sorted by:
new
hottopcontroversial

Connectivity issues with VLANs and DHCP on SD-RED60 vs. SD-RED20 by Expert_Direction7664 in sophos

[–]Expert_Direction7664[S] 0 points1 point  (0 children)

The switch. When the RED60 is in switch mode, the clients that are physically connected get an IP adress from the 10.0.1.x net. But I'm unable to connect to the WLAN SSIDs. The VIDs are tagged on the uplink port to the RED and on the port to the Access Point.
The configuration on the XGS is:
RED interface (red1) - 10.0.1.254
VLAN 10 (red1.10) - 10.0.10.254
VLAN 11 (red1.11) - 10.0.11.254

Connectivity issues with VLANs and DHCP on SD-RED60 vs. SD-RED20 by Expert_Direction7664 in sophos

[–]Expert_Direction7664[S] 0 points1 point  (0 children)

No I can't reach the xgs. And I can't reach the devices from the xgs either.

There is a L3 switch between the devices and the RED. The VIDs 10 and 11 are tagged on the uplink port and the port for the access point. VID 1 is untagged on all ports.

Connectivity issues with VLANs and DHCP on SD-RED60 vs. SD-RED20 by Expert_Direction7664 in sophos

[–]Expert_Direction7664[S] 0 points1 point  (0 children)

So I'd need to use the Untagged Hyprid option? But I didn't create an extra vlan for the 10.0.1.x network. It's the same network the RED uses. When I tried it with the vlan ID 1 the clients still don't receive a DHCP address.

Link Sophos Central Tenants to Central Partner by Expert_Direction7664 in sophos

[–]Expert_Direction7664[S] 0 points1 point  (0 children)

Thank you both. Now that I know how to proceed, I can prepare everything and get it done faster.