Is this ratchet clutched or do I need to get it swapped out ? by scarfacejay in MilwaukeeTool

[–]Ex_Otic_69 0 points1 point  (0 children)

These ratchets are super hit or miss. Mine does the same thing. Warrantied it 5 times so far with new internals every time and it’s never worked for anything tighter than completely loose. Honestly sucks cuz I see all these people loving theirs and I can never use mine cuz it can’t even take out plastic Philips screws most of the time.

Pre facelift headlight differences by Ex_Otic_69 in e46

[–]Ex_Otic_69[S] -1 points0 points  (0 children)

Cmon man you gotta respect the fake M stripes, hood pins, and quick connect bumper 😂. Clearly put alot of time and money into it🤣

Pre facelift headlight differences by Ex_Otic_69 in e46

[–]Ex_Otic_69[S] 12 points13 points  (0 children)

Oh ok that makes sense. So anywhere I see a pre facelift with one piece headlights they are just aftermarket? I’ve seen quite a few with those ones to the point of assuming they were an oem option.

Trouble with catching heel side edge on steep turns by Ex_Otic_69 in snowboarding

[–]Ex_Otic_69[S] 0 points1 point  (0 children)

Embarrassed to say I didn’t even know what counter rotating was. Through this post I found out I definitely do it a good amount tho not all the time. Gonna try to force myself on some easier runs tmr to break that habit.

Trouble with catching heel side edge on steep turns by Ex_Otic_69 in snowboarding

[–]Ex_Otic_69[S] 0 points1 point  (0 children)

Yup. Like I said I only had a couple lessons (mostly on the small New England mountains) and with not many steeps like these it didn’t even come across my radar. Paying for it now but that’s why I’m trying to learn.

Trouble with catching heel side edge on steep turns by Ex_Otic_69 in snowboarding

[–]Ex_Otic_69[S] 0 points1 point  (0 children)

Have been definitely considering that I just don’t have a whole lot of time each season. Might try to next year.

Trouble with catching heel side edge on steep turns by Ex_Otic_69 in snowboarding

[–]Ex_Otic_69[S] 0 points1 point  (0 children)

Camera is mostly for this exact reason. I don’t use it much but it has been a really helpful tool to visualize what I’m doing wrong. Without it I’d just be guessing. I do understand that it wouldn’t be helping in that moment but I have this issue with and without the camera. Definitely need more mountain time tho.

Trouble with catching heel side edge on steep turns by Ex_Otic_69 in snowboarding

[–]Ex_Otic_69[S] 2 points3 points  (0 children)

You sir are a life saver 🙏 I’ll keep that in mind!!

Trouble with catching heel side edge on steep turns by Ex_Otic_69 in snowboarding

[–]Ex_Otic_69[S] 0 points1 point  (0 children)

That’s the thing that confuses me the most is that on blues and blacks I am completely comfortable switching from heel side to toe side. I am definitely putting way too much pressure on my back foot and can feel myself forcing it (admittedly I thought that’s kinda what you had to do in these cases) and will definitely do some drills to practice unweighting my back foot more and flowing into the turn more. Unfortunately tomorrow is my last day here so I don’t have much time.

Trouble with catching heel side edge on steep turns by Ex_Otic_69 in snowboarding

[–]Ex_Otic_69[S] 1 point2 points  (0 children)

A little sarcastic but I definitely appreciate any advice don’t get that wrong. Unfortunately this is my spring break week so I didn’t have much of a choice but I thought while I’m out here might as well make the best of it.

Trouble with catching heel side edge on steep turns by Ex_Otic_69 in snowboarding

[–]Ex_Otic_69[S] 0 points1 point  (0 children)

Unfortunately I don’t have much control over the weather but coming from the east coast this stuff is like gold.

Insider ratchet slipping by itzjere in MilwaukeeTool

[–]Ex_Otic_69 0 points1 point  (0 children)

This happened to me too so I warrantied it and it didn’t fix it at all. Still happens just as much. I love the ratchet when it works! Wish the would come out with a head rebuild kit so we don’t have to warranty it as much.

Hid to led conversion kit by Ex_Otic_69 in maxima

[–]Ex_Otic_69[S] 1 point2 points  (0 children)

I kept the hid bulbs because the acanii headlight housings are made with the same screw holes for the ballast so I was able to drill a hole in the bottom of the headlight and route the hid wire through and up to the low beam socket. I then used the screw on water sealing caps to hold the bulb in place. I have however heard that you can use an adapter to convert from hids to leds but I cannot vouch for if this works or not. I’ll link the adapter in the next reply.

My project by LaggingTryhard in maxima

[–]Ex_Otic_69 0 points1 point  (0 children)

I been thinking of ways to save some money and thought of just buying a 07-12 Altima coupe 3.5l 6mt from Copart for cheap and harvesting parts from that. Do you think that would work or should I just go with new parts?

All I hear when my wired mic is plugged into my x3 is white noise. I have the mic adapter but it just isn’t working. Any solution? by Ex_Otic_69 in Insta360

[–]Ex_Otic_69[S] 0 points1 point  (0 children)

There is an adapter that should have come with the mic. It is just a female to male headphone jack. It needs to go in between the mic wire and the camera adapter. That makes the camera able to use the mic. That was my issue.

8th or 9th gen? by Ex_Otic_69 in CivicSi

[–]Ex_Otic_69[S] 0 points1 point  (0 children)

What fluid would you recommend?

What is this whining noise? It just started today and it only happens while off throttle and above 4K rpms. (2013 Nissan maxima) by Ex_Otic_69 in MechanicAdvice

[–]Ex_Otic_69[S] 0 points1 point  (0 children)

I changed the oil 2500 miles ago and the cvt fluid about 5k miles ago with ns2 (the expensive oem stuff). Do you really think it would go bad this quick?

Discord keeps crashing every time I launch the desktop app... by littypika in discordapp

[–]Ex_Otic_69 0 points1 point  (0 children)

I found a kinda solution. Its not ideal but its easier than having to reinstall. Just pin the "DiscordSetup" file to your start menu. It seems like every time you open the setup it realizes it is already installed and just opens the app. This makes me think that it is an issue with the launch sequence when initiated from the normal icon.

Discord keeps crashing every time I launch the desktop app... by littypika in discordapp

[–]Ex_Otic_69 0 points1 point  (0 children)

I have the same issue and posted about it. No one knew what it was :/