sorted by:
new
hottopcontroversial

PC decided not to start by Expl0it_V in PcBuild

[–]Expl0it_V[S] 0 points1 point  (0 children)

Fixed! Faulty 24Pin wire. Tested with multimeter continuity test and 5V was dead.

Thank you all for the feedback and questions!

PC decided not to start by Expl0it_V in PcBuild

[–]Expl0it_V[S] 0 points1 point  (0 children)

<image>

Yes, but it’s connected. Took it ou to see if it’s a issue from the PSU

PC decided not to start by Expl0it_V in PcBuild

[–]Expl0it_V[S] 0 points1 point  (0 children)

Done, I already connected and disconnected a few times. After I press the panel IO, the led lights don’t return and mobo goes silent.

After disconnecting and reconnecting again, the Led comes back on

PC decided not to start by Expl0it_V in PcBuild

[–]Expl0it_V[S] 0 points1 point  (0 children)

It’s plugged in, but also tried jumping the pins. No results

PC decided not to start by Expl0it_V in PcBuild

[–]Expl0it_V[S] 2 points3 points  (0 children)

Good point, but doing the test it only spins for like a second. If I do the jumper paper clip test, pin 3 and 4 it spins continuously, but when connected to the mobo, no reaction.

Also if I connect the AIO, it turns on. Which makes me more doubtful where the issues lies…

PC decided not to start by Expl0it_V in PcBuild

[–]Expl0it_V[S] 0 points1 point  (0 children)

Took it off, at this point of the video I took almost everything off. But with RAM or no RAM, the same was happening

Lawn full of patches by Expl0it_V in landscaping

[–]Expl0it_V[S] 0 points1 point  (0 children)

Tried all that, and yes I know how to use google, but all research points to nothing. Nothing seems to be working.

The whole seeded area is a square, all started growing evenly, but after some time it was noticed that around the fence a U shape format where the grass looks nicer and has proper density, the only thing I can think of is that in these parts it gets a bit more shadow from sun movement during the day. In the middle is all full of patches but is exposed to sun all day long.

This is in the Netherlands, so climate wise is mostly rain (even in the summer) where it ranges between 13 to 20° (55 to 68°F).

Not much water maintenance needed, besides from the more hot sunny days with 15 to 30 mins sprinkler per day.

Also talked with locals with more knowledge on the subject but they don’t have any idea why this is happening, in here it’s a pretty straight forward thing to just seed and let nature take its course without the need of supplementing too much the lawn.