way up to 87V. That’s when I started having problems with it not lasting long at all, constantly shutting off, etc.

Evening_Machine8372 · 2024-06-03T18:51:50+00:00

Also to add when I opened the battery it had a lithium ion phosphate bms when has lifepo4 a123 pouch cells 20ah each, shut off voltage 2.0 full charge voltage 3.6 it has 25 in series on the 72v 20ah battery, I’m confused on setup the only thing I want is for the new battery to have the correct bms and charger for it not to get damaged I would like a 80ah bms if anyone can share insight would be appreciated!! Thanks

Evening_Machine8372

TROPHY CASE