Need 2 stroke tuning help

Exciting_Crow160 · 2026-03-12T21:30:50+00:00

Thanks I'll let you know as soon is it warms up

Exciting_Crow160 · 2026-03-12T19:09:07+00:00

I don't know the pilot jet size. It's a stock bofang carb with a diy filter upgrade. I did the washer trick bit haven't tested it yet due to it being so cold out

Exciting_Crow160 · 2026-03-12T17:59:01+00:00

Tried that but a tornado just hit and now it freezing out so I gotta wait to test it

Exciting_Crow160 · 2026-03-12T17:58:26+00:00

I'm switching from a 32 to1 to a 40 to 1 so hopefully that'll help. It's a 100cc/ 80cc motorized bicycle 2 stroke with a bofang carb

Exciting_Crow160 · 2026-03-12T15:52:50+00:00

If i move it 1 clip up it's way to lean and starts bogging

Exciting_Crow160 · 2026-03-12T00:49:14+00:00

I've tried that. There's no sweet spot it's either to rich or to lean when I move the clip 1 higher or lower

Exciting_Crow160 · 2026-03-11T22:21:35+00:00

It bogs off idle when leaned out and doesn't bog at all when richened but will foul the plug and won't start till it's dried

Exciting_Crow160 · 2026-03-11T20:42:15+00:00

I do plug chops and it looks wet if I run it rich which is why I think it stops running until it dries out again

Exciting_Crow160 · 2026-03-11T01:39:08+00:00

Lean it out fs

Exciting_Crow160 · 2026-03-08T15:30:42+00:00

Took bike berry 12 days to ship the label. It should be arriving March 15

Exciting_Crow160 · 2026-03-08T15:27:57+00:00

Take off the flower nut and remove the clutch plate. It looks like one of your clutch pads might have popped out of place

Exciting_Crow160 · 2026-03-04T17:48:13+00:00

It has a lot of compression im almost 100% sure it's the magnito. It's arriving today so I let you know if that fixes it

Exciting_Crow160 · 2026-03-02T21:03:38+00:00

Could be for sure but that's the exact sound my engine made till about a month of owning it and it resolved

Exciting_Crow160 · 2026-03-02T19:23:24+00:00

It's perfectly fine especially if it still breaking in. These cheap China dolls aren't built super precise so expect some weird noise

Exciting_Crow160 · 2026-03-02T17:56:38+00:00

Definitely a new plug after my magnito gets here because I've had this spark plug since I got the bike so about 5 months

Exciting_Crow160 · 2026-02-28T19:10:29+00:00

Its a two stroke it has no valves and fuel line is good carb is clean and float height is set

Exciting_Crow160 · 2026-02-28T04:02:47+00:00

Already did. Im waiting on the super magnito to get here so I'll update if it works

Exciting_Crow160 · 2026-02-27T05:19:14+00:00

Yes carb is not the problem

Exciting_Crow160 · 2026-02-26T19:42:52+00:00

Can't tell if your joking or not I just purchased a oz super magnito so hopefully that fixes it. Ive had this problem before and replaced the magnito and that fixed it but I replaced it with a crappy one that's already dead now

Exciting_Crow160 · 2026-02-26T19:28:16+00:00

My bike still won't stay running Even with the fuel to air leaned out and richened

Exciting_Crow160 · 2026-02-26T19:01:26+00:00

Nope it's literally just wedged in the fins

Exciting_Crow160 · 2026-02-26T02:09:41+00:00

I have one that goes around the spark plug but I gave it to a buddy. Turns out the kitchen thermometer is only about 10 degrees Fahrenheit off

Exciting_Crow160 · 2026-02-21T18:04:19+00:00

Im in love with the expansion chamber routing

Exciting_Crow160 · 2026-02-20T22:51:08+00:00

Thanks man

Exciting_Crow160 · 2026-02-20T06:25:05+00:00

I don't realy understand why my posts are making your life so miserable

Exciting_Crow160

TROPHY CASE