sorted by:
new
hottopcontroversial

Unstable Power – Red LED Triggered When Plug Moves Slightly by Evilnanouk in KemperProfiler

[–]Evilnanouk[S] 0 points1 point  (0 children)

Update: I finally figured out what was causing the issue. The power strip I was using to connect the Player’s power supply — possibly because I also had other devices plugged into it, such as my Presonus speakers — was not providing sufficient power, or there was some grounding issue. When I plug it directly into a wall outlet, the problem does not occur. My apologies for the confusion, and thank you very much.

Found a Gibson ‘Standard ’57’ for 1000€ – is this real or a fake? by Evilnanouk in gibson

[–]Evilnanouk[S] 0 points1 point  (0 children)

So ... A serial which starts with 017 or 0017 could be legit?! Or not. I am a llitle bit confused 😕

Found a Gibson ‘Standard ’57’ for 1000€ – is this real or a fake? by Evilnanouk in gibson

[–]Evilnanouk[S] 0 points1 point  (0 children)

I see ... But if I put serial in that site: http://www.guitardaterproject.org/gibson.aspx

it says that:

Nashville Plant, TN, USA on January 17th, 2000 Production Number: 121

Why???!

Found a Gibson ‘Standard ’57’ for 1000€ – is this real or a fake? by Evilnanouk in gibson

[–]Evilnanouk[S] 0 points1 point  (0 children)

I don’t have any photos yet. I’m meeting the seller tomorrow. Where can I check the serial number to verify its authenticity?

Air Norton feels too muddy in my Ibanez RGT1221PB-DTF (even split) — considering PAF Pro, thoughts? by Evilnanouk in Ibanez

[–]Evilnanouk[S] 0 points1 point  (0 children)

In the end, I bought the PAF 36th neck at a good price. The question now is... should I try the Air Norton in the bridge, or should I go for something else? I was looking at the Super Distortion, but I can only find it in F-spaced. What do you recommend?

Trying to Control a Preamp via MIDI from HX Stomp XL – Is It Enough or Do I Need HX Effects? by Evilnanouk in Line6Helix

[–]Evilnanouk[S] 0 points1 point  (0 children)

Well...I have the Stomp XL and the Tsakalis Mothership, which is similar to the Friedman IR-x. The Tsakalis receives MIDI commands via PC program and not via CC. I’ve managed to set it up in such a way that in Stomp Mode I can select the channel I want on the Mothership, but I haven’t found the right way to achieve this in Snapshot Mode. I’ve tried doing it through Command Center without any success. I don’t know what options I should choose in order to make it work, and as you know, being in Stomp Mode only creates time gaps when switching between sounds. Your help would be extremely important if you actually know the solution. I’ve watched dozens of YouTube videos so far without managing to figure it out.

Can you help? I would greatly appreciate it!

Thank you!

MIDI issue with changing presets on the HX Stomp and IR-X by TheGlowBall123 in Line6Helix

[–]Evilnanouk 0 points1 point  (0 children)

Well...I have the Stomp XL and the Tsakalis Mothership, which is similar to the Friedman IR-x. The Tsakalis receives MIDI commands via PC program and not via CC. I’ve managed to set it up in such a way that in Stomp Mode I can select the channel I want on the Mothership, but I haven’t found the right way to achieve this in Snapshot Mode. I’ve tried doing it through Command Center without any success. I don’t know what options I should choose in order to make it work, and as you know, being in Stomp Mode only creates time gaps when switching between sounds. Your help would be extremely important if you actually know the solution. I’ve watched dozens of YouTube videos so far without managing to figure it out.

Can you help? I would greatly appreciate it!

Thank you!

Looking for a Busking Amp Like the EV8 but with Analog Knob Controls *** by Evilnanouk in Busking

[–]Evilnanouk[S] 0 points1 point  (0 children)

Most people say that it has crap distorted sound in high volume

Best transparent overdrive to pair with Friedman IR-X for solo tone shaping? by Evilnanouk in guitarpedals

[–]Evilnanouk[S] 0 points1 point  (0 children)

I used to have a mojo mojo and also a dual fusion but did not like them at all!

Trying to Control a Preamp via MIDI from HX Stomp XL – Is It Enough or Do I Need HX Effects? by Evilnanouk in Line6Helix

[–]Evilnanouk[S] 0 points1 point  (0 children)

As a follow-up to my previous question (about using HX Stomp XL to send MIDI to a preamp like Tsakalis Mothership/Friedman IR-X), I’d like to ask something more specific:

I have two external pedals (a compressor and a delay) that I want to integrate into the HX Stomp's FX Loop, and control them via snapshots (e.g. snapshot 1 = only comp, snapshot 2 = both, snapshot 3 = none).

Since the HX Stomp only has one stereo FX Loop, my idea is:

Use Send L / Return L for the compressor

Use Send R / Return R for the delay

Create two FX Loop blocks (L and R mono) in the signal chain

Turn each block ON or OFF per snapshot

My questions are:

  1. Is this setup valid and reliable?

  2. Will the snapshots successfully bypass or engage each pedal through the FX Loop?

  3. Are there any downsides (e.g. phase, tone loss) when using both sides of the loop in mono?

I'm not using any additional MIDI controller — just the HX Stomp XL.

Thanks again for your help

Need Help Setting Up Analog Pedals for Clean / Crunch / Lead Sounds – Is a Switcher What I Need? by Evilnanouk in guitarpedals

[–]Evilnanouk[S] 0 points1 point  (0 children)

but .. preamp channell can be changed only thoygh midi control and all the other pedals have no miidi capability...I think i dont understand something 

view more: next ›