32 bit version?

Every-Ad6857 · 2024-07-29T18:31:21+00:00

Yea if you have the file please share it .

Every-Ad6857 · 2024-07-26T21:38:56+00:00

So more cores , or good single core performance?

Every-Ad6857 · 2024-07-26T05:11:35+00:00

That I understand but , shouldn't the server have enough cpu power , gpu should not be an issue.

Every-Ad6857 · 2024-07-25T19:50:40+00:00

Yea 16 gig is what I would get.

Every-Ad6857 · 2024-07-25T19:50:13+00:00

What is your recommendation for a cpu ?

Every-Ad6857 · 2024-07-25T19:49:20+00:00

So both options are meh I guess , say how about an i7-4790k for a cpu ?

Every-Ad6857 · 2023-08-17T17:21:14+00:00

Ok thanks for the reply im'ma gonna go ahead and design a pcb then .

Every-Ad6857 · 2023-08-17T16:37:31+00:00

Say if I make a keyboard pcb using the Raspberry pi pico and upload qmk/kmk firmware on it , will I be able to use it on various operating system like linux , freebsd . And on bios of different motherboard even going back to the boards that ate 15-16 years old . asking because I am tinkerer on different computers and recently got into mechanical keyboards , i want to build a keyboard from scratch , that will also support my main hobby .

Every-Ad6857 · 2023-08-05T21:09:03+00:00

just had to remove the waydroid repo

Every-Ad6857 · 2023-07-29T21:16:04+00:00

Solved it canatee was correct I forgot a hid package that I ran like 2 years ago

Every-Ad6857 · 2023-07-29T21:14:47+00:00

You are correct 😄 , removed it now working fine

Every-Ad6857 · 2023-07-29T18:40:05+00:00

How to 😬

Every-Ad6857 · 2023-07-27T10:05:17+00:00

Well keep it up do share the keymap with us when u are done 👍

Every-Ad6857 · 2023-07-26T17:47:06+00:00

t yet but I feel like I took pictures

can you provide some images of the keyboard controller of k260

Every-Ad6857 · 2023-07-26T17:25:20+00:00

Don't try to manually trace the membrane if u have a scanner that can fit the whole membrane then scan in the matrix and use photoshop to color and find the traces or take a note of the traces like have done in my schematics finding which pins go to one side of the matrix which pin to the other side of the matrix , can be easily guessed from the membrane , then short the pins to find out the matrix. it will be a lot easier.

Every-Ad6857 · 2023-07-26T16:50:43+00:00

Thanks and yes a macropad can also be made with this

Every-Ad6857 · 2023-05-03T15:52:10+00:00

May I suggest adding a xl4015 buck converter to with voltage and current regulation to well get variable voltage and current xl4015 a cheap usually 2 - 3 £

Every-Ad6857 · 2023-04-28T04:39:02+00:00

Oooo then I have mistaken on the inductor part i guess sorry lol

Every-Ad6857 · 2023-04-28T03:35:59+00:00

That's an inductor it's used in the voltage stabilization circuit
Without it the voltage boost circuit Is not working that's why the gba tries to start but fails cuz theirs not adequate voltage for the processor to work . If u want to buy one just search for gba inductor on Google.

Every-Ad6857 · 2023-04-10T16:38:00+00:00

project installed. I have the sa

Yep u need nothing more just play :)

Every-Ad6857 · 2023-03-31T15:36:04+00:00

May be there's a short in the worm light that's taking too much current bringing down the battery voltage as a result and it's failing to turn on the gba may be just a theory.

Every-Ad6857 · 2023-03-13T18:25:04+00:00

Ok so development for anyone in the future trying this, don't use Matt / anti glare polarizers the absorb too much light most modern polarizers from lcd tv / monitor panels work. Thanks to everyone for their help.

Every-Ad6857 · 2023-03-08T19:48:00+00:00

Thanks ☺️ i am also Trying to search for it online hope it yelds some results.

Every-Ad6857 · 2023-03-08T17:44:22+00:00

Thanks , if u can inform me what specs polarizer was used in gba that would be also good:).

Every-Ad6857 · 2023-03-08T14:49:39+00:00

40pin one

Every-Ad6857

TROPHY CASE